• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.161-163
• /
• 2006

This paper introduce the technology of peak demand reduction using automatic water tank pumping system on the apartment. That systems on the apartments installed water tank can control pumping(electricity) demand. Generally, system peak demand is occurred at the same time on workday and many water pumps consume electric power randomly. At this point, shift of operating time of water pump can reduce peak demand using automatic water tank pumping system. We were operating this system on some apartments for test of effect of peak demand reduction. and we represent result of demand shift. This result suggests that spread of the automatic water pumping system can contribute to reduce system peak demand and reduce system operation cost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.246-250
• /
• 1989

Owing to the rapid development of economy and the higher living standard of people, electricity demands have growth and the peak load has been increased rapidly. To cope with this impacts and to reduce the cost of service,utilities are conserned about power load management program. This paper shows a scheme of power load control and the basic structure of direct load control system. And also radio control method using the public pager which is one of the best economical and serviceable method in techniques will be introduced briefly.

• 한국통신학회논문지
• /
• 제32권7A호
• /
• pp.694-699
• /
• 2007

본 논문에서는 레일리 페이딩 채널환경에서 폐루프 송신 안테나 다이버시티 시스템을 위한 최적의 안테나 가중치 방식을 연구한다. 평균전력 및 첨두 전력의 제한이 있는 경우에 폐루프 송신 안테나 다이버시티의 평균 비트 오류율을 최소화하는 최적의 송신 안테나 가중치를 닫힌 형식의 수학식으로 유도한다. 본 논문의 결과로부터 첨두 전력의 제한으로 인한 평균 비트 오류율 성능의 열화는 사용가능 한 평균전력이 커질수록 그리고/또는 송신 안테나 개수가 증가할수록 그 성능 열화의 정도가 더욱 커짐을 알 수 있다.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권8호
• /
• pp.457-462
• /
• 2003

This paper presents an optimal operating strategy of distributed generation (DG) with reliability worth evaluation of distribution systems. Using DG for peak-shaving unit could reduce the overall system operating cost, and using DG for standby power unit could reduce the customer interruption cost. If DG operating cost is less than utility power cost in peak time, DG should be running to reduce the overall system operating cost. When customer interruption cost enlarges, however, standby power strategy may be the better operating strategy than peak-shaving strategy. Selection of whether DG should be operated for peak-shaving or for standby power, needs the accurate reliability worth evaluation and the accurate power cost evaluation. Instead of using annual average reliability worth, the concept of hourly reliability worth is introduced in this paper to determine the optimal operating decision of DG. Applying suggested hourly reliability worth, the distribution companies that possess DG could set up the optimal operating strategy of DG.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.715-722
• /
• 2012

New discrete time domain models for the peak current controlled (PCC) power LED drivers in continuous conduction mode include for the first time the effects of the time delay in the pulse-width-modulator. Realistic amounts of time delay are found to have significant effects on the average output LED current and on the critical inductor value at the boundary between the two conduction modes. Especially, the time delay can provide an accurate LED current for the PCC buck converter with a wide input voltage. The models can also predict the critical inductor value at the mode boundary as functions of the input voltage and the time delay. The overshoot of the peak inductor current due to the time delay results in the increase of the average output current and the reduction of the critical inductor value at the mode boundary in all converters. Experimental results are presented for the PCC buck LED driver with constant-frequency controller.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.169-174
• /
• 2015

본 연구에서는 그래핀의 인위적인 합성방법인 화학기상증착법을 활용하여 합성 파라미터들을 변화시켜줌으로써 그래핀의 물성을 조절하는 연구를 수행하였다. 먼저, 메탄가스를 탄소원으로 순수 그래핀을 합성하였고, 액상의 피리딘을 원료로 사용하여 질소가 도핑된 그래핀을 합성하였다. 각각의 그래핀의 물성은 라만 분광법, X선 광전자 분광법(XPS)을 통한 기초 광물성 측정과 게이트 전압에 따른 그래핀 채널의 전류-전압 응답특성을 통한 전기적 수송현상 측정에 의해 평가되었다. 메탄가스로 합성된 그래핀의 라만 분광 스펙트럼에서는 G-peak과 2D-peak가 선명히 보였고, XPS에서 C1s-peak가 선명하였고, 아울러 전하중성점은 게이트 전압 약 +4 V 정도에서 나타났다. 피리딘을 원료로 합성된 그래핀의 라만 분광 스펙트럼에서는 D-peak, G-peak 그리고 다소 약해진 2D-peak 등이 보였고, XPS에서는 C1s-peak은 물론 N1s-peak도 나타났으며, 전하중성점은 게이트 전압 약 -96 V 정도에서 나타났다. 결과적으로 우리는 화학기상증착법을 활용하여 그래핀의 물성을 성공적으로 조절하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.7-8
• /
• 2008

It is well-known that one of the most serious problems of Orthogonal Frequency Divison Multiplexing (OFDM) is its high Peak-to-Average Power Ratio (PAPR) which seriously limits the power efficiency of High Power Amplifier (HPA). This paper introduces various methodologies to cope with this problem.

• 한국운동역학회지
• /
• 제19권1호
• /
• pp.139-148
• /
• 2009

본 연구는 Thera-Band를 이용해 단축성 수축과 신장성 수축이 혼합된 저항운동을 실시하는 것이 단축성 수축 저항 운동만을 실시하는 것보다 근력증진에 더 효과적인지를 알아보고자 하는 논문이다. 연구대상자는 부산광역시 소재 S 대학교에 재학 중인 학생 30명 이었으며, 30명을 무작위로 단축성 수축과 신장성 수축 운동군, 단축성 수축 운동군, 무운동군으로 나누어 4주 동안 운동을 실시하였다. 근력 측정은 등속성 운동기기인 CON-TERX를 이용하였으며, 각속도는 $60^{\circ}$/sec, $120^{\circ}$/sec이었다. 4주 운동 후, 단축성 수축과 신장성 수축 운동군의 경우 각속도 $60^{\circ}$/sec에서 단축성과 신장성 최대 토크와 최대 파워, 각속도 $120^{\circ}$/sec에서 단축성 최대 파워가 통계적으로 유의하게 증가하였다. 반면 단축성 수축 운동군은 각속도는 $60^{\circ}$/sec와 $120^{\circ}$/sec의 최대 파워에서만 유의한 증가가 있었다. 반면 무운동군은 변화가 없었다. 따라서 Thera-Band를 이용해 단축성 수축과 신장성 수축이 혼합된 운동을 실시하는 것이 단축성 수축 운동만을 실시하는 것보다 근력증진에 더 효과적임을 알 수 있었다.

• 산업경영시스템학회지
• /
• 제43권2호
• /
• pp.1-13
• /
• 2020

There are several methods of peak-shaving, which reduces grid power demand, electricity bought from electricity utility, through lowering "demand spike" during On-Peak period. An optimization method using linear programming is proposed, which can be used to perform peak-shaving of grid power demand for grid-connected PV+ system. Proposed peak shaving method is based on the forecast data for electricity load and photovoltaic power generation. Results from proposed method are compared with those from On-Off and Real Time methods which do not need forecast data. The results also compared to those from ideal case, an optimization method which use measured data for forecast data, that is, error-free forecast data. To see the effects of forecast error 36 error scenarios are developed, which consider error types of forecast, nMAE (normalizes Mean Absolute Error) for photovoltaic power forecast and MAPE (Mean Absolute Percentage Error) for load demand forecast. And the effects of forecast error are investigated including critical error scenarios which provide worse results compared to those of other scenarios. It is shown that proposed peak shaving method are much better than On-Off and Real Time methods under almost all the scenario of forecast error. And it is also shown that the results from our method are not so bad compared to the ideal case using error-free forecast.

• 조명전기설비학회논문지
• /
• 제26권11호
• /
• pp.75-80
• /
• 2012

In this paper, the operational characteristics due to the introduction of the superconducting fault current limiter(SFCL) with a peak current limiting function were analyzed in the power distribution system. The parallel structure of the superconducting element can operate the peak current limiting function depending on the transient amplitude of fault current. We studied the operating characteristics of the introduction of the SFCL with a peak current limiting function in the power distribution system. Furthermore, we were analyzed between the SFCL with a peak current limiting function and the protection devices in the power distribution system, through the short circuit experiments.