• Asian Pacific Journal of Cancer Prevention
• /
• 제15권19호
• /
• pp.8149-8153
• /
• 2014

Background: To compare the value of contrast-enhanced ultrasound (CEUS) qualitative and quantitative analysis in the identification of breast tumor lumps. Materials and Methods: Qualitative and quantitative indicators of CEUS for 73 cases of breast tumor lumps were retrospectively analyzed by univariate and multivariate approaches. Logistic regression was applied and ROC curves were drawn for evaluation and comparison. Results: The CEUS qualitative indicator-generated regression equation contained three indicators, namely enhanced homogeneity, diameter line expansion and peak intensity grading, which demonstrated prediction accuracy for benign and malignant breast tumor lumps of 91.8%; the quantitative indicator-generated regression equation only contained one indicator, namely the relative peak intensity, and its prediction accuracy was 61.5%. The corresponding areas under the ROC curve for qualitative and quantitative analyses were 91.3% and 75.7%, respectively, which exhibited a statistically significant difference by the Z test (P<0.05). Conclusions: The ability of CEUS qualitative analysis to identify breast tumor lumps is better than with quantitative analysis.

• 한국식품위생안전성학회지
• /
• 제15권3호
• /
• pp.235-240
• /
• 2000

식품의 항균물질 분리에 있어 여러 가지 방법이 있지만 오차와 손실이 많아 실용화 하기에는 많은 문제점이 있다. 현재 일반적인 분리법으로 유기용매분획법, 크로마토그래피 등이 있으나, 많은 시간과 노력을 필요로 하며 시료에 따라 항균활성이 소실되는 경우가 많다. 본 연구는 전편의 '부추의 미생물학적 항균활성 특성과 가공식품에의 응용'에 이어 부추의 항균활성 물질을 효과적으로 분리하기 위한 방법을 정립하고 항균활성 물질을 확인하였다. 부추의 항균활성 물질 분리를 위하여 ultrafiltration, liquid-liquid extraction, TLC, HPLC 순으로 정제하였다. Ultrafiltration 결과 항균물질은 분자량 5,000 dalton 이하의 저분자 물질이었고, TLC로 분리된 8개의 spot중 대조군에 비하여 높은 항균활성을 나타내는 1개의 spot을 추출하여, HPLC로 유효 peak 2개를 얻었고 각 peak성분을 GC/MS로 확인한 결과 cis-propenyl methyl disulfide, 5-methyl methylthiosulphonate, dimethyl disulfide등의 황화합물로 구성된 복합물질로 확인되었다.

• 대한의용생체공학회:의공학회지
• /
• 제27권6호
• /
• pp.370-375
• /
• 2006

The purpose of this work is to predict the systolic blood pressure (BP) during exercise from pulse transit time (PTT) for warning of possible danger. PTT was calculated as the time between R-peak of ECG and the peak of differential photoplethysmograph (PPG). For the PTT-BP model, we used regress equations from previous studies and 3 kinds of new models combining linear and nonlinear regress equation. The model parameters were estimated with the data measured under low to middle intensity exercise, and then was tested with the data measured under high intensity exercise. Predicted BP values after high intensity exercise were compared with those measured by cuff-type sphygmomanometer. The results showed that the error between measured and predicted values were acceptable for the monitoring BP. We tested PTT-BP models 1 month after the identification without further calibration. Models could predict the BP and the errors between measured and predicted BP were about 5mmHg. The suggested system is expected to be helpful in recognizing any danger during exercise.

• 한국인터넷방송통신학회논문지
• /
• 제9권6호
• /
• pp.9-14
• /
• 2009

본 논문에서는 단일 주파수 망을 이용하는 AT-DMB 시스템에서의 효율적인 송신기 검출을 위한 확산코드 슬라이싱 기술을 제안하였다. 각 송신 단말기 신호에 상관특성이 좋은 고유의 확산코드를 AT-DMB 프레임의 Null 심벌의 일부에 나누어 할당하고, 수신기에서는 송신 단말기의 고유 코드를 이용하여 다른 단말기의 신호 간섭 상황 하에서도 원하는 신호를 검출하여 수신할 수 있게 한다. 제안된 기법에 의해 얻어진 송신기 정보는 주파수를 효율적으로 사용하기 위한 기술인 SFN 구현을 위해 필요하다. 본 논문의 결과는 무선 디지털 방송 통신 시스템 구현에 적용될 수 있다.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2265-2267
• /
• 2007

The purpose of this work is to compare the local fitting and global fitting approaches while applying regression model to the PTT-BP data for the prediction of exercise blood pressures. We used linear and nonlinear regression models to represent the PTT-BP relationship during exercise. PTT-BP data were acquired both under resting state and also after cycling exercise with several load conditions. PTT was calculated as the time between R-peak of ECG and the peak of differential photo-plethysmogram. For the identification of the regression models, we used local fitting which used only the resting state data and global fitting which used the whole region of data including exercise BP. The results showed that the global fitting was superior to the local fitting in terms of the coefficient of determination and the RMS (root mean square) error between the experimental and estimated BP. The nonlinear regression model which used global fitting showed slightly better performance than the linear one (no significant difference). We confirmed that the wide-range of data is required for the regression model to appropriately predict the exercise BP.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1720-1723
• /
• 2000

Boron doped conducting diamond thin film were grown on Si substrate by microwave plasma chemical vapor deposition from a gaseous feed of hydrogen, acetone/methanol and solid boron. The doping level of boron was controlled from 0ppm to $10^4$ppm (B/C). The Si substrate was tilted ca. 10$^{\circ}$ to make Si substrate have different height and temperature. Experimental results show that same condition but different temperature of Si substrate by height made different crystalline of diamond thin film. There were appeared 3$\sim$4 step of different crystalline morphology of diamond. To characterize the boron-doped diamond thin film, Raman spectroscopy was used for identification of crystallinity. To survey surface morphology, microscope was used. Grain size was changed gradually by different temperature due to different height. The Raman spectrum of film exhibited a sharp peak at 1334$cm^{-1}$, which is characteristic of crystalline diamond. The lower position of diamond film position, the more non-diamond component peak appeared near 1550$cm^{-1}$.

• 약학회지
• /
• 제56권4호
• /
• pp.217-221
• /
• 2012

To determination of antioxidant substance homoorientin, from Phyllostachys bambusoides leaves, the ultrasonic extraction and HPLC on-line $ABTS^+$ screening method were empolyed. Also, the various experimental variables such as the frequency and time of ultrasonic system were investigated and homoorientin was extracted efficiently at the low frequency 35 kHz and the extraction time 60 min. The values were positive peak 1574.71 (relative area, 23.67%) and negative peak 6924.34 (relative area, 1.23%), respectively. This HPLC on-line $ABTS^+$ screening method was rapid and efficient to search for antioxidants from natural products. These results will provide a database for investigating the constituents of natural products and the resources of pharmaceutical and cosmetic products.

• 문화기술의 융합
• /
• 제5권3호
• /
• pp.305-310
• /
• 2019

본 연구에서는 단자유도계 구조물의 자유진동응답으로부터 점성감쇠와 마찰감쇠의 영향을 정확히 식별하는 방법을 제시하였다. 제안방법을 검증하기 위해서 우선, 감쇠항으로써 점성감쇠와 마찰감쇠를 동시에 고려한 단자유도계의 변위 및 가속도 자유진동응답에 대해서 기술하였다. 다음으로, 서로 인접하는 두 개의 변위 또는 가속도 피크응답의 진폭을 이용하여 점성감쇠 및 마찰감쇠를 식별하는 관계식을 유도하였다. 마지막으로, 단자유도계에 대한 수치해석을 수행하여 유도된 관계식으로부터 점성감쇠와 마찰감쇠를 식별하는 방법을 검증하였다.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4220-4225
• /
• 2022

Monte Carlo (MC) simulations are increasingly being used as an alternative or supplement to the gamma spectrometric method in determining the full energy peak efficiency (FEPE) necessary for radionuclide identification and quantification. The MC method is more advantageous than the experimental method in terms of both cost and time. Experimental calibration with standard sources is difficult, especially for specimens with unusually shaped geometries. However, with MC, efficiency values can be obtained by modeling the geometry as desired without using any calibration source. Modeling the detector with the correct parameters is critical in the MC method. These parameters given to the user by the manufacturer are especially the dimensions of the crystal and its front edge, the thickness of the dead layer, dimensions, and materials of the detector components. This study aimed to investigate the effect of the front edge geometry of the detector crystal on efficiency, so the effect of rounded and sharp modeled front edges on the FEPE was investigated for <300 keV with three different HPGe detectors in point and volume source geometries using PHITS MC code. All results showed that the crystal should be modeled as a rounded edge, especially for gamma-ray energies below 100 keV.

• Smart Structures and Systems
• /
• 제31권6호
• /
• pp.601-619
• /
• 2023

In this study, the accuracy of a real-time hybrid test (RTHT) employed for a performance test of a tuned mass damper (TMD) on an offshore wind turbine (OWT) with a complicated jacket-type supporting structure is quantified and evaluated by comparing the RTHT results with the experimental data obtained from a shaking table test (STT), in which a 1/25-scale model for a typical 5-MW OWT controlled by a TMD was tested. In the RTHT, the jacket-type OWT structure was modelled using both multiple-DOF (MDOF) and single-DOF (SDOF) numerical models. When compared with the STT test data, the test results of the RTHT show that while the SDOF model, which requires less control computational time, is able to well predict the peak responses of the nacelle and TMD only, the MDOF model is able to effectively predict both the peak and over-all time-history responses at multiple critical locations of an OWT structure. This also indicates that, depending on the type of structural responses considered, an RTHT with either an SDOF or a MDOF model may be a promising alternative to the STT to assess the effectiveness of a TMD for seismic mitigation in an OWT context.