The purpose is to study the identification method of Huangjinju powder for injection and the medicinal materials by the fingerprint off-ray Diffraction Fourier (XRDF). We used the same method on both the studying of Huangjinju and the medicinal materials. Then we selected a few components alignment to compare. We analyzed the data by setting up the deviation $d({\AA})$ as ${\pm}0.05$ to calculate the rate of special mark on the sample (Px) and on the patent (P). The special XRDF of Huangjinju$[d({\AA})/(I/I_0)]$ have 5 peaks that have not expressed in medicinal materials. Therefore Px is 22.73%. Flos Trollii Chinensis has 3 special marks and Px is 17.65%. Flos Chrysanthemi Indici has 1 special mark and Px is 3.57%. Its coincided interplanar spacing with the patent is $2.907{\AA}$. Flos Lonicerae Japonicae has 6 special marks and Px is 23.08%. Its special mark in the patent are 4.95/14 and 4.50/15, respectively. The P is 9.09%. Its coincided interplanar spacing with the patent is $2.910{\AA}\;and\;3.05{\AA}$, respectively. The number of special XRDF mark peaks of baicalin is 9 and Px is 18.37%. Its coincided interplanar spacing with the patent is $2.910{\AA}$. It has visible mark and specificity adopting XRDF fingerprint to identify Huangjinju and medicinal materials. Establishing the quality standard is a synthetic index that depends both on special marks in the medicinal materials of the patent and on the coincidence peak data.
Journal of Korean Society for Atmospheric Environment
/
v.17
no.2
/
pp.133-145
/
2001
The receptor modeling is one of the statistical methods to achieve reasonable air pollution strategies. The pur-pose of this study was to survey the concentration variability oi inorganic elements and ionic species in the PM-10 particles, to qualitatively characterize emission sources by an advanced algorithm called positive matrix factoriza-tion(PMF) as a receptor model that can strictly provide results in every loading matrix. A total of 254 samples was collected by a PM-10 high volume air sampler from Mar. 1997 to Feb. 1998 in Kyung Hee University at Suwon Campus. Fourteen chemical species(Zn, Cu, Fe, Pb, Al, Mn, $Na^{+}$, NH$_4$+, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, $SO_4^{2-}$, $NO_{3}^{-}$, and $Cl^{-}$) were determined by AAS and IC methods. The study results showed that the average monthly concentration of PM-10 particles were 86.3$\mu\textrm{g}$/$\textrm{m}^3$ in March (maximum) and 28.5$\mu\textrm{g}$/$\textrm{m}^3$ in August(minimum), respectively. The concentrations of Na+, NH$_4$+, $K^{+}$ and $Cl^{-}$ in winter, $Mg^{2+}$, $Ca^{2+}$ and $NO_{3}^{-}$, in spring, and $SO_4^{2-}$ in summer showed the largest peak concentration for the respective season. Through and app-lication of a PMF program of Pm-10 concentration data of Suwon, 9 sources were qualitatively identified , such as incineration source, oil burning source, soil related source, open burning source automobile source, coal burning sources, secondary sulfate related source, and secondary nitrate related source.
Park, Young;Kim, Hang-Rae;Rhu, Ho-Joon;Kim, Jae-Won
Proceedings of the Korea Contents Association Conference
/
2003.11a
/
pp.120-123
/
2003
In this paper, a digital watermarking scheme whichis effective in protecting a copyright of video image under an image transformation and impulse noise is proposed. The proposing scheme is to use a coded watermark that insert the personal ID of copyrighter. The recovery ability is improved by the coded watermark. Also the coded watermark is abel to trace the illegal distributors. Binary image is used as watermark image, the value of PSNR and recovered rates of watermark are obtained in order to confirm the required invisibility and robustness in watermark system. The experimental results show that image quality is less degraded as the PSNR of 98.21 ㏈. It is also observed that excellent watermark recovery is achieved under the image transformation and impulse noise.
Kim, Jong-Whan;Jo, Yo-Na;Rho, Young-Soo;Seo, Seong-Hoon;Jung, Jee-Chang;Chang, Sung-Goo;Lee, Kyoe-Heung;Lee, Joo-Han;Lee, Kyung-Tae
Journal of Pharmaceutical Investigation
/
v.28
no.3
/
pp.171-175
/
1998
KHPC-002 $[(trans-l-diaminocyclohexane-bis-l,2(diphenylphosphinoethane)platinum)\;{\cdot}2NO_3]$ and $KHPC-006[(cis-diaminocyclohexane-bis-1,2(diphenylphosphinoethane)platinum)\;{\cdot}2NO_3]$ were synthesized as candidates for third platinum antitumor agent. Before their pharmacokinetic study, we optimized the analytical condition with HPLC and identified the major metabolites in the rat plasma. HPLC analysis by $C_{18}$ reverse-phase column showed that standard peak of both compounds appeared rapidly at around 1 minutes, whereas metabolites of KHPC-002 and KHPC-006 which were extracted from plasma after single I.V. administration in rats or incubation for 24 hr at $37^{\circ}C$ showed retention time of $10{\sim}11$ minutes. These metabolites were identified as the major compound by Matrix Associated Laser Deposition/Ionization (MALDI), which only lose the 2 molecules of $NO_3$. Based on these results, we suggest that the major metabolites of KHPC-002 and KHPC-006 were [trans-l-diamino-cyclohexane-bis-l,2(diphenylphosphinoethane)platinum] and [cis-diaminocyclohexane-bis-l.2(diphenylphosphinoethane)platinum], respectively.
Journal of the Institute of Electronics Engineers of Korea SC
/
v.48
no.6
/
pp.43-50
/
2011
Currently, conventional security methods including IC card or password type method are quickly switched into biometric security systems in various applications and the electrocardiogram (ECG) has been considered as one of novel biometrics way. However, conventional ECG based biometrics used lead II signal which conventionally used for formulaic signal to heart disease diagnosis and it is not suitable for biometrics since it is rather difficult to find consistent features for heart disease patents. To overcome this problem, we developed new biometrics system using ECG lead III signals. For wave extraction, signal peak points are extracted through AAV algorithm. For feature selection, extracted waves are categorized into one of four wave types and total twenty two features including number of vertices, wave shapes, amplitude information and interval information are extracted based on their wave types. Experimental results for thirty-six people showed 100% specificity, 95.59% sensitivity and 99.17% of overall identification accuracy.
Extensive previous studies on taxonomy, behavior/bionomics and control of Anopheles sinensis are reviewed and summarized. Recent molecular identification revealed that the population of An. sinensis complex includes An. sinensis, An. pullus, An. lesteri and at least two new species, and An. yatsushiroensis is synonmy of An. pullus. An. sinensis is the main vector specie of vivax malaria in Korea. Larvae of An. sinensis breed in wide range of habitats which are naturally-made clean water, stagnant or flowing; main habitats include rice fields, ditches, streams, irrigation cannals, marshes, ponds, ground pools, etc. Their host preferences are highly zoophilic. Human blood rate is very low ($0.7-1.7\%$); nevertheless An. sinensis readily feeds on man when domestic animals are not found near by. They feed on hosts throughout the night from dusk to dawn with a peak period of 02:00-04:00 hours; they are slightly more exophagic (biting outdoors); much larger numbers come into the room when light is on. Main resting places are outdoors such as grasses, vegetable fields and rice fields. A mark-release-recapture study resulted that $37.1\%$ was recaptured within 1 km, $29.4\%$ at 1-3 km, $21.1\%$ at 3-6 km, $10.3\%$ at 6-9 km and $2.1\%$ at 9-12 km distance. An. sinensis hibernate outdoors (mostly under part of dense grasses) during October-March. At the end of the hibernation period (March-April) they feed on cows at daytime. Until today any single measure to effectively control An. sinensis population has not been found. Indoor residual spray with a long-lasting insecticide can not reduce vector population densities, but shorten their life spans in some degree, so contributes to malaria control.
Kim, Hack-Jin;Yu, Eun-Jong;Kim, Ho-Geun;Lee, Sang-Hyun;Cho, Seung-Ho;Chung, Lan
Proceedings of the Korean Society for Noise and Vibration Engineering Conference
/
2008.04a
/
pp.647-652
/
2008
This paper focused on the application of finite element model updating technique to evaluate the structural properties of the reinforced concrete specimen using the data collected from shaking table tests. The specimen was subjected to six El Centro(NS, 1942) ground motion histories with different Peak Ground Acceleration(PGA) ranging from 0.06g to 0.50g. For model updating, flexural stiffness values of structural members(walls and slabs) were chosen as the updating parameters so that the converged results have direct physical interpretations. Initial values for finite element model were determined from the member dimensions and material properties. Frequency response functions(i.e. transfer functions), natural frequencies and mode shapes were obtained using the acceleration measurement at each floor and given ground acceleration history. The weighting factors were used to account for the relative confidence in different types of inputs for updating(i.e. transfer function and natural frequencies). The constraints based on upper/lower bound of parameters and sensitivity-based constraints were implemented to the updating procedure in this study using standard bounded variable least-squares(BVLS) method. The veracity of the updated finite element model was investigated by comparing the predicted and measured responses. The results indicated that the updated model replicates the dynamic behavior of the specimens reasonably well. At each stage of shaking, severity of damage that results from cracking of the reinforced concrete member was quantified from the updated parameters(i.e. flexural stiffness values).
Kim, H.J.;Yu, E.J.;Kim, H.G.;Chang, K.K.;Lee, S.H.;Cho, S.H.;Chung, L.
Transactions of the Korean Society for Noise and Vibration Engineering
/
v.18
no.7
/
pp.725-731
/
2008
This paper focused on the application of finite element model updating technique to evaluate the structural properties of the reinforced concrete specimen using the data collected from shaking table tests. The specimen was subjected to six El Centre (NS, 1942) ground motion histories with different peak ground acceleration (PGA) ranging from 0.06 g to 0.50 g. For model updating, flexural stiffness values of structural members (walls and slabs) were chosen as the updating parameters so that the converged results have direct physical interpretations. Initial values for finite element model were determined from the member dimensions and material properties. Frequency response functions (i.e. transfer functions), natural frequencies and mode shapes were obtained using the acceleration measurement at each floor and given ground acceleration history. The weighting factors were used to account for the relative confidence in different types of Inputs for updating (j.e. transfer function and natural frequencies) The constraints based on upper/lower bound of parameters and sensitivity-based constraints were implemented to the updating procedure in this study using standard bounded variable least-squares(BVLS) method. The veracity of the updated finite element model was investigated by comparing the predicted and measured responses. The results indicated that the updated model replicates the dynamic behavior of the specimens reasonably well. At each stage of shaking, severity of damage that results from cracking of the reinforced concrete member was quantified from the updated parameters (i.e. flexural stiffness values).
A real-time PCR assay using hybridization probe (HybProbe) has been developed to detect Brucella (B.) melitensis strains. The primer and HybProbe sets were designed based on the gap gene of chromosome I with a specific single nucleotide polymorphism of B. melitensis. Specificity of the assay was confirmed by comparison to reference Brucella species and other related strains. In the melting curve analysis, B. melitensis generated a peak at $67^{\circ}C$ unlike those for other Brucella species observed at $61^{\circ}C$. Sensitivity of the assay for B. melitensis ranged from 20 ng to 200 fg of genomic DNA. The ability to identify 94 Mongolian B. melitensis isolates using the real-time PCR assay was identical to that of classical biotyping methods and differential multiplex PCR. These data showed that this new molecular technique is a simple and quick method for detecting B. melitensis, which will be important for the control and prevention of brucellosis.
Park Chan-Koo;Jo Sung-Ja;Chough Nam-Joon;Kim Min-Young;Sohn Jong-Ryeul;Moon Kyong-Whan
Journal of environmental and Sanitary engineering
/
v.19
no.4
s.54
/
pp.25-33
/
2004
Acrylamide, difficult to analyze by GC and GC/MS due to the polarity and low volatility, was analyzed by LC/ESI/MS in the study. Acrylamide its(molecular weight 71amu) showed m/z=72 $(M+H)^+$ and high peak intensity at 22V in SIR mode. The mass spectrum ratios of acrylamide for qualitative identification had m/z=72 in precursor ion and m/z=55 in products ion, respectively. Those ratios at 30V in SIR mode ranged from 1: 1.4 to 1:1.17 despite various acrylamide concentrations. The ion intensity ratios of acrylamide $(m/z=72,\; [M+H]^+)$ to acrylamide isotopes $(m/z=73,\;[M+H]^+)$ ranged from 100 : 3.57 to 100 : 3.92. The results verified theoretical mass spectrum ratio that was 100:3.82. The linearity of standard calibration curve was y : 520.584x + 1815.26 with $r^2=0.99.$ In quality assurance and quality control, the recovery rate ranged from 81.64 percent to 90.97 percent and relative standard deviation was less than $10\%$ with 5 repeated injections at individual standard calibration solutions. The method was applied to analyze acrylamide in food at grocery stores. Snacks made of potatoes showed the highest acrylamide concentration followed by products made of French fries, wheat, and corn.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.