• 인터넷정보학회논문지
• /
• 제10권2호
• /
• pp.179-186
• /
• 2009

본 논문은 가중 퍼지소속함수 기반 신경망(Neural Network with Weighted Fuzzy Membership Functions, NEWFM)을 이용하여 Creighton University Ventricular Tachyarrhythmia DataBase(CUDB)의 심전도(ECG) 신호로부터 정상리듬(Normal Sinus Rhythm, NSR)과 심실빈맥/심실세동(Ventricular Tachycardia/Ventricular Fibrillation, VT/VF)을 분류하는 방안을 제시하고 있다. NEWFM에서 사용할 특징입력을 추출하기 위해서 첫 번째 단계에서는 웨이블릿 변환(wavelet transform, WT)을 이용하였다. 두 번째 단계에서는 첫 번째 단계에서 생성된 웨이블릿 계수들을 위상공간 재구성(Phase Space Reconstruction, PSR)과 첨단(Peak) 추출 기법의 입력 값으로 이용하여 2개의 특징입력을 추출하였다. NEWFM은 이들 2개의 특징입력을 이용하여 정상리듬과 심실빈맥/심실세동을 분류하였고 그 결과로 90.13%의 분류성능을 나타내었다.

• Journal of information and communication convergence engineering
• /
• 제12권2호
• /
• pp.83-88
• /
• 2014

The simultaneous suppression of sidelobes and the sharpening of the central peak in the process of diffraction pattern detection based on asymmetric apodization have been investigated. Asymmetric apodization is applied to a semicircular array of two-dimensional (2D) aperture functions, which is a series of 'coded-phase arrays of semicircular rings randomly distributed over the central circular region of a pupil function' and is similar to that used in the field of diffractive optics. The point spread function (PSF) of an imaging system with asymmetric apodization of the discrete type has been found to possess a good side with suppressed sidelobes, whereas its bad side contains enhanced sidelobes. Further, the diffracted field characteristics are obtained in the presence of these aperture functions. Asymmetric apodization is helpful in improving the performance of the optical gratings or 2D arrays used in real-time imaging techniques.

• Carbon letters
• /
• 제8권4호
• /
• pp.292-298
• /
• 2007

In order to investigate functional groups on the surface of Multi-walled Carbon Nanotubes (MWCNTs) induced by oxyfluorination, XPS (X-ray photoelectron spectroscopy) analysis was carried out. All core level spectra of MWCNTs were deconvoluted to several Pseudo-Voigt functions (sum of Gaussian-Lorentzian functions). Both O1s and F1s binding energy of oxyfluorinated MWCNTs shifted high value as increment of fluorine mixing ratio. The carbon-fluorine covalent bonding concentration increased as increment of fluorine mixing ratio. The shape and intensity of OF10-MWCNTs are similar with those of as-received MWCNTs. However, the intensity and binding energies of main peak position of OF20-MWCNTs and OF30-MWCNTs were dramatically increased by oxyfluorination.

• 한국환경과학회지
• /
• 제24권4호
• /
• pp.437-447
• /
• 2015

Estimation of runoff peak is needed to assess water availability, in order to support the multifaceted water uses and functions, hence to underscore the modalities for efficient water utilization. The magnitude of storm rainfall acts as a primary input for basin level runoff computation. The rainfall-runoff linkage plays a pivotal role in water resource system management and feasibility level planning for resource distribution. Considering this importance, a case study has been carried out in the Hancheon basin of Jeju Island where distinctive hydrological characteristics are investigated for continuous storm rainfall and high permeable geological features. The study aims to estimate unit hydrograph parameters, peak runoff and peak time of storm rainfalls based on Clark unit hydrograph method. For analyzing observed runoff, five storm rainfall events were selected randomly from recent years' rainfall and HEC-hydrologic modeling system (HMS) model was used for rainfall-runoff data processing. The simulation results showed that the peak runoff varies from 164 to 548 m3/sec and peak time (onset) varies from 8 to 27 hours. A comprehensive relationship between Clark unit hydrograph parameters (time of concentration and storage coefficient) has also been derived in this study. The optimized values of the two parameters were verified by the analysis of variance (ANOVA) and runoff comparison performance were analyzed by root mean square error (RMSE) and Nash-Sutcliffe efficiency (NSE) estimation. After statistical analysis of the Clark parameters significance level was found in 5% and runoff performances were found as 3.97 RMSE and 0.99 NSE, respectively. The calibration and validation results indicated strong coherence of unit hydrograph model responses to the actual situation of historical storm runoff events.

• International Journal of Concrete Structures and Materials
• /
• 제10권2호
• /
• pp.221-236
• /
• 2016

The aim of this paper is to investigate the compressive behavior and characteristics of amorphous metallic fiber-reinforced concrete (AMFRC). Compressive tests were carried out for two primary parameters: fiber volume fractions ($V_f$) of 0, 0.3, 0.6 and 0.8 %; and design compressive strengths of 27, 35, and 50 MPa at the age of 28 days. Test results indicated that the addition of amorphous metallic fibers in concrete mixture enhances the toughness, strain corresponding to peak stress, and Poisson's ratio at high stress level, while the compressive strength at the 28-th day is less affected and the modulus of elasticity is reduced. Based on the experimental results, prediction equations were proposed for the modulus of elasticity and strain at peak stress as functions of fiber volume fraction and concrete compressive strength. In addition, an analytical model representing the entire stress-strain relationship of AMFRC in compression was proposed and validated with test results for each concrete mix. The comparison showed that the proposed modeling approach can properly simulate the entire stress-strain relationship of AMFRC as well as the primary mechanical properties in compression including the modulus of elasticity and strain at peak stress.

• Wind and Structures
• /
• 제8권5호
• /
• pp.357-372
• /
• 2005

Mean and extreme pressure distributions on a large cantilevered flat roof model are measured in a boundary layer wind tunnel. The largest peak suction values are observed from pressure taps beneath conical "delta-wing type" corner vortices that occur for oblique winds, then the characteristics and causes of the local peak suctions are discussed in detail. Power spectra of fluctuating wind pressures measured from some typical taps located at the roof edges under different wind directions are presented, and coherence functions of fluctuating pressures are also obtained. Based on these results, it is verified that the peak suctions are highly correlated with the conical vortices. Furthermore, according to the characteristics of wind loads on the roof, an aerodynamic solution to minimize the peak suctions by venting the leading edges and the corners of the roof is recommended. The experimental results show that the suggested strategy can effectively control the generation of the conical vortices and make a reduction of 50% in mean pressures and 25% in extreme local pressures at wind sensitive locations on the roof.

• 한국통신학회논문지
• /
• 제35권4C호
• /
• pp.401-407
• /
• 2010

본 논문은 OFDM (orthogonal frequency division multiplexing) 시스템에서 PAPR (peak-to-average power ratio) 감소 기법으로 복잡도가 낮은 컴팬딩 (companding) 기법을 고려한다. 기존의 컴팬딩 함수는 시스템 요구 사항에 따라 설계하기 어렵고 비트오류율 성능 열화가 매우 큰 단점이 있다. 이에 본 논문에서는 임의의 최대 PAPR 값을 제공하고 그에 따라 비트오류율 성능이 점진적으로 바뀌는 스케일러블 컴팬딩 함수를 제안한다. 제안하는 컴팬딩 함수는 시스템이 요구하는 PAPR 성능과 비트오류율 성능에 따라 쉽게 설계할 수 있으며, 모의실험 결과 같은 PAPR 조건에서 기존의 클리핑이나 $\mu$-low 기법보다 우수한 비트오류율 성능을 제공함을 볼 수 있다.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.48-52
• /
• 2019

The blue emitting fluorescence of $SrAl_{12}O_{19}:Ce_{0.09}{^{3+}}$, $Eu_{0.01}{^{2+}}$ phosphor includes two kinds of independent energy transfer mechanism through electric multipole interactions between donor and acceptor ions. The first energy transfer takes place between the $Ce^{3+}$ ion and the $Eu^{2+}$ion which strongly depends on the concentration $Eu^{2+}$ions. The second energy transfer occurs between the $Ce^{3+}$ ion and the $O_{Me}-Ce^{3+}$ complexes. Both energy transfer mechanisms of blue emitting peak at 410 nm were investigated by fitting of Gaussian functions. The result shows that the peak at 410 nm is two overlapping emissions originated by $Eu^{2+}$ions and $O_{Me}-Ce^{3+}$ complexes and as time elapses $Eu^{2+}$peak remains whereas $O_{Me}-Ce^{3+}$ related peak disappears.

• Structural Engineering and Mechanics
• /
• 제83권4호
• /
• pp.435-449
• /
• 2022

Constitutive modeling that could reasonably predict and effectively evaluate the post-peak structural behavior while eliminating the mesh-dependency in numerical simulation remains to be developed for general engineering applications. Based on the previous work, a simple one-dimensional modeling procedure is proposed to predict and evaluate the post-peak response, as characterized by the evolution of localized strain field, of a steel member to monotonically uniaxial tension. The proposed model extends the classic one-dimensional softening with localization model as introduced by (Schreyer and Chen 1986) to account for the localization length, and bifurcation and rupture points. The new findings of this research are as follows. Two types of strain-softening functions (bilinear and nonlinear) are proposed for comparison. The new failure criterion corresponding to the constitutive modeling is formulated based on the engineering strain inside the localization zone at rupture. Furthermore, a new mathematical expression is developed, based on the strain rate inside and outside the localization zone, to describe the displacement field at which bifurcation occurs. The model solutions are compared with the experimental data on four low-carbon cylindrical steel bars of different lengths. For engineering applications, the model solutions are also compared to the experimental data of a cylindrical steel bar system (three steel bars arranged in series). It is shown that the bilinear and nonlinear softening models can predict the energy dissipation in the post-peak regime with an average difference of only 4%.

• 천문학회보
• /
• 제46권1호
• /
• pp.47.2-47.2
• /
• 2021

Focusing on both small separations and baryonic acoustic oscillation scales, the cosmic evolution of the clustering properties of peak, void, wall, and filament-type critical points is measured using two-point correlation functions in ΛCDM dark matter simulations as a function of their relative rarity. A qualitative comparison to the corresponding theory for Gaussian random fields allows us to understand the following observed features: (i) the appearance of an exclusion zone at small separation, whose size depends both on rarity and signature (i.e. the number of negative eigenvalues) of the critical points involved; (ii) the amplification of the baryonic acoustic oscillation bump with rarity and its reversal for cross-correlations involving negatively biased critical points; (iii) the orientation-dependent small-separation divergence of the cross-correlations of peaks and filaments (respectively voids and walls) that reflects the relative loci of such points in the filament's (respectively wall's) eigenframe. The (cross-) correlations involving the most non-linear critical points (peaks, voids) display significant variation with redshift, while those involving less non-linear critical points seem mostly insensitive to redshift evolution, which should prove advantageous to model. The ratios of distances to the maxima of the peak-to-wall and peak-to-void over that of the peak-to-filament cross-correlation are ~2-√~2 and ~3-√~3WJ, respectively, which could be interpreted as the cosmic crystal being on average close to a cubic lattice. The insensitivity to redshift evolution suggests that the absolute and relative clustering of critical points could become a topologically robust alternative to standard clustering techniques when analysing upcoming surveys such as Euclid or Large Synoptic Survey Telescope (LSST).