• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.4005-4011
• /
• 2010

본 연구는 도로 다이어트 (차로폭 축소) 기법을 적용해 자전거전용도로를 확보한 부산시 남구 자전거도로 시범사업을 중심으로 자전거도로 설치가 자동차흐름에 미치는 영향을 분석하였다. 분석결과 비첨두시간 동안 자동차의 평균지체시간 및 평균정지횟수는 자전거전용도로 설치 후 다소 증가하였으나 통계적으로 유의한 차이를 나타내지 않은 반면, 첨두시간 동안 자동차의 평균지체시간 및 평균정지횟수는 자전거전용도로 설치 후 유의한 증가를 나타냈다(alpha=0.1). 첨두시간 분석결과는 교통량이 많을 경우 도로 다이어트가 차로혼잡의 가능성을 높일 수 있다는 기존 국외 연구 결과와 일치하며, 비첨두시간 분석결과는 여유용량으로 인해 자동차의 흐름이 도로 다이어트에 의해 큰 영향을 받지 않는 사실을 반영한 결과로 판단된다.

• 한국화재소방학회논문지
• /
• 제19권2호
• /
• pp.75-80
• /
• 2005

적충형 PTC 서미스터의 특성연구를 위해 $(0.90Ba+0.05Sr+0.05Ca)TiO_3+0.01TiO_3+0.01SiO_2+0.0008MnO_2+0.0018Nb_2O_5$와 같은 실험조성식을 설정한 후 표면실장(SMD) 적층형 PTC 시편을 제작하였다. 그 결과 상온 비저항 값을 크게 낮출 수 있고 용도에 따라 전류용량을 크게 할 수 있었으나 적층화로 인해 peak 비저항이 크게 낮아지고 열용량이 커짐으로써 스위칭(switching)시간이 늦어지는 점을 확인하였다. 전압-전류 특성에서는 적층수가 증가할수록 초기 최대전류값이 증가하며 큐리점에 대응하여 저항값이 급격히 커지는 전이전압(전계)도 증가함을 보였다. 그러나 인가전압(전계)을 증가시킬 경우 peak 비저항값을 높일 수 있어 스위칭시간을 줄일 수 있다 이 소자는 화재감지기의 센서로 활용될 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.343-345
• /
• 2013

본 논문에서는 125 MHz 동작 주파수에서 51개 위상의 클록을 출력하는 위상 고정 루프(phase-locked loop: PLL)을 제안한다. 제안된 위상 고정 루프는 125 MHz 주파수의 51-위상 클록을 출력하기 위해서 저항으로 연결된 3개의 전압제어발진기 (voltage controlled oscillator: VCO)를 이용한다. 각 전압제어발진기는 17단의 delay-cell로 구성되며, 3 개의 전압제어발진기를 연결하는 저항을 통해 동일한 위상차를 가지는 51개 위상 클록을 구현한다. 제안된 위상 고정 루프는 1.0 V의 공급전압을 이용하는 65 nm CMOS 공정에서 설계되었으며, 125 MHz 동작 주파수에서 시뮬레이션된 DNL과 peak-to-peak jitter는 각각 +0.0016/-0.0020 LSB와 1.07 ps이다. 제작된 위상 고정 루프의 면적과 전력 소모는 각각 $290{\times}260{\mu}m^2$과 2.5 mW이다.

• 한국통신학회논문지
• /
• 제21권6호
• /
• pp.1480-1489
• /
• 1996

In ATM networks there are two methods in traffic control as schemes advancing the quality of service. One is reactive control after congestion and the other which is generally recommended, is preventive control before congestion, including connection admission control on call leel and usage parameter control, network parameter control, priority control and congestion control on cell level. In particular, usage parameter control is required for restricting the peak cell rate of bursy tracffic to the parameter negotiated at call set-up phase since the peak cell rate significantly influences the network quality of service. The scheme for progressing quality of service by usage parameter control is themethod using VSA(Virtual Scheduling Algorlithm) recommended ITU-T. The method using VSSA(Virtual Scheduling Suggested Algorlithm) in this paper is suggested by considering cell delay variation and token rate of leaky bucket, compared VSA and VSANT(Virtual Scheduling Algolithm with No Tolerance) with VSSA which polices violated cell probability of conformed peak cell rate and intentionally excessive peak cell rate. VSSA method using IPP(Interruped Poisson Process) model of input traffic source showed more quality of service than VSA and VSANT methods as usage parameter control because the suggested method reduced the violated cell probability of contformed peak cell rate and intentionally excessive peak cell rate.

• 한국소음진동공학회논문집
• /
• 제20권6호
• /
• pp.568-576
• /
• 2010

It is widely known that the leak locating of underground plastic pipelines is much more difficult than that of cast iron pipelines. The precision of the leak locating depends upon the speed of leak signal and the time delay estimation between the two sensors on the pipeline. In this paper, six different windowing filters are considered to improve the time delay estimation especially for the plastic pipelines. The time delay is usually estimated from the peak time of cross-correlation functions. The filtering windows including rectangle, Roth, Wiener, SCOT, PHAT and maximum likelihood are applied to derive the generalized cross-correlation function and compared each other. Experimental results for the actual plastic underground water supply pipeline show that the introduction of the filtering windows improved the precision of time delay estimation. Some window functions provide excellent leak locating capability for the plastic pipe of 98 m long, which is less than 1 % of the pipe lengths. Also a new probabilistic approach that the combinations of all results from each filtering window is suggested for the better leak locating.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1376-1379
• /
• 2007

The effects of the MgO fabrication process on the properties of AC-PDPs were examined. MgO films were deposited by e-beam evaporation with various substrate temperatures and oxygen flow rates. MgO films were analyzed by XRD, CL and ellipsometer. Panel properties such as luminance, efficiency, discharge voltage and discharge delay time were measured with test panels. MgO films with higher temperature, smaller oxygen flow rate showed shorter discharge delay time. Also they showed smaller XRD peak intensity. These results revealed that the discharge delay time was strongly influenced by temperature and oxygen flow rate of the MgO fabrication process.

• 전자공학회논문지 IE
• /
• 제46권4호
• /
• pp.78-82
• /
• 2009

본 논문에서는 다중경로 채널 조건과 부반송파 변조방식이 다른 OFDM에 대한 성능을 분석한다. 또한 OFDM 신호에 대한 다중경로 지연 확산 환경, 시작 프레임 동기 오류의 영향에 대해서 분석한다. 다른 변조방식에 대한 BER 성능 분석을 통해서 적응형 OFDM 전송에 적용할 수 있는 기준을 제시한다.

• 전자공학회논문지A
• /
• 제28A권1호
• /
• pp.52-59
• /
• 1991

An effective and accurate delay time model is the key problem in the simulation and timing verification of CMOS logic circuits. We propose a semi-analytic CMOW delay time model taking into account the configuration ratio, the input waveform slope and the load capacitance. This model is based on the Schichman Hodges's DC equations and derived on the optimally weighted switching peak current. The parameters necessary for the model calculation are automatically determined from the program. The proposed model is computationally effective and the error is typically within 10% of the SPICEA results. Compared to the table RC model, the accuracy is inproved over two times in average.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권5호
• /
• pp.303-309
• /
• 2016

This paper presents a channel-adaptive rate control algorithm for low delay video coding. The main goal of the proposed method is to adaptively use the unknown available channel bandwidth while reducing the end-to-end delay between encoder and decoder. The key idea of the proposed algorithm is for the status of the encoder buffer to indirectly reflect the mismatch between the available channel bandwidth and the generated bitrate. Hence, the proposed method fully utilizes the unknown available channel bandwidth by monitoring the encoder buffer status. Simulation results show that although the target bitrate mismatches the available channel bandwidth, the encoder efficiently adapts the given available bandwidth to improve the peak signal-to-noise ratio.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.319-322
• /
• 2002

In this paper, we consider a generalized rule of retransmission request, identified as (Μ, $\sigma$) rule for multicopy transmission ARQ. Following a revised rule to conform with a strict criterion for requesting a retransmission, we can reduce the probability that a packet accepted by the receiving node is still being infected with errors. In turn, such amendment invokes a degradation of delay and throughput performance. For a quantitative evaluation of (Μ, $\sigma$) rule, we develop an analytical method to calculate probability of error remains, maximum throughput, average and peak delays, and delay variation. From the numerical examples made by use of the analytical method, we observe a performance trade-off between probability of error remains and delay/throughput. We also confirm the adaptability of (Μ, $\sigma$) rule to meet various QoS requirements.