• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.4005-4011
• /
• 2010

This study investigates the effect on automobile traffic flow of the bike lane configuration via the road diet implemented in Nam-Gu, Busan using the microscopic simulator TransModeler. The results show that the increases in average delay time and stopped time experienced by automobile vehicles after implementing the road diet during the peak period are significant, but those during the non-peak period are insignificant at alpha=0.1. The results in peak period are consistent with the results of the past studies, which concluded that a road diet can contribute to deteriorating the level of service when the automobile traffic flow rate on the existing roadway is relatively high. For the non-peak period, the analysis results may reflect the fact that the automobile traffic flow is not severly affected by the road diet due to the reserved capacity.

• Fire Science and Engineering
• /
• v.19 no.2 s.58
• /
• pp.75-80
• /
• 2005

This dissertation is about the development of PTC(Positive Temperature Coefficient) thermistor by composition method. A multilayer-type PTC samples were fabricated under optimal conditions after setting the experimental composition equation as $(0.90Ba+0.05Sr+0.05Ca)TiO_3+0.01TiO_3+0.01SiO_2+0.0008MnO_2+0.0018Nb_2O_5$ and their testing results were analyzed. The fabrication method of SMD(Surface Mounted Device) multilayer -type sample based on the composition ratio has the advantages in lowering its resistivity at room temperature, considerably, and increasing maximum current level, as needed. Although there is a disadvantage of peak resistivity drop by the multilayer, causing the increasement of thermal capacity. and thereby, increasing the switching delay time, a high applying voltage can increase the peak resistivity and shorten the switching delay time. The voltage-current characteristic showed that the more multilayers increased the initial maximum current and the transition voltage that increased the resistivity abruptly according to the curie point. The element it could be applied with the sensor for the fire detector.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.343-345
• /
• 2013

This paper describes a phase-locked loop (PLL) that generates a 51-phase clock with the operating frequency of 125MHz. To generate 51-phase clock with a frequency of 125 MHz, the proposed PLL uses three voltage controlled oscillators (VCOs) which are connected by resistors. Each VCO consists of 17 delay-cells. An resistor averaging scheme, which makes three VCOs to connect with each other, makes it possible to generates 51-phase clock of the same phase difference. The proposed PLL is designed by using 65 nm CMOS process with a 1.0 V supply. At the operating frequency of 125 MHz, the simulated DNL and peak-to-peak jitter are +0.0016/-0.0020 LSB and 1.07 ps, respectively. The area and power consumption of the implemented PLL are $290{\times}260{\mu}m^2$ and 2.5 mW, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1480-1489
• /
• 1996

In ATM networks there are two methods in traffic control as schemes advancing the quality of service. One is reactive control after congestion and the other which is generally recommended, is preventive control before congestion, including connection admission control on call leel and usage parameter control, network parameter control, priority control and congestion control on cell level. In particular, usage parameter control is required for restricting the peak cell rate of bursy tracffic to the parameter negotiated at call set-up phase since the peak cell rate significantly influences the network quality of service. The scheme for progressing quality of service by usage parameter control is themethod using VSA(Virtual Scheduling Algorlithm) recommended ITU-T. The method using VSSA(Virtual Scheduling Suggested Algorlithm) in this paper is suggested by considering cell delay variation and token rate of leaky bucket, compared VSA and VSANT(Virtual Scheduling Algolithm with No Tolerance) with VSSA which polices violated cell probability of conformed peak cell rate and intentionally excessive peak cell rate. VSSA method using IPP(Interruped Poisson Process) model of input traffic source showed more quality of service than VSA and VSANT methods as usage parameter control because the suggested method reduced the violated cell probability of contformed peak cell rate and intentionally excessive peak cell rate.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.6
• /
• pp.568-576
• /
• 2010

It is widely known that the leak locating of underground plastic pipelines is much more difficult than that of cast iron pipelines. The precision of the leak locating depends upon the speed of leak signal and the time delay estimation between the two sensors on the pipeline. In this paper, six different windowing filters are considered to improve the time delay estimation especially for the plastic pipelines. The time delay is usually estimated from the peak time of cross-correlation functions. The filtering windows including rectangle, Roth, Wiener, SCOT, PHAT and maximum likelihood are applied to derive the generalized cross-correlation function and compared each other. Experimental results for the actual plastic underground water supply pipeline show that the introduction of the filtering windows improved the precision of time delay estimation. Some window functions provide excellent leak locating capability for the plastic pipe of 98 m long, which is less than 1 % of the pipe lengths. Also a new probabilistic approach that the combinations of all results from each filtering window is suggested for the better leak locating.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1376-1379
• /
• 2007

The effects of the MgO fabrication process on the properties of AC-PDPs were examined. MgO films were deposited by e-beam evaporation with various substrate temperatures and oxygen flow rates. MgO films were analyzed by XRD, CL and ellipsometer. Panel properties such as luminance, efficiency, discharge voltage and discharge delay time were measured with test panels. MgO films with higher temperature, smaller oxygen flow rate showed shorter discharge delay time. Also they showed smaller XRD peak intensity. These results revealed that the discharge delay time was strongly influenced by temperature and oxygen flow rate of the MgO fabrication process.

• 전자공학회논문지 IE
• /
• v.46 no.4
• /
• pp.78-82
• /
• 2009

We analyze an analysis of the performance of OFDM(Orthogonal Frequency Division Multiplexing) under multipath channel conditions, and to allow for different OFDM configurations. In this paper, the effects on multipath delay spread, peak power dipping, channel noise and time synchronization errors for the OFDM Signals are analyzed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.1
• /
• pp.52-59
• /
• 1991

An effective and accurate delay time model is the key problem in the simulation and timing verification of CMOS logic circuits. We propose a semi-analytic CMOW delay time model taking into account the configuration ratio, the input waveform slope and the load capacitance. This model is based on the Schichman Hodges's DC equations and derived on the optimally weighted switching peak current. The parameters necessary for the model calculation are automatically determined from the program. The proposed model is computationally effective and the error is typically within 10% of the SPICEA results. Compared to the table RC model, the accuracy is inproved over two times in average.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.303-309
• /
• 2016

This paper presents a channel-adaptive rate control algorithm for low delay video coding. The main goal of the proposed method is to adaptively use the unknown available channel bandwidth while reducing the end-to-end delay between encoder and decoder. The key idea of the proposed algorithm is for the status of the encoder buffer to indirectly reflect the mismatch between the available channel bandwidth and the generated bitrate. Hence, the proposed method fully utilizes the unknown available channel bandwidth by monitoring the encoder buffer status. Simulation results show that although the target bitrate mismatches the available channel bandwidth, the encoder efficiently adapts the given available bandwidth to improve the peak signal-to-noise ratio.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.319-322
• /
• 2002

In this paper, we consider a generalized rule of retransmission request, identified as (Μ, $\sigma$) rule for multicopy transmission ARQ. Following a revised rule to conform with a strict criterion for requesting a retransmission, we can reduce the probability that a packet accepted by the receiving node is still being infected with errors. In turn, such amendment invokes a degradation of delay and throughput performance. For a quantitative evaluation of (Μ, $\sigma$) rule, we develop an analytical method to calculate probability of error remains, maximum throughput, average and peak delays, and delay variation. From the numerical examples made by use of the analytical method, we observe a performance trade-off between probability of error remains and delay/throughput. We also confirm the adaptability of (Μ, $\sigma$) rule to meet various QoS requirements.