• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.93-97
• /
• 2001

We introduce the structure and the capability of a UHV x-ray scattering system constructed for surface structural studies. The system consists of vacuum parts required for surface preparation and a vertical-horizontal diffractometer using the S2D2 geometry. To illustrate the capability of the system, we measured the 7$\times$7 reconstruction peak of a Si (111) surface. The peak count rate was 216 counts/sec and the domain size of the 7$\times$7 reconstruction was larger than 1600 $\AA$. This demonstrates that the system is capable of providing surface structural information.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.4
• /
• pp.480-485
• /
• 2004

Fatty acid methyl ester (FAME) technology was evaluated as a monitoring tool for quantification of Nocardia amarae causing a nuisance foaming problem in activated sludge process. The identified signature peak was 19:1 alcohol as a reliable unique peak to N. amarae. Chemostat study revealed that the distribution and quantity of fatty acid peaks were dependent on the growth stage of Nocardia. The FAME results were similar for two relatively high dilution rates; however, the amounts of signature peaks extracted from the 4 and 6 day cultures were significantly higher. This dependence of signature peaks on the physiological state of the organism may be a useful information to assess the health of microbial populations in activated sludge. A laboratory scale batch foaming potential experiment provided a critical foaming level depending on Nocardia population. This critical Nocardia level determined in this study was in terms of either the threshold filament intersections number or the threshold signature FAME amount. The threshold peak area of signature FAME (19:1 alcohol) and corresponding filament counts were 430PA/mg VSS and $1.45{\times}10^6$ intersections/g VSS, respectively. The threshold signature FAME level could be effectively applied as a criterion for diagnosing foam occurrence in activated sludge system.

• Journal of Ecology and Environment
• /
• v.34 no.4
• /
• pp.371-379
• /
• 2011

To determine the peak dispersal times of allergenic pollen grains in Ulsan, Korea, we performed continuous airborne pollen counts at three stations (Sts. A, B, and C) in Ulsan from August 2009 to November 2010. Pollen grains were sampled using a Durham sampler. Two peak pollen dispersal seasons were observed per year. The peak seasons generally coincided with the flowering period of anemophilous trees: Taxodiaceae (February), Alnus (March), Cupressaceae (April), Quercus, and Pinus (May), and with the flowering phase of herbs from August to November, e.g., Humulus, Artemisia, Gramineae, and Ambrosia from August through September. The highest concentration of airborne pollen was from Pinus (68%), followed by Quercus (15%), Alnus (6%), and Humulus (2%); whereas very low pollen concentrations were from Taxodiaceae, Cupressaceae, Artemisia, Gramineae, and Ambrosia (${\leq}$ 1% of the annual total airborne pollen concentration). Our findings indicate that Alnus and Humulus pollen are major allergens whereas those of Pinus and Quercus are minor allergens. The concentration of Alnus pollen grains at St. C was over five times that at Sts. A and B. This finding implies that individuals living at or near St. C are exposed to high concentrations of Alnus pollen before and after March, which is the flowering period of the alder tree. From August to September, individuals living at or near St. B are exposed to high concentrations of Humulus pollen. Our study suggests that Alnus pollen may be the major aeroallergen causing pollinosis in the spring at St. C and Humulus pollen may be the major aeroallergen in autumn at St. B.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.6
• /
• pp.93-97
• /
• 2000

This paper established the demand factor of elevator. For this purpose, it was analysed the operating pattern of elevator into power supply facility installed in the apartment. As a result, it is found that the simultaneous driving-rate of elevator peaked at September in a year and the average operation of 1 day recorded the 800 counts. Also, the peak-value of simultaneous driving-rate investigated about 40∼45%. Therefore, it was analysed that the demand factor of elevator are smaller than 10% by standard data.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.4
• /
• pp.215-223
• /
• 2018

Recently, as interest of wearable devices has increased, commercially available smart wristbands and applications have been used as a tool for personal healthy management. However most previous studies have focused on evaluating the accuracy and reliability of the technical problems of wearable devices, especially step counts, walking distance, and energy consumption measured from the smart wristbands. In this study, we propose a physical activity evaluation model using classification rules, induced from the associative classification mining approach. These rules associated with five physical activities were generated by considering activities and walking times in target heart rate zones such as 'Out-of Zone', 'Fat Burn Zone', 'Cardio Zone', and 'Peak Zone'. In the experiment, we evaluated the prediction power of classification rules and verified its effectiveness by comparing classification accuracies between the proposed model and support vector machine.

• Korean Journal of Optics and Photonics
• /
• v.2 no.2
• /
• pp.96-102
• /
• 1991

Monitoring the surface profile real time on the manufacturing line of planar products has been accomplished by employing the scattering of a laser light. The laser beam was focused onto the surface and the direction of the reflected beam was utilized to obtain the slope of the surface facet. By taking data fast enough, it was possible to obtain the microscopic surface structure. The mean roughness thus obtained agreed well with the ones found with the mechanical stylus instrument. There was discrepancy between the two results as to the number of peaks per com. A simple model based on the deconvolution of the raw data was found adequate to improve the agreement to an acceptable level.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.7
• /
• pp.706-710
• /
• 1997

Isotope ratios of K, Ca, Cr and Fe are measured at cool plasma condition generated using high carrier flow rate and relatively low RF power of 900 W. Background molecular ions are suppressed to below 100 counts which give isobaric interference to the analytes. The background ions show different attenuation characteristics at increased carrier flow rate and hence for each element different carrier flow rate should be used to measure isotope ratios without isobaric interference. Isotope ratios are measured at both scan and peak-hopping modes and compared with certified or accepted ratios. The measured isotope ratios show some mass discrimination against low mass due to low ion energy induced from a copper shield to eliminate capacitive coupling of plasma with load coil.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.161-171
• /
• 2014

When the Hough transform is applied to identify an instance of a given model, the output is typically a histogram of votes cast by a set of image features into a parameter space. The next step is to threshold the histogram of counts to hypothesize a given match. The question is "What is a reasonable choice of the threshold?" In a standard implementation of the Hough transform, the threshold is selected heuristically, e.g., some fraction of the highest cell count. Setting the threshold too low can give rise to a false alarm of a given shape(Type I error). On the other hand, setting the threshold too high can result in mis-detection of a given shape(Type II error). In this paper, we derive two conditional probability functions of cell counts in the accumulator array of the generalized Hough transform(GHough), that can be used to select a scientific threshold at the peak detection stage of the Ghough.

• Journal of Sensor Science and Technology
• /
• v.3 no.2
• /
• pp.11-15
• /
• 1994

The TSEE characteristics of LiF(Mg,Cu,Na,Si)phosphor for gamma and beta rays are described. The TSEE glow curve of this phosphor showed 5 peaks in the range from $20^{\circ}C$ to $400^{\circ}C$ and its main peak appeared at $240^{\circ}C$. The sensitivity of the phospor for $^{60}Co$ gamma rays was about 450counts/mR. TSEE energy dependence for various beta radiation was nearly constant (${\pm}10%$) in the mean beta particle energy range from 0.02MeV to 0.8MeV. The efficiency of TSEE of the phosphor for beta radiation was $(2{\sim}15){\times}10^{-3}$.

• Korean Journal of Veterinary Research
• /
• v.33 no.2
• /
• pp.327-336
• /
• 1993

Present experiments were undertaken in order to clarify the effect of splenectomy on the hematology and marrow megakaryocyte picture and to know the genesis of postsplenectomy thrombocytosis in dogs. Six mongrel dogs weighing 8.5~18㎏ were used, of which three were splenectomized and the other three were laparotomized for comparison. Erythrocyte count, total and differential leukocyte counts, thrombocyte count and packed cell volume measurement were made using the blood samples. In addition, bone marrow samples obtained from the femur at 7th and 23rd day of the operation were examined for the number per low-power field, the diameter, and the distribution frequency of the megakaryocyte. From these experiments, following results were obtained : Erythrocyte count and packed cell volume showed significant decrease beginning on the 15th day of splenectomy. Total and differential leukocyte counts showed marked increase for the first 2 days of postsplenectomy. The thrombocyte count of splenectomized dogs increased from the 2nd day of the operation, reached to the peak count on the 15th day, and returned to the preoperation count by the 28th day. The megakaryocyte count per low-power field of the biopsied preparation increased in according to the increase in thrombocyte count. The megakaryocyte diameter of splenectomized dog showed no increase on the 7th or 23rd day of the operation. However, the distribution frequency of the larger megakaryocyte was higher in the splenectomized dogs than in the laparotomized dogs. The total plasma protein concentration showed no significant change after splenectomy or laparotomy. From these results, it may be concluded that the postsplenectomy thrombocytosis results from the increased megakaryocytopoesis or the activated thrombocytopoesis of the marrow megakaryocytes.