• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.305-312
• /
• 2023

Purpose: Although the damage caused by abnormal temperatures is extensive, blow-up or black ice is typical in concrete structures. In this study, PCM with high phase change energy was mixed with concrete to reduce temperature damage to concrete pavement. Method: In order to reduce temperature damage to low temperatures and high temperatures, capsule-type PCM with phase change temperatures of 4.5℃ and 44℃ was replaced by 10%, 30%, and 50%, and thermal performance experiments and compressive strength experiments were conducted using thermocouples and variable chambers. Result: As a result of the thermal performance experiment, it was found that the incorporation of PCM improves temperature resistance by up to 25% or more, and increases thermal resistance at all temperatures with high specific heat when substituted in large amounts. As a result of the compression strength experiment, a substitution of 30% or more resulted in a decrease in the compression strength, and a large strength difference was shown based on the phase change temperature of the PCM. Conclusion: The incorporation of PCMs has been shown to increase the thermal performance of concrete, with the greatest increase in thermal performance near the phase change temperature of PCM. In addition, a small strength reduction of 10% to 20% occurs at the highest substitution rate of 50% substitution, so there is no significant problem with usability, and additional PCM substitution is expected to improve thermal performance.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.272-273
• /
• 2014

Existing the free-form concrete segments (FCS) mold is produced by state of solid such as steel, wood, Styrofoam that can not be recycled. Using FCS mold result in delay on schedule and decrease of productivity because it consists of irregular curved variety and it requires more time than fixed mold. Thus, FCS mold should be developed which can reduce the costs and also it can be used as semipermanent. The aim of this study is to suggest of flexible mold production process for using the phase change materials(PCM). PCM is maintain that its solid state at low temperature but it changes phase to liquid state by heating. PCM is suitable material for flexible mold due to change of phase in relatively high temperature compare to other phase change materials such as water. Flexible mold is possible that reuse semi-permanently made by PCM. Thus, this study is proposed the process of flexible mold production for using the PCM. The study results will be used as the basic theory for studies on production and installation of FCS.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.1
• /
• pp.26-31
• /
• 2014

This study looks into changing building energy use by application of phase change material (PCM). PCM does not need extra energy for operation and is used for reducing building energy use and, CO2 output by displaying semi-permanent effects after installation. It also is able to avoid the maximum electric power time-zone by inducing a time lag phenomenon of cooling and heating loads with high thermal capacity using latent heat. To verify the efficiency of blinds and PCM, tests about the PCM operation mechanism using air conditioning machinery and nocturnal panel cooling were done. In the test results of the case using PCM installation, a $45^{\circ}$ blind angle with machinery air conditioning and nocturnal panel cooling at the same time shows a 22 percent energy saving effect against general space. The test results of each case were compared and analyzed based on the blind and window opening settings. Finally, the energy reduction of existing buildings using PCM application was reviewed based on the final measurement results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.11
• /
• pp.624-630
• /
• 2013

A truck refrigeration system using phase change material (PCM) is expected to have a lower noise level, reduced energy cost, and much lower local greenhouse gas emission. Recently, a forced convection type PCM refrigeration module has been developed. As the operation time increases, the PCM around the air inlet melts, because of a large temperature difference between the PCM and air. Therefore, the latent heat transfer area decreases and the heat transfer rate of the module decreases even though there is a lot of PCM which does not melt around the air outlet. A computational fluid dynamic modeling of the PCM refrigeration module was developed and validated by the experiment. Using the CFD, the design parameters, such as the mass flow rate of the air and roughness of the slab, were investigated to improve the heat transfer inhomogeneity. As a result, the adoption of partial roughness on the slabs improved the heat transfer inhomogeneity and reduced a fan power.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.1
• /
• pp.1-11
• /
• 1983

The object of this paper is to investigate a PCM telemetry system which is designed and constructed in individual modules for an airborne remote measurement system for the first time in Korea. The time division multiplexing PCM encoder has maximum allowable input channels 64 words/frame, 140kbits/sec bit rate. 200frames/sec and 10 bits/wod resolution. And the transmitting unit is designed for 2.2-2.3GHz(s-band) telemetry frequency band, PCM/FM modulation. The Study of airborne PCM telemtry system contribute to develop a device which can acquire various technical data of newly developing flying vehicles by remote measurement. The performance of the proposed system has been verified through a seguence of tests.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.782-785
• /
• 2010

본 논문은 연속된 음성 신호를 전송로 상에 전송하기 위해 음성 신호를 G.711 표준 권고인 PCM으로 다중화한 후 고정 타임슬롯을 배정하여 전송하는 시스템에서 PCM 화된 디지털 음성 데이터를 실시간으로 암호화하여 전송하는 스트림 암호화 기법에 관한 것이다. 실시간으로 처리되는 음성 데이터의 암호화 시에는 하드웨어 방식이 적합한 데, 본 논문에서는 고정 타임슬롯을 배정받는 음성 데이터의 실시간 암호화 기법에 관한 것이다. 일반적으로 아날로그 음성 신호 코딩 시에 국내에서는 북미 방식인 ${\mu}-law$ 코딩 기법을 적용하는 데 이는 표본화한 음성 데이터를 양자화전에 압축하고 복호화 후 신장하는 비선형 양자화 기법을 적용하는 것으로 표본화된 값을 8 비트의 PCM 데이터로 변화하여 E1(2.048Mbps) 급 속도로 전송한다. 본 논문에서는 PCM 전송로 상에 전송되기 전의 직렬 입력 데이터를 암호화 장치를 거쳐 해당 타임슬롯에 해당하는 8 비트의 데이터를 실시간으로 암호화하여 전송로 상으로 전송하고 역으로 수신 단에서는 PCM 전송로를 거친 직렬 입력 데이터를 암호화된 타임슬롯을 판별하여 해당 타임슬롯의 데이터를 복호화하여 원래 데이터를 복원한다. 본 논문에서는 고정 타임슬롯을 배정받은 PCM 데이터를 암호화하여 전송한 후 수신 단에서 복호화 과정을 거친 후 타임슬롯 단위로 데이터 암호화/복호화가 가능함을 보여준다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.2
• /
• pp.171-178
• /
• 2023

PCM data is result of air-vehicle flight test, this data is distributed for each engineers to analyze its condition. Since line-of-sight between the air-vehicle and the ground receiver cannot always be secured, remote PCM data recording system was claimed to be required. In this paper multi-function PCM data recorder has been described. This PCM data recorder was intended to place on inside of flight object. It can record about two hours in 32 GB SD card with maximum 7 Mbps data rate. RS-422/485 and RJ-45 interface enhanced accessibility for users. 5 V and 1 A power consumption and 19.5 mm × 152.5 mm × 102.3 mm allow to connect with mobile PCM devices. It acquired more than 190-minutes data in 12-times flight test. Also, it achieved military standard environmental test MIL-STD-810G to prove its stability and solidness.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.452-459
• /
• 2019

In this paper, we describe a PCM encoder structure that can update the telemetry system parameters in real time. In the PCM encoder, an analog signal control unit for FPGA, flash memory, and sensor data acquisition was constructed. UART communication, analog signal control, flash memory control, and frame generation are possible through logic inside FPGA of PCM encoder. UART communication allows the PC to transmit parameter data to the PCM encoder, and flash memory is controlled to update the parameter of the telemetry system in real time and finally the frame is formed. Simulation and verification were performed to confirm whether the parameter data is updated in real time, and the proposed structure was used to construct a telemetry system with enhanced flexibility and convenience.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.787-792
• /
• 2022

In winter, the excessive use of deicing salt deteriorates concrete pavement durability. To reduce the amount of deicing salt used, phase-change materials (PCMs) potentially offer an alternative way to melt snow through their latent heat storage characteristics. In this research, thermal energy storage concrete was developed by using PCM-impregnated expanded clay as 50 % replacement to normal aggregate by volume. In addition, to improve the thermal efficiency of PCM lightweight aggregate (PCM-LWA)-incorporated concrete, multi-walled carbon nanotubes (MWCNTs) were incorporated in proportions of 0.10 %, 0.15 %, and 0.20 % by binder weight. Compressive strength testing and programmed thermal cycling were performed to evaluate the mechanical and thermal responses of the PCM-LWA concrete. Results showed a significant strength reduction of 54 % due to the PCM-LWA; however, the thermal performance of the PCM-LWA concrete was greatly improved with the addition of MWCNTs. Thermal test results showed that 0.10 % MWCNT-incorporated concrete had high thermal fatigue resistance as well as uniform heat flow, whereas specimens with 0.15 % and 0.20 % MWCNT content had a reduced thermal response due to supercooling when the ambient temperature was varied between -5℃ and 10℃.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06a
• /
• pp.322-324
• /
• 2012

PCM은 바이트 단위 읽고 쓰기가 가능한 비휘발성 메모리로서 차세대 스토리지로 주목받고 있다. 기존의 디스크 캐싱 기법은 하드 디스크나 SSD와 같이 섹터 단위로 엑세스하는 장치를 위하여 페이지 단위의 캐싱을 하고 있다. 하지만, 바이트 단위 접근이 가능한 고성능 PCM의 특성을 활용하기 위해서는 PCM 스토리지를 위한 효율적인 단위의 디스크 캐싱 기법이 필요하다. 본 논문에서는 페이지 단위가 아닌 128바이트 단위 I/O요청을 위한 캐싱 방법을 제안하며, 이를 기반으로 몇 가지 워크로드에 대하여 실험을 진행하여 I/O 요청의 크기와 개수 변화를 추정한다. 실험 결과를 바탕으로 제안한 기법이 PCM 스토리지에서 더 적합함을 보인다.