• Journal of information and communication convergence engineering
• /
• 제14권3호
• /
• pp.184-190
• /
• 2016

We present experimental demonstrations of electromagnetic bandgap (EBG) structures for the wideband suppression of radiated emissions from a power bus in high-speed printed circuit boards (PCBs). In most of the PCB designs, a parallel plate waveguide (PPW) structure is employed for a power bus. This structure significantly produces the wideband-radiated emissions resulting from parallel plate modes. To suppress the parallel plate modes in the wideband frequency range, the power buses based on the electromagnetic bandgap structure with a defected ground structure (DGS) are presented. DGSs are applied to a metal plane that is connected to a rectangular EBG patch by using a via structure. The use of the DGS increases the characteristic impedance value of a unit cell, thereby substantially improving the suppression bandwidth of the radiated emissions. It is experimentally demonstrated that the DGS-EBG structure significantly mitigates the radiated emissions over the frequency range of 0.5 GHz to 2 GHz as compared to the PPW.

• 환경위생공학
• /
• 제22권2호
• /
• pp.61-73
• /
• 2007

PCBs의 대기 중 농도는 고용량 PUF sampler를 이용하여 2000년부터 2002년까지 주 1회 수도권 인근지역인 경기도 안성에서 측정하였다. 본 논문은 비선형 회귀모델을 이용하여 대기 중 가스상 PCBs의 연간, 월간 사이클을 평가 하고자 한다. Clausius-Clepeyron 식을 이용한 가스상 PCBs의 기울기는 고분자로 갈수록 증가하는 경향이었다. 이는 고분자 PCBs는 저분자 PCBs에 비해 온도 의존성이 크다는 것을 의미한다. 다시 말해, 고분자 PCBs는 다른 지역에서 장거리 이송되어 오는 오염물질의 영향 보다는 지역적인 오염원(예, 토양, 수계 등)에 의해 영향을 크게 받고 있다는 것을 시사한다. Lorentzian 모델을 이용한 총 PCBs의 일별, 월별 회귀식의 결정계수($R^2$)는 각각 0.62(p<0.0001), 0.88(p<0.0001)로 나타나 유의한 결과를 보였다. 또한, 비선형 회귀식 모델을 활용하여 구한 가스상 PCBs의 일별, 월별 싸이클을 모사한 방정식도 매우 유의한 결과(p<0.0001)를 나타내었다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2009년도 춘계학술발표회
• /
• pp.129-129
• /
• 2009

• 한국환경독성학회:학술대회논문집
• /
• 한국환경독성학회 2001년도 춘계심포지움 및 학술발표회
• /
• pp.137-137
• /
• 2001

It is it well known fact that the most relevant toxic emissions such as polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), dioxin-1ike polychlorinated biphenyls (PCBs) are produced from incinerators. Induction of cytochrome P450IA1 catalyzed 7-ethoxyresorufin 0-deethylase (EROD) activity in mammalian cell culture (EROD-microbioassay) is a selective and sensitive parameter used for the quantification of dioxin-like compounds. (omitted)

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.323-325
• /
• 1997

Conventionally it is asummed that the microstrip line conductor has a rectangular cross-section. but the additive and substactive processes used to create conductors for PCBs produce a conductor of approximately Trapezoidal cross-section. For wide Strip line, the thickness and edge effect will be small since most of capacitance is parallel plate rather than fringing and we can ignore the cross-section. For narrow strip lines, the edge effect become immportant. So in this paper, we measure the chracteristic impedance of microstripline by Vector Analyzer and simulate the electromagnetic field of microstripline using finite element method with edge angle.

• 설비공학논문집
• /
• 제8권2호
• /
• pp.230-239
• /
• 1996

A multi-faceted experimental investigation has been carried out to study the cooling performance for stacked modules in arrays of heat generating rectangular modules deployed along PCB's in the enclosed cabinet. The main parameters which have an important effect on cooling characteristics are flow velocity, channel spacing, installation of fan unit, attachment of heat sink, and acoustic noise. The results of individual effect are very helpful for the electronic packaging designer. In order to improve the cooling performance, it is certain that the enlargement of channel space is obviously effective, while this id disadvantageous in high density electronic packaging. Each of the paameters is quantitatively examined as cooling performance and the correlation of Reynolds number to Nusselt number is compared with previous study.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.264-267
• /
• 1996

This paper is aimed to develop a very reliable method for automatic inspection of the solder joints on PCBS. There have been lots of previous works using vision technologies, but they can not be used for inspecting BGA, FCA or other newly used devices. Thus we adopt X-ray technologies for solder joint inspection. We put our attention on reconstructing the 3D shapes of solder joints since it gives us the most detailed information on quality of solder joints. Laminography principle is used to reject the interferences from neighboring parts or leads. To verify the effectiveness of laminography, a simulation study is performed in the case of a solder joints on double sided PCB using.

• 제어로봇시스템학회논문지
• /
• 제5권8호
• /
• pp.995-1000
• /
• 1999

This paper presents a optic system and a visual inspection algorithm looking for solder joint defects of J-lead chip which are more integrate and smaller than ones with Gull-wing on PCBs(Printed Circuit Boards). The visual inspection system is composed of three sections : host PC, imaging and driving parts. The host PC part controls the inspection devices and executes the inspection algorithm. The imaging part acquires and processes image data. And the driving part controls XY-table for automatic inspection. In this paper, the most important five features are extracted from input images to categorize four classes of solder joint defects in the case of J-lead chip and utilized to a back-propagation network for classification. Consequently, good accuracy of classification performance and effectiveness of chosen five features are examined by experiment using proposed inspection algorithm.

• 한국군사과학기술학회지
• /
• 제3권1호
• /
• pp.155-163
• /
• 2000

A general characterization procedure based on the extraction of a 2n-port admittance matrix corresponding to n uniform coupled lines on the multi-layered substrate using the Finite-Difference Time-Domain (FDTD) technique is presented. The frequency-dependent normal mode parameters are obtained from the 2n-port admittance matrix, which in turn provides the frequency-dependent distributed inductance and capacitance matrices. To illustrate the technique, several practical coupled line structures on multi-layered substrate, including a three-line structure, have been simulated. It is shown that the FDTD based time domain characterization procedure is an excellent broadband simulation tool for the design of multiconductor coupled lines on multilayered PCBs as well as thick or thin hybrid structures.

• Toxicological Research
• /
• 제21권4호
• /
• pp.333-338
• /
• 2005

Many of thyroid hormones disrupting chemicals induce effects via interaction with thyroid hormone and retinoic acid receptors and responsive elements intrinsic in target cells. We studied thyroid hormones disrupting effects of food additives and contaminants including BHA, BHT, ethoxyquin, propionic acid, sorbic acid, benzoic acid, CPM, aflatoxin B1, cadmium chloride, genistein, TCDD, PCBs and TDBE in recombinant HeLa cells containing plasmid construct for thyroxin responsive elements. The limit of response of the recombinant cells to T3 and T4 was $1\times10^{-12}\;M$. BHA. genistein, cadmium and TBDE were interacted with thyroid receptors with dose-responsive pattern. In addition, BHA, BHT, ethoxyquin, propionic acid, benzoic acid, sorbic acid, and TBDE showed synergism while cadmium chloride antagonism for T3-induced activity. This study elucidates that recombinant HeLa cell is sensitive and high-throughput system for the detection of chemicals that induce thyroid hormonal disruption via thyroid hormone receptors and responsive elements. Also this study raised suspect of BHA. BHT, ethoxyquin, propionic acid, benzoic acid, sorbic acid, TBDE, genisteine and cadmium chloride as thyroid hormonal system disruptors.