• International Journal of Control, Automation, and Systems
• /
• 제5권3호
• /
• pp.223-233
• /
• 2007

Crane payloads frequently swing with large amplitude motion that degrades safety and throughput. Open-loop methods have addressed this problem, but are not effective for disturbances. Closed-loop methods have also been used, but generally require the speed of the driving motors to be precisely controlled. This paper develops a feedback control method for controlling motors to cancel the measured payload oscillations by intelligently timing the ensuing on and off motor commands. The effectiveness of the oscillation suppression scheme is experimentally verified on an industrial bridge crane.

• 대한전자공학회논문지
• /
• 제26권4호
• /
• pp.45-52
• /
• 1989

로보트는 일반적으로 성능에 비해 링크 및 구동기가 심히 과도설계(overdesign) 되어 있다. 로보트의 링크를 평형화(balancing) 시키면 역학이 간단해 질 뿐 아니라 지배적으로 큰 중력항을 제거시킬 수 있다는 점이 최근에 보여졌다. 본 연구에서는 평형화에 의한 중력항의 제거가 과도설계를 피하는 한 방법으로 보고 페이드로에 따라 변하는 평형조건을 적극적으로 만족시켜주는 자동평형장치(auto-balancing mechanism)을 제안하고 그 성능을 컴퓨터 시뮬레이션으로 예시하였다.

• 항공우주기술
• /
• 제1권1호
• /
• pp.128-134
• /
• 2002

고속비행 중의 공력가열과 같은 외부 열전달로부터 외피 구조물과 내부 탑재물을 보호하기 위하여, KSR-III의 외피에 단열처리가 필요하였다. 일련의 시험과 분석을 통하여 선정된 단열재인 BMS 10-102는 스프레이 가공 형식의 점착성 물질로서 외피에 도포 후 경화시키며, 낮은 열전달율과 낮은 밀도와 같은 특성을 지녀 우수한 단열효과를 기대할 수 있다. 본 연구에서는 KSR-III 기본형 설계에서 대표적인 다층구조인 노즈 페어링부의 honeycomb 샌드위치 구조에 대한 단열해석을 수행하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2002년도 춘계학술발표논문집 (하)
• /
• pp.1289-1292
• /
• 2002

The number of connected computers in the Internet, which has reached a state in which its address space is becoming insufficient is exponentially increased. Also nowadays modern Laptops and Mobile terminal are being used more and more. As hewn, the number of available IPv4 address is limited and many organizations have limited budget to use the global address. So the way to overcome such problems is using private addresses in their networks. In addition, the use of private address makes the system more secure. Moreover, we have considered about supporting of the scalability of data forwarding processes of nodes in their network especially Mobile IP data communication. Thus, we propose the integration of MPLS and Mobile IP network. Also we propose the security services of a constrained LSP for the MPLS payloads.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.243-248
• /
• 2002

The International Space Station (ISS) offers research opportunities for researchers in the field of remote sensing to conduct world-class activities in Low Earth Orbit. ISS provides the facilities to place and operate research experiments in a variety of fields, providing investigators opportunities to perform research and Earth observation. This paper is intended to give the reader an introduction to the ISS utilization and the capabilities for remote sensing research that are being implemented through the development of research facilities. We hope that reader will consider what kind of payloads could be developed to take advantage of facilities, and will consider proposing remote sensing research on the ISS.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.280-282
• /
• 2003

The downlink data rates of the space-born payloads such as high-resolution optical cameras, synthetic aperture radars (SAR) and hyper-spectral sensors are being rapidly increased. For example, the image transmission rates of KOMPSAT-2 MSC(Multi-Spectral Camera) is 320Mbps even if on-board image compression scheme is used.[1] In the near future, the data rates are expected to be a level 500${\sim}$600Mbps because the required resolution will be higher and the swath width will be increased. This paper describes many techniques they enable 500Mbps data receiving and archiving system.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.811-813
• /
• 2003

The Satellite Technology Research Centre (SaTReC), Korea Advanced Institute of Science and Technology (KAIST) has developed and is to launch STSAT-1 (Science and Technology Satellite - 1) on 27$^{th}$ September 2003. The data collection system (DCS) is the one of its payloads. The DCS is a data relay system used for transmission from ground-based sensors through satellite to receiving station. This is one of the important methods collecting global data from the remote locations. In this paper, the DCS on the STSAT-1 will be introduced and the development of the mobile terminal (MT) will be reported.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.36-37
• /
• 2000

정밀 지상관측 위성인 다목적실용위성 1호기에는 해상도 6.6 m인 전자광학카메라(EOC)가 탑재되어 현재 우수한 영상을 보내오고 있으며 2003년 발사예정인 2호기를 위하여 해상도 1 m의 Multispectral Camera(MSC)가 개발중이다. 미 TRW 사가 제작한 EOC 개발에 항우연의 연구진은 그 설계 및 시험의 각 단계별 검토와, 탑재, 위성전체 시험과 보정을 포함한 궤도운용 등의 수행과 함께, 개발기간 동안 현지에서 수행된 별도의 현장교육을 통하여 동급의 위성카메라를 실제 개발할 수 있는 설계기술을 이전받았다. 수차례 대구경 비구면 광학계 제작 경험을 더한 항우연은 MSC 공동개발선인 이스라엘 ELOP 사와 현재 그 설계를 진행하고 있다. (중략)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.581-586
• /
• 2000

Explosively activated pyro-technic device is used to release exhausted rocket booster or payloads at prescribed times in the rocket's flight. It creates pyro-shock environment that rocket or payload components must survive. With the shock spectra acquired from flight data, laboratory test should be performed before flight to check whether all of component can sustain the shock environment. The pyro-shock environment simulation was created by the resonance fixture response to a projectile impact. Desired shock spectra is realized by adjusting the natural frequency of resonance plate and the velocity of impact hammer. This paper describes the development process of Pyro-shock testing machine, which is designed and tested by Korean engineers, to verify components of Korean Sounding Rocket(KSR-3) and the other Korean space vehicle. Both analytical and experimental techniques are introduced in this paper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.165-169
• /
• 2000

High level vibrationional environments induced while launching of spacecraft can damage sensitive equipment or payloads, unless the equipment is properly designed. This is a critical issue for KOMPSAT-2 which will carry a high resolution electro-optic camera and a sophisticated attitude and orbit control system. Thus careful consideration on the launch environment is required in the design stage of spacecraft. This requires generation of vibration specification for each component. This paper describes the generation process of vibrational specification for KOMPAT-2, which is designed and tested by Korean engineers.