• 제목/요약/키워드: pavement temperature

검색결과 322건 처리시간 0.023초

교통개방을 위한 에폭시 아스팔트 콘크리트의 강도 예측모델 개발 (A Development of Strength Prediction Model of Epoxy Asphalt Concrete for Traffic Opening)

  • 백유진;조신행;박창우;김낙석
    • 대한토목학회논문집
    • /
    • 제32권6D호
    • /
    • pp.599-605
    • /
    • 2012
  • 교통개방시점의 예측은 공사 계획을 위해 중요하며 이를 위해 에폭시 아스팔트 혼합물의 양생에 따른 강도를 예측하는 것이 필요하다. 본 연구에서는 에폭시 아스팔트 혼합물의 양생온도와 시간에 따른 마샬안정도를 측정하고 이를 이용해 강도 발현식을 구하였으며, 변화하는 온도와 강도에 따른 반응속도를 반영할 수 있도록 화학적 반응속도론을 이용하여 에폭시 아스팔트 강도 예측모델을 개발하였다. 예측모델을 사용하여 에폭시 아스팔트 포장이 적용된 국내 교량에 대해 교통개방시기를 예측하였다. 2009년~2011년의 기상조건에 따라 가정된 포장체 온도를 사용한 예측결과는 실제 교통개방일과 17일의 차이가 발생했으나 이는 2012년의 실제 기상상태와의 차이 때문이다. 실제 측정된 포장 온도를 예측모델에 대입할 경우 2일의 교통개방가능일 차이가 있었으며, 상관관계 분석 결과 R2가 0.95로 실제 강도값과 매우 유사한 결과를 얻을 수 있었다. 기상상태와 포장체의 온도에 대한 충분한 데이터를 확보한다면 에폭시 아스팔트 강도 예측모델을 사용하여 상당히 신뢰도 있는 교통개방 가능 시기의 예측이 가능한 것으로 나타났다.

현장 모형 도로 축소 실험을 이용한 포장구성층의 동결 특성 분석 (Analisys on Freezing Characteristics of Pavement Layer Using the Feild Pavement Model test)

  • 신은철;류병현;문용수;박정준
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 춘계 학술발표회
    • /
    • pp.1164-1171
    • /
    • 2010
  • Korea is considered to be a seasonal frozen soil area that is thawed in the spring, and most of the area is frozen in winter as to the characteristic of geography. In the current design codes for anti-freezing layer, the thickness of anti freezing layer is calculated by freezing depth against the temperature condition. Therefore, they have a tendency of over-design and uniform thickness without the considerations of thermal stability, bearing capacity and frost susceptibility of materials. So, it is essential for studying the appropriateness and bearing capacity besides the seasonal and mechanical properties of pavement materials to take a appropriate and reasonable design of the road structure. In this research, the evaluation of frost susceptibility on subgrade, ant-freezing layer, sub base was conducted by means of the mechanical property test and laboratory field road model downed scale experiment. The temperature, heaving amount, heaving pressure and unfrozen water contents of soil samples, the subgrade, anti-freezing layer, sub base soils of highway construction site, were measured to determine the frost susceptibility.

  • PDF

국내 LTPP 온도 자료를 이용한 동결지수와 동결깊이 검증 연구 (Verification of Freezing Index and Frost Penetration Depth with Temperature Data of Korea LTPP)

  • 김부일;전성일;이문섭;임광수
    • 한국도로학회논문집
    • /
    • 제11권4호
    • /
    • pp.143-152
    • /
    • 2009
  • 본 연구의 목적은 현재 국내에서 적용되고 있는 동결지수와 동결깊이 산정의 타당성을 검증하는 것이다. 이에 국내에서 운영되고 있는 LTPP-SPS(Long Term Pavement Performance- Specific Pavement Study)구간의 대기온도와 포장체 깊이별 온도 데이터를 이용하여 동결지수와 동결깊이를 산정하였으며, 기존 계산식을 이용하여 산출된 동결깊이와 비교 분석하였다. 또한 이 구간들의 인근 측후소 데이터를 이용하여 연도별 동결지수 추이를 분석하였다. 본 연구 결과, 지구온난화에 의해 1987년 이후에는 동결지수가 급격히 감소하였으며, 현재 도로설계 시 적용되고 있는 동결지수가 과하게 적용되고 있음을 알 수 있었다. 이에 동결지수 산정 시 현행 30년 데이터를 토대로 산정하기보다 기후가 변화된 시점부터 현재까지의 추이를 분석하는 것이 바람직 할 것으로 사료된다. 또한 LTPP-SPS 구간에서 측정된 포장체 깊이별 온도데이터를 분석한 결과, 동상방지층이 설계되어 있는 3개구간에서 대체적으로 보조기층까지만 동결이 발생하는 것으로 나타나, 동상방지층이 제 역할을 수행하지 못하는 것으로 나타났다. 실제 측정된 동결깊이와 계산식을 통해 산정된 동결깊이를 비교한 결과, 노상동결관입허용법을 이용한 설계방법이 실제 측정된 동결깊이와 가장 유사한 경향을 나타내었다.

  • PDF

현장 계측자료를 이용한 아스팔트 포장체 온도 예측 연구 (A Study on the Temperature Prediction for Asphalt Pavement Using Field Monitoring Data)

  • 안덕순;박희문;엄병식;김제원
    • 대한토목학회논문집
    • /
    • 제26권1D호
    • /
    • pp.67-72
    • /
    • 2006
  • 아스팔트 포장체내의 온도예측은 역학적-경험적 포장설계법에서 포장의 거동해석 및 공용성 예측시 매우 중요한 요소 중에 하나다. 본 연구에서는 현장 온도 계측자료를 이용하여 아스팔트 포장체의 시간별, 깊이별 온도예측에 관한 연구를 수행하였다. 이를 위해 전국의 대표 지점을 선정하여 깊이별로 온도계측 센서를 매설하고 주기적으로 대기, 포장표면 및 내부온도를 계측하였으며, 이 현장 자료를 이용하여 개발된 온도 예측 모델의 보정을 수행하였다. 보정된 온도예측 모델을 이용하여 포장체의 표면 및 중간깊이의 온도를 예측한 후에 현장 계측자료와 비교분석하였다. 본 연구의 결과, 온도예측 모델에 필요한 계수값 중 가을철의 경우 태양흡수율과 방사율(emissivity) 값이 다른 계절과 다르게 나타났다. 아스팔트 포장체 중간 깊이에서의 예측과 실측 온도차는 ${\pm}3^{\circ}C$내이며, 온도 예측 모델이 현장 온도를 정확히 예측할 수 있음을 입증하였다. 또한, 온도예측에 있어서 지역별 특성의 영향은 받지 않는 것으로 증명되었다.

교차로 포장 소성변형 저감을 위한 해석적 연구 (An Analytical Study to Reduce Plastic Deformation in Intersection Pavements)

  • 최준성;이강훈;권수안;정진훈
    • 한국도로학회논문집
    • /
    • 제14권4호
    • /
    • pp.29-36
    • /
    • 2012
  • PURPOSES : Plastic deformation is frequently made in intersection asphalt pavement at its early age due to deceleration and stoppage of vehicles. This study has been performed to provide a mechanistic basis for reasonable selection of paving method to minimize the plastic deformation at intersection. METHODS : Pavement layer, temperature, traffic volume of the intersections managed by the Daejeon Regional Construction and Management Administration were collected to calculate asphalt dynamic modulus with pavement depth by using a prediction equation suggested by the Korean pavement design guide. Performance of ordinary dense-graded asphalt pavement, polymer modified asphalt pavement, and fiber reinforced asphalt pavement was analyzed by finite element method and the results were used in a performance model to predict the plastic deformation. RESULTS : In aspect of performance, the three paving methods were usable under low traffic while the fiber reinforced asphalt pavement was the most suitable under heavy traffic. CONCLUSIONS : Reasonable paving method suitable for traffic characteristics in the intersection might be decided by considering economic feasibility.

콘크리트포장의 줄눈의 잠김에 대한 연구 (A Study for Joint Freezing in Concrete Pavement)

  • 이승우
    • 한국도로학회논문집
    • /
    • 제3권1호
    • /
    • pp.165-176
    • /
    • 2001
  • 줄눈콘크리트포장의 줄눈은 온도 및 습도변화에 기인하여 발생하는 슬래브내에 무작위하게 발생하는 균열을 제어할 목적으로 설계된다. 이러한 인위적인 균열 (줄눈)은 자연발생적인 균열에 비하여 줄눈채움, 하중전달장치등의 보호대책을 강구하는 것이 용이하다는 장점을 가지고 있다. 줄눈채움의 잠재적인 이점은 표면수의 하부층으로의 침투로 인한 하부층의 약화 및 비압축성 물질 (작은 입자위 골재)의 줄눈내에 끼어듦으로 인한 스폴링을 방지하는데 있다. 합리적인 줄눈 채움의 설계를 위해서는 줄눈폭의 변화 (줄눈의 수평 움직임)의 산정이 중요한 입력요소이다. LTPP SMP 연구에 포함된 16개의 줄눈콘크리트포장의 줄눈의 수평움직임에 대한 장기 현장계측자료를 토대로 상당수의 줄눈에서 수평움직임을 허용하지 않고 있다는 것이 밝혀진바 있다. 이러한 현상을 줄눈잠김이라고 한다. 줄눈잠김이 발생하는 원인은 설계상에 계획된 줄눈부의 균열이 발생하지 않기 때문이라고 추정된다. 본 연구에서는 임의의 줄눈콘크리트포장에서 줄눈잠김의 비율을 예측할 수 있는 모델을 제시하였고 줄눈 잠김이 포장체의 성능에 미치는 영향을 조사하였다.

  • PDF

농촌 도로 포장용 준고온 아스팔트 콘크리트 적용 평가 (Evaluation for Application of Warm-mix Asphalt Concrete for Rural Road Pavement)

  • 이성진;김광우;김성운
    • 한국농공학회논문집
    • /
    • 제63권2호
    • /
    • pp.41-50
    • /
    • 2021
  • The asphalt pavement industry has introduced the warm-mix asphalt (WMA) as a mean of energy saving and environmentally safe technology, because the WMA mixture can be mixed and compacted at 30℃ lower than conventional hot-mix asphalt (HMA) at 160℃ or higher. The implementation of WMA can be a good option for paving operations for rural road in remote place, not only due to energy saving and environmental issues, but also lower working temperature. Using WMA technology, the cooled-down asphalt mixture can be still compacted to meet the quality requirement in narrow winding rural road in remote places. Therefore, this study is designed to evaluate engineering properties of WMA binders and concretes, which were prepared for rural road pavement. The objective of the study was to evaluate and suggest proper fundamental properties level of the WMA concrete for rural road pavement. The kinematic viscosity test result indicated that the WMA binders used in this study were effective for compaction at lower temperature, i.e., at 115℃, compared to the HMA binder. According to strength property analyses, it was found that the WMA concrete was acceptable for rural road pavement even though it was compacted at 30℃ lower level. Since the deformation strength (SD) of 3.2 MPa was found to satisfy rutting and cracking resistance minimum guidelines, this value was suggested as a minimum SD value for rural road pavement, considering lack of maintenance program for rural area.

열화상카메라를 이용한 블랙아이스 특성 연구 (Characteristics of Black Ice Using Thermal Imaging Camera)

  • 김승준;윤원섭;김연규
    • 한국산업융합학회 논문집
    • /
    • 제24권6_2호
    • /
    • pp.873-882
    • /
    • 2021
  • In this study, a study was conducted to develop a system for predicting/responding to black ice occurring on roads in winter. Tests conditions were studied by making models of cement concrete pavement and asphalt concrete pavement. In order to freeze water on the manufactured model package, an tests was conducted at a temperature below zero using a freezer, and the freezing process was photographed using a thermal imaging camera. Black ice is generated when water is present on the road surface and the temperature is below freezing or the road surface temperature is below the dew point temperature. Under sub-zero conditions, the pavement, water, and ice were classified with a thermal imaging camera. As a result of the tests, it was possible to distinguish with a thermal imaging camera at a temperature below freezing in the same freezer due to the difference in the emissivity of the packaging, water, and ice. In the process of changing from water to ice during the tests, it was analyzed that ice and water were clearly distinguished by the thermal imaging camera due to the difference in emissivity and reflectance, so black ice could be predicted using the thermal imaging camera.

무근 콘크리트포장 초기균열 거동 연구 (Behaviors of Early-Age Cracks on the JCP)

  • 박대근;서영찬;안성순;김형배
    • 한국도로학회논문집
    • /
    • 제6권2호
    • /
    • pp.47-59
    • /
    • 2004
  • 콘크리트포장에 초기균열을 일으키는 중요한 인자 중 하나는 콘크리트 내부의 초기온도이다. 따라서 콘크리트포장의 초기균열 발생원인을 연구하기 위해서는 초기온도를 계측하여 분석하는 일이 필요하다. 본 논문에서는 초기균열이 발생하는 슬래브 장소와 초기균열의 발생시간이 초기온도패턴에 어떤 영향을 받는지를 검증하였고 더불어, 줄눈부에서 발생하는 균열의 발생시점과 시공시간과의 관계도 알아보았다. 본 논문을 위해서 "중부내륙고속도로 여주-충주간 제 1공구 시험도로 건설공사구간 STATION 1+400$\sim$1+700" 지점에서 시험시공이 이루어졌으며, 시공 후 72시간 동안 i-Button(온도계측센서)을 이용하여 온도계측을 시행하였으며, 초기균열의 거동은 Demec gauge를 사용하였으며, 초기균열 및 줄눈부 균열은 육안으로 확인하였다. 초기온도패턴과 초기균열의 분석 결과, 콘크리트의 초기온도패턴은 슬래브에 초기균열이 발생하는 위치와 시각에 영향을 주는 것으로 나타났다 초기균열균열은 온도낙차폭이 가장 큰 슬래브에서 발생하였으며, 그 시각은 슬래브의 온도가 급강하하는 새벽이었다. 또한, 콘크리트 슬래브의 거동이 인근 줄눈부에 발생한 초기균열에 따라 영향을 받으며. 줄눈부에 발생한 균열의 발생시기가 서로 다를 경우에 균열의 거동이 달라질 수 있다는 가능성이 제시되었다. 그 외에도, 오전에 시공한 슬래브에서의 균열 발생률이 오후에 시공한것보다 더 큰 것으로 나타났으며, 균열의 발생 간격이 큰 균열이 그렇지 않은 균열보다 더 큰 균열틈을 보였다.

  • PDF

박스형 암거와 보강슬래브에 의한 줄눈 콘크리트 포장의 거동 (Behavior of Jointed Concrete Pavement by Box Culvert and Reinforced Slab)

  • 박주영;손덕수;이재훈;연우;정진훈
    • 한국도로학회논문집
    • /
    • 제14권6호
    • /
    • pp.25-35
    • /
    • 2012
  • PURPOSES : Hollows are easily made, and bearing capacity can be lowered near underground structures because sublayers of pavement settle for a long time due to difficult compaction at the position. If loadings are applied in this condition, distresses may occur in pavement and, as the result, its lifespan can decrease due to the stress larger than that expected in design phase. Although reinforced slab is installed on side of box culvert to minimize the distresses, length of the reinforced slab is fixed as 6m in Korea without any theoretical consideration. The purpose of this paper is investigating the behavior of concrete pavement according to the cover depth of the box culvert ad the length of the reinforced slab. METHODS : The distresses of concrete pavement slabs were investigated and cover depth was surveyed at position where the box culverts were located in expressways. The concrete pavements including the box culverts were modeled by finite element method and their behaviors according to the soil cover depth were analyzed. Wheel loading was applied after considering self weight of the pavement and temperature gradient of the concrete pavement slab at Yeojoo, Gyeonggi where a test road was located. After installing pavement joint at various positions, behavior of the pavement was analyzed by changing the soil cover depth and length of the reinforced slab. RESULTS : As the result, the tensile stress developed in the pavement slab according to the joint position, cover depth, and reinforced slab length was figured out. CONCLUSIONS : More reasonable and economic design of the concrete pavement including the box culvert is expected by the research results.