• Textile Coloration and Finishing
• /
• v.19 no.4
• /
• pp.32-37
• /
• 2007

In this study, we have obtained the protein patterns using the membrane patterning of soft-lithography technique. The rapid detection of protein including bovine serum albumin (BSA) was resulted from the interaction with 1,3-bisdicyanovinylindane. For the proof of the interaction between BSA and dye, the UV-vis absorption spectra of BSA and dye were observed at 278 nm and 580 nm, respectively. As expected, the absorption spectrum of the interaction between BSA and dye was observed at 584nm. The absorption spectrum of the interaction was red-shifted. In addition, the optical images of the selectively reacted protein patterns showed the distinctive change of patterned color at different pH conditions. Because the dye has negative charges, the charge of BSA at different pH conditions could influence the interaction behavior between dye and BSA. Therefore, in the case of pH 7, the selectively patterned protein substrates obtained deep blue color pattern caused by electrostatic interaction between negative charges of the dye and positive charges of the BSA. However, in the case of pH 10, selectively patterned protein substrates obtained light blue color pattern because the electrostatic interaction was relatively lower than pH 7 due to the change of overall charge distribution of BSA.

• Journal of Information Processing Systems
• /
• v.8 no.2
• /
• pp.359-374
• /
• 2012

In this paper, we propose a new machine vision algorithm for automatic defect detection on patterned textures with the help of texture-periodicity and the Jensen-Shannon Divergence, which is a symmetrized and smoothed version of the Kullback-Leibler Divergence. Input defective images are split into several blocks of the same size as the size of the periodic unit of the image. Based on histograms of the periodic blocks, Jensen-Shannon Divergence measures are calculated for each periodic block with respect to itself and all other periodic blocks and a dissimilarity matrix is obtained. This dissimilarity matrix is utilized to get a matrix of true-metrics, which is later subjected to Ward's hierarchical clustering to automatically identify defective and defect-free blocks. Results from experiments on real fabric images belonging to 3 major wallpaper groups, namely, pmm, p2, and p4m with defects, show that the proposed method is robust in finding fabric defects with a very high success rates without any human intervention.

• Korean Journal of Human Ecology
• /
• v.15 no.4
• /
• pp.585-595
• /
• 2006

The purpose of this study is to classify the fashion images on sportive style, to find out the difference between the image of sportive style which consumers prefer and the image of sportive style which they want to show and, finally, to analyze their purchase behavior. This research is done with survey method. The subjects of the survey are 835 females in their twenties or their thirties in Pusan area. The data are analyzed with factor analysis, Cronbach's alpha, $X^2$-test, and frequency analysis. The results of this study are as follows: first, sportive style is classified into Sexy, Romantic, Active and Modem image. Second, the results of analysis on consumers' preferring image and their wanting-to-show image to the above-mentioned image classification are as follows: firstly, the subjects' most preferring image and the image which they most want to show is Modem in1age. The second is Sexy image. But the subjects preferred having Modem image. Secondly, consumers' Individuality and apparel's Function are the important reasons to choose the sportive style. Thirdly, Modem image is the most preferred in the images of street wear. Sexy image and Active image are the preferred in the images of sports wear. Third, It is a vivid tone and a dark tone that is the color tone of sportive wear which consumers prefer. They prefer a logo- patterned sports wear, too. The consumers obtain most information on sports wear from sports wear stores. Silhouette is the most decisive design element in consumers' purchasing. The sports wear brands which the subjects prefer are Adidas and Nike.

• Journal of Fashion Business
• /
• v.18 no.3
• /
• pp.148-166
• /
• 2014

The purpose of this study is to establish the basic materials necessary for red carpet fashion design by examining the formativeness and fashion images of red carpet dresses at film festivals in the Great China Region. For the purpose of this study, research methods include a literature review on the origin and significance of red carpet dresses, the characteristics of film festivals in the Great China Region and their red carpet dresses as well as an analysis of the formative features and images of 615 red carpet dresses collected from each film festival official homepage, diverse media articles, and online search sites (www.google.com, www.hao123.com). The research finding can be summarized as follows: First, the formative features of red carpet dress designs were analyzed herein. It was found that the most frequently appearing type of silhouette was straight followed by hourglass and bulk in order. More specifically these included fit and flare, mermaid, trapeze, and slim in order. For the neckline styles, strapless was the most frequently seen followed by camisole, jewel, and one shoulder. Solid colors were more often seen than multiple colors. Bk, W, R, and YR were the most frequent main solid colors in order. Solid materials were frequent as well, such as soft and shiny materials. Non-patterned and unadorned styles were most frequent as for pattern types and details and trimmings. Second, the fashion images of red carpet dresses in the Great China Region were analyzed. The most frequent images were elegant, feminine, ethnic, modern, classic, avant-garde, others, mannish and sportive, in order.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.12
• /
• pp.62-67
• /
• 1997

The optical lithography wit an ArF excimer laser as a light source is expected to be used in the mass production of giga-bit DRAMs which require less than 0.2.mu.m minimum feature size. In this case, the distortion of a patterned image becomes very severe, since the lithography porcess is performed at the resolution limit. Traditionally, the photomask pattern was designed and revised with trial-and-error methods, such as repeated execution of process simulators or actual process experiments which require time and effort. Ths paper describes a program which automatically finds an optimal mask pattern. The program divides the mask plane into cells with same sizes, chooses a cell randomly, changes the transparent/opaque property of the cell, and eventually genrates a mask pattern which produces required image pattern. The program was applied to real DRAM cell patterns to produce mask patterns which genertes image patterns closer to object images than original mask patterns.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.53-55
• /
• 2005

The surface potential variations are measured, according to the enhanced measuring speed and voltage sensitivity, using an active device, such as a field effect transistor $(FET)^{1-3}$. In this study, the surface potential was mapped in the patterned $SiO_2$ medium at room temperature. An improved FET-tip cantilever, which has a source, a drain, and an n- channel, was used in this study. The potential images were analyzed both in the contact mode and the non-contact mode, using only a pre-amplifier system instead of a lock-in the amplifier.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.287-287
• /
• 2007

The ferroelectric and electric properties of UV-irradiated bismuth lanthanum titanate (BLT) films prepared using photosensitive starting precursors were characterized. The effects of lanthanum doping on ferroelectric and electric properties were investigated by polarization-electric field hysteresis loops and leakage current-voltage measurements. X-ray diffractometer and ellipsometry were served to provide the information about the crystalline structure and thickness of the films after annealing. The images of the surface microstructure and direct-patterned BLT films were observed by using scanning electron microscopy. The effects of lanthanum doping on the electric properties of direct-pattern able BLT films and their direct-patterning were studied.

• Journal of the Korean Society of Visualization
• /
• v.21 no.3
• /
• pp.7-14
• /
• 2023

In this study, we investigated the freezing delay time on surfaces with different patterns under -30° conditions through visualization experiments. Among various pattern structures, we fabricated the shape and surface of liquid from the spacing using circular filaments and hole structures. Additionally, using a high-speed camera, we visualized the freezing scenes, enabling us to obtain freezing images and measure the freezing time of the liquid. For each structure, the contact angle and solid fraction of the surface varied. We observed that the freezing delay time was longest when the contact angle was largest and the solid fraction was smallest within the experimental results. We analyzed the variation in anti-icing time using the heat exchange equation between the patterned surface and the liquid.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.51.3-51.3
• /
• 2019

Solar magnetograms are important for studying solar activity and predicting space weather disturbances1. Farside magnetograms can be constructed from local helioseismology without any farside data2-4, but their quality is lower than that of typical frontside magnetograms. Here we generate farside solar magnetograms from STEREO/Extreme UltraViolet Imager (EUVI) $304-{\AA}$ images using a deep learning model based on conditional generative adversarial networks (cGANs). We train the model using pairs of Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA) $304-{\AA}$ images and SDO/Helioseismic and Magnetic Imager (HMI) magnetograms taken from 2011 to 2017 except for September and October each year. We evaluate the model by comparing pairs of SDO/HMI magnetograms and cGAN-generated magnetograms in September and October. Our method successfully generates frontside solar magnetograms from SDO/AIA $304-{\AA}$ images and these are similar to those of the SDO/HMI, with Hale-patterned active regions being well replicated. Thus we can monitor the temporal evolution of magnetic fields from the farside to the frontside of the Sun using SDO/HMI and farside magnetograms generated by our model when farside extreme-ultraviolet data are available. This study presents an application of image-to-image translation based on cGANs to scientific data.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.3
• /
• pp.43-55
• /
• 2010

The major advantages to use CAD System are that it reduce time and effort to manufacture products, and also can demonstrate the condition of the final product prior to the actual manufacturing process of the selected design using the simulation programs in CAD system. Specially in weave design, for use as Computer-Aided Weaving system, the complicated Dobby weave can figured out easily through calculating the complex weave plans of multi shafts. As to one of dobby weave structures, Supplementary warp is the warp threads which are in addition to the regular warps of the woven fabrics, and used for decorating the band or expressing some patterns. The purpose of this study is to research the weave design of Supplementary warp using Computer-Aided Weaving system, which is dobby weave design program of Weave Point. For performing this design study, it was researched the classified woven fabrics depending upon weaving processing, Computer-Aided Weaving system, and the characteristic of Supplementary warp fabrics. On the basis of the theoretical research, Supplementary warp was worked for the 24-shafts AVL computer dobby loom that applied to the various patterned images. The design work was done by Weave Point program of dobby weave, and simulated to fabrics before woven into the computer dobby loom. To see the visual images of fashion items, these simulated bobby fabrics were processed by three-dimension modeling through YoungWoo CNI CAD system. All the patterns of the Supplementary warp in this study could be applied for decorating the fashion clothing and accessories.