• 한국잠사곤충학회지
• /
• 제16권1호
• /
• pp.21-48
• /
• 1974

본 연구는 fibroin을 피복하여 견섬유의 경막적 성질을 지배하는 sericin에 대한 일연의 연구를 수행하여 다음과 같은 결론을 얻었다. I. Sericin Fraction의 물리화학적 특성에 관한 실험 1) 난용성 sericin은 역용성 sericin에 비하여 polar side chain을 가진 amino산(Tyr, Ser)은 적은 반면 alanine과 leucine 등의 수화성이 적은 amino산이 측정되었다. 2) 수화성의 amine산은 견사의 외층부에서, 그리고 수화성이 적은 amino산은 fibroin에 가까운 부위에 많이 존재하였다. 3) 용수에 대한 sericin의 팽윤, 용해성은 alnino산 조성만으로 해석하기는 곤란하며 sericin의 결정구조나 이차구조와의 복합구조로 변화한다고 생각된다. 4) 견사의 간섭은 환상에 가까우나 정연처리로서 소멸하였다. 5) 작잠견 sericin은 가잠견 sericin과 차이가 있었는데 자오선상에 강한 환상 Ring이 많았다. 6) Mosher 법으로 분별한 A와 B fraction 사이의 amino산 조성에는 차이가 없었다. 7) Sericin I, II, III의 X-선도에 있어서는 큰 차이는 인정되지 않으나 측쇄간격에 해당 하는 Ring에서 차이가 인정되었다. 8) 분자량 150이상의 amino산(Cys, Tyr, Phe, His,Arg)은 6N-HCl, 60분의 가수분해로서 정양되지 않았다. 9) 4.6$\AA$의 X-선 간섭은 습열과 ether 및 alcohol로 처리하므로서 소멸하는 경향이었다. 10) sericin의 가수분해물(6N-HCl)은 자오선상에 간섭 Ring(2$\AA$)을 출현시켰다. 11) 가수분해 sericin 잔사는 어느 특정한 amino산의 peptide로 추정된다. 12) Seriein III의 분해온도는 Sericin I과 II보다 높았다. 13) 견층 부위별 sericin의 D.T.A 곡선에 었어서, 내층의 sercin은 15$0^{\circ}C$와 245$^{\circ}C$에서 흡열 peak가 나타나고 외, 중층의 것보다 고온측에 이동하였다. 14) IR-spectrum에 의한 sericin fraction(Sericin I, II, III, 외층, 중층 및 내층의 sercin)의 적외선흡수 결과는 일치하였다. II. 제사공정에서의 Sericin의 팽윤, 용해특성에 관한 실험 1) 3,000 R.P.M으로 침지처리된 견층의 자유성수분은 15분간으로 탈수가 가능하고 이 경우의 원심력은 13$\times$$10^4$dyne/g 이었다. 2) sericin에 대한 Folin시약의 발색에 필요한 시간은 실온에서 30분이었다. 3) 가시광선중 측정가능파장은 500~750m$\mu$이다. 4) 실제 비색정량의 경우 정도가 높은 측정치를 얻기 위해서는, 저농도(10$\mu\textrm{g}$/$m\ell$)인 때는 650m$\mu$에서 그 이상의 농도에서늘 500m$\mu$으로 측정해야 했다. 5) sericin과 egg albumin의 파장별 흡광도곡선형은 일치하나 흡광도는 sericin이 높았다. 6) 비색분석법에 의하여 측정된 sericin의 량은 Kjeldahl 법에 비해 적은 값을 나타냈다. 7) 견층의 팽윤, 용해도에 영향하는 처리조건으로서는 온도와 시간으로서 시간보다도 온도의 방과가 켰다. 8) 팽윤, 용해도를 촉진하는 처리온도와 시간과의 관계는 저온(7$0^{\circ}C$)에서는 시간의 증가에 따라서 팽윤, 용해도는 서서히 증대하나 고온에 있어서는 단시간의 처리로 현저히 증대했다. 9) 생견의 건조온도가 높아지면 견층의 팽윤, 용해도는 반대로 감소했다. 10) 견층의 두께가 크게 되면 일정시간에 있어서의 팽윤, 용해성은 저하하였다. 11) 견층부위별 팽윤, 용해성은 외>중>내층의 순이고 품종에 따라서는 견층부위별로 차이가 있었다. 12) 견층의 납물질제거처리를 하게 되면 sericin의 팽윤, 용해성은 대조구에 비해 감소하였다. 13) 음 ion 활성제는(pH 6.0 부근) sericin의 팽윤, 용해도를 촉진시켰다. 14) 양 ion 활성제는 위와 같은 조건에서 sericin 의 흡착현상을 나타내었다. 15) 경도성분(Ca, Mg)의 농도가 증가하면, 용수의 pH는 발성방향으로 이동하였다. 16) 용수중의 경도성분과 sericin과는 서로 완충작용을 나타내었다. 17) Ca와 Mg의 경도성분이 sericin의 팽윤, 용해에 미치는 영향을 비교하면 Ca 성분이 팽윤, 용해를 억제하였 다. 18) 용수중의 경도성분의 용존은 전기전도도를 증가시켰다.

• 암석학회지
• /
• 제27권3호
• /
• pp.109-120
• /
• 2018

경상분지 남동부 일대의 백악기 및 제3기 암류에서 발달하는 단층분절에 대한 분포특성을 도출하였다. 선형을 보이는 267조의 단층분절은 광역 지질도 상에서 표시된 곡선의 단층선에서 추출하였다. 첫째, 단층분절에 대한 방향각(${\theta}$)-길이(L)의 도면을 작성하였다. 관계도에서 단층분절의 전반적인 분포형태를 도출하였다. 도면의 분포곡선은 전체 형태에 따라서 4개의 구간으로 구분하였다. 상기 구간의 정점에 해당하는 북북동, 북북서 및 서북서의 방향은 양산, 울산 및 가음 단층계의 방향을 시사한다. 단층분절의 집단은 최대 정점에 해당하는 $N19^{\circ}E$의 방향에 대하여 거의 대칭 분포를 보여 준다. 둘째, 방향각-빈도수(N), 평균 길이(Lm), 총 길이(Lt) 및 밀도(${\rho}$)의 도면을 작성하였다. 관계도에서 상기한 도면의 전 영역을 분포곡선의 분포상에 의하여 19개의 영역으로 구분하였다. 상기한 영역의 정점에 해당하는 방향은 암체에 가해진 대표적인 응력의 방향을 시사한다. 셋째, 18개의 부집단에 대한 길이-누적 빈도수 그래프를 작성하였다. 관계도에서 지수(${\lambda}$)는 시계방향($N10{\sim}20^{\circ}E{\rightarrow}N50{\sim}60^{\circ}E$)과 반시계방향($N10{\sim}20^{\circ}W{\rightarrow}N50{\sim}60^{\circ}W$)으로 갈수록 증가한다. 반면 길이의 분포 폭 및 평균 길이는 감소한다. 서로 다른 진화 특성을 갖는 상기한 부집단에 대한 도면은 진화과정의 한 단면을 나타내고 있다. 넷째, 18개의 그래프에 대한 종합 분포도를 작성하였다. 관계도에서 상기한 그래프를 분포 구역에 따라 5개의 그룹(A~E)으로 분류하였다. 단층분절의 길이는 그룹 E ($N80{\sim}90^{\circ}E{\cdot}N70{\sim}80^{\circ}E{\cdot}N80{\sim}90^{\circ}W{\cdot}N50{\sim}60^{\circ}W{\cdot}N30{\sim}40^{\circ}W{\cdot}N40{\sim}50^{\circ}W$) < D ($N70{\sim}80^{\circ}W{\cdot}N60{\sim}70^{\circ}W{\cdot}N60{\sim}70^{\circ}E{\cdot}N50{\sim}60^{\circ}E{\cdot}N40{\sim}50^{\circ}E{\cdot}N0{\sim}10^{\circ}W$) < C ($N20{\sim}30^{\circ}W{\cdot}N10{\sim}20^{\circ}W$) < B ($N0{\sim}10^{\circ}E{\cdot}N30{\sim}40^{\circ}E$) < A ($N20{\sim}30^{\circ}E{\cdot}N10{\sim}20^{\circ}E$)의 순으로 증가한다. 특히 그래프의 형태는 균등 분포에서 지수 분포로 점차 변화한다. 마지막으로, 단층분절의 길이에 대한 여섯 개 변수의 값을 5개 그룹으로 구분하였다. 여섯 개 변수 중, 평균 길이 및 가장 긴 단층분절의 길이는 그룹 III ($N10^{\circ}W{\sim}N20^{\circ}E$) > IV ($N20{\sim}60^{\circ}E$) > II ($N10{\sim}60^{\circ}W$) > I ($N60{\sim}90^{\circ}W$) > V ($N60{\sim}90^{\circ}E$)의 순으로 감소한다. 그룹 V에 속하는 단층분절의 빈도수, 최장 길이, 총 길이, 평균 길이 및 밀도가 가장 낮은 값을 보여 준다. 5개 그룹 사이의 상기 배열순은 단층분절의 상대적인 생성시기와의 상관성을 시사한다.

• 한국전통조경학회지
• /
• 제34권1호
• /
• pp.40-52
• /
• 2016

창덕궁 후원의 부용정(芙蓉亭)은 독특한 평면형태, 공간구성, 건물의 장식 등이 뛰어난 비례와 대비를 이루고 있는 점을 인정받아 2012년 3월 2일에 보물 제1763호로 지정되었다. 그러나 지정사유가 형이하학적으로 평가되었고, 그마저도 왜 지금과 같이 독특한 형태로 조영되었는지 명확하게 규명하지 못하였다. 따라서 본 연구에서는 역사적 배경을 바탕으로 자연철학 및 사상에 관한 형이상학적 접근을 시도하였고, 조영의도와 공간구조의 특징을 규명하여 부용정의 정체성을 찾는데 주력하였다. 요약된 결과는 아래와 같다. 첫째, 부용정의 조영배경 및 특징: 정조는 즉위와 함께 창덕궁 후원에 규장각(奎章閣)을 창설하고 개혁정치의 일환으로 초계문신(抄啓文臣)을 양성하였다. 또한 각신(閣臣)들을 가인(家人)처럼 우대해주며 친정체계를 구축하였다. 정조의 적극적인 개혁정치는 신하들에게 후원을 구경시켜주기는 계기가 되었으며, 정조 16년(1792)에 각신을 중심으로 한 내각상조회(內閣賞釣會)를 공식적으로 발족하고 후원유람을 정례화하게 되었다. 후원유람은 꽃을 보고 낚시를 하는 상화조어연(賞花釣魚宴), 난정수계의 활동 등으로 이루어졌고, 이후 국가의 대신들이 참석하게 되면서 큰 행사로 발전하게 되었다. 정조는 대신, 중신, 각신들과 이러한 문화 활동을 함께하고 나아가 자신의 왕도정치를 실현할 장소로써 부용정을 조영한 것이었다. 둘째, 부용정의 입지와 공간적 특성: 정조는 즉위(1776)와 함께 택수재를 새롭게 개축하였다. 무엇보다 개유와-택수재-원도-어수문-규장각을 축선에 맞춰 연계한 점은 자신의 정치적 이상을 실현하기 위해 현재의 규장각 일원을 계획-설계한 것으로 판단할 수 있다. 정조 17년(1793)에는 기존의 사우정(四隅亭) 형태였던 택수재를 군신(君臣)이 함께할 수 있는 공간으로 조성하기 위해 위계를 두어 증축하고 부용정이라 칭하였다. 지당 위에 위치한 부용정의 북쪽공간은 임금의 공간으로 다른 곳보다 한 단 높게 조성하였고 창호도아자살로 차별화한 특징을 보인다. 서쪽과 동쪽은 신하들의 공간이다. 중앙공간은 양측의 신하들이 북쪽공간에 입어한 임금을 배알하기 위해 마련된 공간이며, 서쪽과 동쪽의 신하들은 부용정의 귀퉁이 공간을 돌아 남쪽공간에서 중앙공간으로 입실하게 되는 구조로 조영되었다. 결국 부용정은 최소한의 공간으로 편전(便殿)의 기능까지 수행할 수 있도록 설계된 정원건축물인 것이다. 셋째, 부용정의 문화적 가치: 부용정 일원은 세조, 인조, 현종, 숙종, 정조 등 왕들의 사유적인 정원문화가 복합적으로 존재하며 꾸준히 발전된 특징을 보인다. 특히 정조는 선왕들이 조성해놓은 다양한 물리적, 사회적, 상상적 환경 등을 계승하였고 더불어 자신의 왕도정치를 위해 신하들을 후원에 불러들였으며 그 중추적 장소로 부용정을 완성한 것이다. 곧 부용정은 조선왕조의 영속성이 반영된 정원건축물로 그 가치를 높게 평가할 수 있으며, 공간적으로도 유교사상이 정자에 반영되어 위계가 구분된 독특한 사례로써 왕의 정원에서만 나타나는 특수성을 잘 보여주고 있다.

• 한국농공학회지
• /
• 제19권1호
• /
• pp.4296-4311
• /
• 1977

This study was conducted to derive an Instantaneous Unit Hydrograph for the accurate and reliable unitgraph which can be used to the estimation and control of flood for the development of agricultural water resources and rational design of hydraulic structures. Eight small watersheds were selected as studying basins from Han, Geum, Nakdong, Yeongsan and Inchon River systems which may be considered as a main river systems in Korea. The area of small watersheds are within the range of 85 to 470$\textrm{km}^2$. It is to derive an accurate Instantaneous Unit Hydrograph under the condition of having a short duration of heavy rain and uniform rainfall intensity with the basic and reliable data of rainfall records, pluviographs, records of river stages and of the main river systems mentioned above. Investigation was carried out for the relations between measurable unitgraph and watershed characteristics such as watershed area, A, river length L, and centroid distance of the watershed area, Lca. Especially, this study laid emphasis on the derivation and application of Instantaneous Unit Hydrograph (IUH) by applying Nash's conceptual model and by using an electronic computer. I U H by Nash's conceptual model and I U H by flood routing which can be applied to the ungaged small watersheds were derived and compared with each other to the observed unitgraph. 1 U H for each small watersheds can be solved by using an electronic computer. The results summarized for these studies are as follows; 1. Distribution of uniform rainfall intensity appears in the analysis for the temporal rainfall pattern of selected heavy rainfall event. 2. Mean value of recession constants, Kl, is 0.931 in all watersheds observed. 3. Time to peak discharge, Tp, occurs at the position of 0.02 Tb, base length of hlrdrograph with an indication of lower value than that in larger watersheds. 4. Peak discharge, Qp, in relation to the watershed area, A, and effective rainfall, R, is found to be {{{{ { Q}_{ p} = { 0.895} over { { A}^{0.145 } } }}}} AR having high significance of correlation coefficient, 0.927, between peak discharge, Qp, and effective rainfall, R. Design chart for the peak discharge (refer to Fig. 15) with watershed area and effective rainfall was established by the author. 5. The mean slopes of main streams within the range of 1.46 meters per kilometer to 13.6 meter per kilometer. These indicate higher slopes in the small watersheds than those in larger watersheds. Lengths of main streams are within the range of 9.4 kilometer to 41.75 kilometer, which can be regarded as a short distance. It is remarkable thing that the time of flood concentration was more rapid in the small watersheds than that in the other larger watersheds. 6. Length of main stream, L, in relation to the watershed area, A, is found to be L=2.044A0.48 having a high significance of correlation coefficient, 0.968. 7. Watershed lag, Lg, in hrs in relation to the watershed area, A, and length of main stream, L, was derived as Lg=3.228 A0.904 L-1.293 with a high significance. On the other hand, It was found that watershed lag, Lg, could also be expressed as {{{{Lg=0.247 { ( { LLca} over { SQRT { S} } )}^{ 0.604} }}}} in connection with the product of main stream length and the centroid length of the basin of the watershed area, LLca which could be expressed as a measure of the shape and the size of the watershed with the slopes except watershed area, A. But the latter showed a lower correlation than that of the former in the significance test. Therefore, it can be concluded that watershed lag, Lg, is more closely related with the such watersheds characteristics as watershed area and length of main stream in the small watersheds. Empirical formula for the peak discharge per unit area, qp, ㎥/sec/$\textrm{km}^2$, was derived as qp=10-0.389-0.0424Lg with a high significance, r=0.91. This indicates that the peak discharge per unit area of the unitgraph is in inverse proportion to the watershed lag time. 8. The base length of the unitgraph, Tb, in connection with the watershed lag, Lg, was extra.essed as {{{{ { T}_{ b} =1.14+0.564( { Lg} over {24 } )}}}} which has defined with a high significance. 9. For the derivation of IUH by applying linear conceptual model, the storage constant, K, with the length of main stream, L, and slopes, S, was adopted as {{{{K=0.1197( {L } over { SQRT {S } } )}}}} with a highly significant correlation coefficient, 0.90. Gamma function argument, N, derived with such watershed characteristics as watershed area, A, river length, L, centroid distance of the basin of the watershed area, Lca, and slopes, S, was found to be N=49.2 A1.481L-2.202 Lca-1.297 S-0.112 with a high significance having the F value, 4.83, through analysis of variance. 10. According to the linear conceptual model, Formular established in relation to the time distribution, Peak discharge and time to peak discharge for instantaneous Unit Hydrograph when unit effective rainfall of unitgraph and dimension of watershed area are applied as 10mm, and $\textrm{km}^2$ respectively are as follows; Time distribution of IUH {{{{u(0, t)= { 2.78A} over {K GAMMA (N) } { e}^{-t/k } { (t.K)}^{N-1 } }}}} (㎥/sec) Peak discharge of IUH {{{{ {u(0, t) }_{max } = { 2.78A} over {K GAMMA (N) } { e}^{-(N-1) } { (N-1)}^{N-1 } }}}} (㎥/sec) Time to peak discharge of IUH tp=(N-1)K (hrs) 11. Through mathematical analysis in the recession curve of Hydrograph, It was confirmed that empirical formula of Gamma function argument, N, had connection with recession constant, Kl, peak discharge, QP, and time to peak discharge, tp, as {{{{{ K'} over { { t}_{ p} } = { 1} over {N-1 } - { ln { t} over { { t}_{p } } } over {ln { Q} over { { Q}_{p } } } }}}} where {{{{K'= { 1} over { { lnK}_{1 } } }}}} 12. Linking the two, empirical formulars for storage constant, K, and Gamma function argument, N, into closer relations with each other, derivation of unit hydrograph for the ungaged small watersheds can be established by having formulars for the time distribution and peak discharge of IUH as follows. Time distribution of IUH u(0, t)=23.2 A L-1S1/2 F(N, K, t) (㎥/sec) where {{{{F(N, K, t)= { { e}^{-t/k } { (t/K)}^{N-1 } } over { GAMMA (N) } }}}} Peak discharge of IUH) u(0, t)max=23.2 A L-1S1/2 F(N) (㎥/sec) where {{{{F(N)= { { e}^{-(N-1) } { (N-1)}^{N-1 } } over { GAMMA (N) } }}}} 13. The base length of the Time-Area Diagram for the IUH was given by {{{{C=0.778 { ( { LLca} over { SQRT { S} } )}^{0.423 } }}}} with correlation coefficient, 0.85, which has an indication of the relations to the length of main stream, L, centroid distance of the basin of the watershed area, Lca, and slopes, S. 14. Relative errors in the peak discharge of the IUH by using linear conceptual model and IUH by routing showed to be 2.5 and 16.9 percent respectively to the peak of observed unitgraph. Therefore, it confirmed that the accuracy of IUH using linear conceptual model was approaching more closely to the observed unitgraph than that of the flood routing in the small watersheds.

• 한국산림과학회지
• /
• 제36권1호
• /
• pp.9-25
• /
• 1977

소나무 천연집단(天然集團)의 변이(變異)를 조사(調査)하기 위(爲)해 1971년(年), 1975년(年)에 각각(各各) 3개집단(個集團)을 조사(調査)한데 이어 1976년(年)에 강원도(江原道)의 이제군(麟蹄郡) 기린면(麒麟面) 진동리(鎭東里)(집단(集團) 7)와 정선군(旌善郡) 임계면(臨溪面) 약천리(藥川里) (집단(集團) 8) 그리고 삼척군(三陟郡) 하장면(下長面) 한소리(汗沼里)(집단(集團) 9)에서 각각(各各) 1개집단(個集團)(한 집단(集團)에서 20주(株))씩의 임분(林分)을 택(擇)하였으며 외형적(外形的)으로 우량(優良)하다고 생각되는 임목개체(林木個體)를 대상(對象)으로 조사(調査)하였다. 대상임목(對象林木)은 외부(外部) 형태학적(形態學的) 특성(特性), 침엽(針葉)의 특성(特性), 재질(材質)의 특성(特性)이 조사분석(調査分析)되었고 그 결과(結果)는 다음과 같이 요약(要約)된다. 1. 3개집단(個集團)의 평균임령(平均林齡)은 50~63년간(年間)에 있고 성장(成長)은 비슷하였다. 직관(直觀)으로 판단(判斷)할 때 삼척집단(三陟集團)이 우량수형(優良樹型)을 가진 것으로 생각되었다. 지하고율(枝下高率)은 정선집단(旌善集團)이 0.53으로 가장 높은 값이었고 수관지수(樹冠指數)는 0.91로서 불량(不良)하다고 생각되었다. 삼척집단(三陟集團)은 세지성(細枝性)이라는 점(點)과 분지각(分枝角)이 가장 예각(銳角)이란 점(點)에 있어서 바람직했다. 수관장(樹冠長)은 모두 비슷했다. 2. 지하고대(地下高對) 수고(樹高) 그리고 수관지수(樹冠指數)의 빈도분포(頻度分布)를 보면 집단간(集團間)에 차이(差異)가 있는 것으로 사료(思料)되었다. 3. 거치밀도(鋸齒密度)는 3개집단(個集團) 모두 약 27로서 집단간(集團間) 유의차(有意差)는 없었고 개체간차(個體間差)가 큰 것으로 나타났다. 특히 높은 밀도(密度)를 가지는 개체(個體)(40이상(以上)의 것)가 있었다. 기공열수(氣孔列數)와 수지도수(樹指道數)에 있이거도 집단간차이(集團間差異)는 없었고 개체간차이(個團間差異)는 컸다. 4. 수지도지수(樹指道指數)(R.D.I.)에 있어서는 집단(集團)8이 0.074로서 다른 두집단(集團)의 2-3배(倍)의 값을 보였다. 5. 10년단위(年單位) 평균(平均) 연륜폭(年輪幅)의 성장과정(成長過程)은 초기(初期)(30년(年)까지)에는 집단간(集團間)의 차이(差異)가 있었으나 그 이후(以後)가 되면서 같은 값에 접근(接近)했다. 6. 평균추재졸(平均秋材卒)에 있어서는 집단간(集團間)의 차이(差異)가 없었으나 Range에 있어서 차이(差異)가 있었다. 가령 집단(集團)8은 23~30인데 집단(集團)9는 16~36으로 7 : 20의 차(差)를 나타내고 있다. 7. 목재비중(木材比重)은 평균치(平均値)에 있어서 집단간(集團間)의 차이(差異)가 없었고 Range에 있어서도 그러하였다. 수령(樹齡)의 증가(增加)에 따라 비중(比重)은 증가(增加)하나 그 증감(增減)의 과정(過程)은 집단(集團)에 따라 차이(差異)가 있다. 8. 가도관장(假導管長)은 집단간차이(集團間差異)가 없고 Range 또한 비슷하고 수령(樹齡)의 증가(增加)에 따라 그 길이가 증가(增加)하고 있었다. 증가경향(增加傾向)의 집단간차이(集團間差異)가 없었다.

• 한국식품영양과학회지
• /
• 제34권2호
• /
• pp.202-208
• /
• 2005

본 연구에서는 청소년기 남녀 중학생의 건강과 관련된 임상 증상에 따른 식습관, 영양지식, 영양태도를 알아보기 위하여 조사를 실시하였다. 좋지 않은 건강상태를 나타내는 임상증상 중 자주 생긴다고 답한 항목이 1개 이하인 경우를 건강군, 2개 이상의 항목에서 자주 생긴다고 답한 경우를 비건강군으로 분류하여 각 조사 항목을 비교 분석한 결과를 요약하면 다음과 같다. 전체 대상자들(524명)의 평균 연령은 14.0세였으며, 신장은 남학생 162.0 cm, 여학생 157.2 cm였고, 체중은 남학생 53.4 kg, 여 학생 49.4 kg으로 신장과 체중 모두 남학생이 높았다. 신장과 체중으로부터 산출한 체질량지수(BMI)는 남학생 20.3 kg/$m^2$, 여학생 20.0 kg/$m^2$로 모두 정상 범위에 속하였다. 건강군(289명)과 비건강군(235명)의 평균 연령, 체중, 신장, 체질량지수는 유의적인 차이를 보이지 않았다. 체형 인식, 만족도, 체중조절 시도여부를 비교한 결과 본인의 체형에 대한 인식은 건강군과 비건강군 간에서 유의적인 차이를 보이지 않았으나, 체형만족도에서는 유의적인 차이를 보여 본인의 체형에 만족하지 않는다는 비율이 건강군 여자의 33.1%에 비하여 비건강군 여자는 46.2%로 높게 나타났다(p<0.05). 지난 1년간의 체중조절 시도 여부에 대하여서도 비건강군 여자의 59.5%가 체중을 감소시키기 위하여 노력하였다고 답하여 건강군 여자의 38.5%에 비하여 유의적으로 높았다(p<0.01). 남학생의 경우에는 체형만족도와 체중 조절 경험에 있어서 두 군간 유의한 차이를 보이지 않았다. 영양지식과 영양태도 점수를 비교한 결과 건강군과 비건강군간에 유의적인 차이를 보이지 않았다. 끼니별 식사빈도를 조사한 결과 여자의 경우 아침식사를 주4회 이하로 하는 경우가 건강군은 30.7%였으나, 비건강군의 경우 44.0%로 높았다(p<0.05). 저녁 식사는 주 4회 이하의 식사를 하는 경우가 건강군은 10.7%인 반면, 비건강군은 18.8%로 아침 과 저녁 식사 모두 여자 비건강군의 결식률이 유의적으로 높게 나타났다(p<0.01).외식빈도는 남자의 경우 주 3회 이상에서 비건강군이 56.5%로 건강군의 42.7%보다 유의적으로 높았으며, 간식빈도는 여자의 경우 건강군에 비하여 비건강군이 유의적으로 높았다(p<0.05).식사의 구성을 조사한 결과 유의적인 차이를 보이지는 않았으나 비건강군이 건강군에 비하여 세 끼 식사의 구성이 불량하다고 답한 비율이 높은 경향을 나타내었다. 본 연구 결과를 통하여 건강의 이상 여부를 반영하는 임상증상의 빈도가 높은 청소년기 남녀 중학생의 경우 아침과 저녁의 결식빈도 및 외식과 간식의 빈도가 높았고, 아침식사의 질과 체형만족도가 낮은 것으로 나타나 청소년의 건강과 식습관 및 체형만족도가 상호 관련성이 높은 것으로 나타났다. 따라서 본 연구 결과는 성장기 청소년의 건강 유지를 위하여 바람직한 식습관의 중요성을 재인식할 수 있었으며, 올바른 식습관 확립을 위한 영양교육의 중요성이 재확인되었다.

• 한국산림과학회지
• /
• 제45권1호
• /
• pp.11-25
• /
• 1979

1979년(年) 8월(月) 4일(日)과 5일(日)에 걸쳐 강원도 평창지구에 많은 사태(沙汰)가 발생된 바 있었다. 이 지역(地域)을 답사할 기회를 통해 산사태에 대한 조사연구(調査硏究)가 부족(不足)하고 예방대책(豫防對策)이 미약하다는 사실을 알게 되었다. 이에 현지답사시(現地踏査時) 얻었던 자료(資料)와 기 연구자들의 보고서 등을 참조로 하여 우리나라 산사태(山沙汰)의 발생조직과예방대책을 살펴본 결과는 다음과 같았다. 1. 지난 6년간(年間)의 자료(資料)로 1일(日)200mm이상(以上), 1시간당(時間當) 60mm이상(以上)의 호우지대(豪雨地帶)를 보면 횡성, 원주, 영동, 무주, 남원과 순천을 연결하는 서부지역과 경상남도의 남부해안지방(南部海岸地方)에 분포(分布)되 있다. 이 원인(原因)은 산맥(山脈)과 저기압(低氣壓)의 방향(方向)에 영향을 받은 것으로 사료(思料)된다. 2, 호우(豪雨)의 정점(頂點)의 분포(分布)는 야간에 나타나며 이 시점에서 산사태(山沙汰)를 일으키고 막대한 피해(被害)를 주는 것 같다. 3. 평창지역(平昌地域)의 산사태(山沙汰)는 화강암(花崗巖)의 조사질양토(粗砂質壤土)와 석회암(石灰巖) 정암(貞岩)의 점토질토양(粘土質土壤)에서 발생(發生)하며 토석류(土石流)는 기암면(基岩面)이나 석회암토양(石灰巖土壤)에서 나타나는 반시(盤尸)을 따라 일어나고 있었다. 4. 이들 암석(岩石)에서 유래한 토양(土壤)의 투수력(透水力)은 빠른 것 같으며 화강암토양(花崗巖土壤)은 토성(土性)의 영향으로 석회암토양(石灰岩土壤)은 토양구조(土壤構造), 폐식(廢植)의 높은 함량(含量)과 근계(根系)의 영향 때문이다. 5. 산사태발생(山沙汰發生)의 근원지의 지형(地形)은 대부분 곡두(谷頭)의 요형지(凹型地)와 산복 상부의 요형(凹型)지에서 나타나고 있다. 이는 유거수(流去水)의 집수력(集水力)때문인것 같고 이 지점의 토양단면(土壤斷面)을 보면 석회암지대(石灰岩地帶)는 혼연성토양(混淵性土壤), 화강암지대(花崗岩地帶)는 발(髮)한 심토호(深土戶)으로 되있다. 6. 산사태지(山沙汰地)의 경사도(傾斜度)는 대부분 $25^{\circ}$이상(以上)에서 나타났고 경사위치(傾斜位置)는 산복상부의 6~9부 능선에서 나타났다. 7. 산사태지(山沙汰地)의 식피(植被)는 대부분 화전(火田)경작지, 화전초지(火田草地), 화전조림지(火田造林地), 황폐지(荒廢地)의 불량임분(不良林分)과 미림목지(未林木地)이었다. 일부 성림지(成林地)(중경목지)에도 나타났으나 대개 표상(表上)에 암석시(岩石尸)이 있는 지역이다. 8. 산사태위험도(山沙汰危險度)는 몇가지 환경인자(環境因子)로 즉 식피(植被), 경사도(傾斜度), 경사형태(傾斜形態) 및 위치(位置), 기암(基岩)과 분포형태(分布形態), 토양단면(土壤斷面)의 특성(特性) 등(等)으로 추정이 가능할 것 같다. 9. 가옥피해(家屋被害)는 대부분 다음과 같은 지형(地形)에서 나타나고 있다. 충적추(沖積錐)와 선상지요형사면(扇狀地凹型斜面)의 산록, 곡간(谷間)이나 야계변(野溪邊)의 소단구(小段丘)와 붕적토지(崩積土地) 등(等)이다. 가옥피해위험지(家屋被害危險地)는 항공사진으로 가옥(家屋)주위의 지형상태(地形狀態)를 참고를 하면 판정(判定)이 가능할 것 같다. 10. 산사태(山沙汰)의 예방대책(豫防對策)으로 위험지(危險地)의 진단기술(診斷技術)의 개발(開發), 현지조사(現地調査)를 통해 가능한 조속(早速)히 예방사방(豫防砂防)이 이루어져야 할 것이다. 가옥(家屋)과 부락(部落)의 피해예방대책(被害豫防對策)이 수립(樹立) 실행(實行)하여야 되며 재해방비림(災害防備林)의 조성책(造成策)이 고려되어야 할 것이다. 11. 산사태(山沙汰)에 의한 가옥(家屋)과 부락(部落)의 피해위험도(被害危險度)를 판정(判定)하여 지도사업(指導事業)을 통해 알려 주어야 한다. 12. 사태위험지(沙汰危險地)의 계벌작업(階伐作業), 화전경작(火田耕作), 연료채취(燃料採取)를 철저히 금지(禁止)시키고 피해위험지(被害危險地)의 가옥(家屋)신축을 규제시켜야 될 것이다. 따라서 산림경영계획(山林經營計劃)의 편성시 산사태(山沙汰)여부 토양침식(土壤浸蝕)과 홍수문제(洪水問題)들이 고려되어야 하며 재해예방대책(災害豫防對策)이 포함되어야 할 것이다.

• 한국산림과학회지
• /
• 제32권1호
• /
• pp.36-63
• /
• 1976

1974년(年) 천연(天然)소나무집단(集團)에 대한 유전적변이(遺傳的變異)를 분석(分析)하고져 먼저 경북(慶北) 청송군(靑松郡) 소재(所在) 주왕산(周王山)소나무림(林), 충남(忠南) 서산군(瑞山郡) 소재(所在) 안면도(安眠島) 소나무림(林), 그리고 강원도(江原道) 평창군(平昌郡) 소재(所在) 소나무림(林)을 대상(對象)으로하여 각(各) 집단(集團)에서 되도록 소면적(小面積)의 범위내(範圍內)에 서있는 소나무 개체(個體)를 각(各) 20주(株)씩 총 60주(株)를 택(擇)하여 그 모수(母樹)에 대한 형태학적(形態學的) 특성(特性)등을 조사측정(調査測定)하고 집단간(集團間)에 보이는 차이(差異) 그리고 한 집단내(集團內)에 있는 각개체수목(各個體樹木)의 형질(形質)을 조사보고(調査報告)한바 있다(제일보고문(第一報論文). 1974년(年) 가을에 가계별(家系別)로 종자(種字)을 채취(採取)하여서 가계별(家系別) 및 산지별(産地別)의 차이(差異)를 분석(分析)하고 동시(同時)에 그 종자(種字)를 파종하여서 1-0묘(苗) 및 1-1묘(苗)를 대상(對象)으로 생장인자(生長因子)에 대한 측정(測定)을 하고 그 유전력(遺傳力)을 계산(計算)해 보았다. 그밖에 엽록소함량(葉綠素含量) 또는 monoterpene등의 함량(含量)의 차이(差異)를 분석(分析)해 보았다. 종자(種字)의 형태학적(形態學的) 특성(特性)에 있어서는 집단간(集團間) 또 가계간(家系間)에 유의차(有意差)를 보이지 않는 것도 있었으나 대체(大體)로 유의차(有意差)가 인정(認定)되었다. 그리고 각형질간(各形質間)의 상관(相關)을 보았는데 구과폭(毬果幅)과 종자익(種字翼)의 폭(幅), 구과장(毬果長)과 종자익(種字翼)의 길이간(間), 그리고 구과(毬果) 생중량(生重量)과 종자중량간(種字重量間)에는 정(正)의 상관(相關)이 보였다. 묘고(苗高)와 근원경(根元徑)의 성장(成長)에 있어서는 가계간(家系間) 그리고 집단간(集團間)에 차이(差異)가 인정되었다. 묘고(苗高)의 유전력(遺傳力)은 집단(集團)의 평균치(平均値)를 가지고 분석(分析)하였다. 즉 집단(集團)에 관계(關係)되는 분산(分散)을 유전분산(遺傳分散)으로 보고서 유전력(遺傳力)을 계산(計算)해 보았는데 1-0묘(苗)의 묘고(苗高)에서는 0.29, 1-1묘(苗)에서는 0.14가 그리고 근원경(根元徑)에 있어서는 1-0묘(苗)는 0.15, 1-1묘(苗)에서는 0.06이였다. 기공열수(氣孔列數)에 있어서는 집단간차이(集團間差異)가 있었으나 거치밀도(鋸齒密度)에는 차이(差異)가 없었다. 침엽(針葉)의 특성(特性)에 관(關)해서는 모수(母樹)와 차대간(次代間)에 상관(相關)이 없었다. 엽록소함량(葉綠素含量)은 집단간차이(集團間差異)는 보였으나 가계간차이(家系間差異)는 없었다. monoterpene의 성분(成分)에 있어서는 myrcene과 ${\beta}$-phellandrene의 함량(含量)으로 집단차(集團差)를 볼 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.