• 한국전자통신학회논문지
• /
• 제11권3호
• /
• pp.263-270
• /
• 2016

본 논문에서는 변형된 항아리형 패치안테나를 사용하여 초 광대역 안테나를 구현하였다. 설계한 패치안테나의 물리적 길이와 홈(노치)를 광대역 특성 조건으로 최적화시켰으며, $10mm{\times}21.8mm$크기로 설계된 변형된 항아리형 패치안테나를 제작하였다. 설계된 최적화 패치안테나의 표면 전류분포를 분석하고 초 광대역 특성 조건을 만족함을 확인하였다. 실험 결과 제작된 초 광대역 패치안테나의 입력반사손실은 -10 dB 이하로 전압정재파비 역시 2 이하의 특성을 나타내었으며, 3.1~10.6 GHz 대역에서 약 1~3 dBi 이득범위를 나타내었다. 이와 같은 실험결과는 초 광대역 통신시스템에 활용이 가능할 것으로 판단된다.

• 한국초등과학교육학회지:초등과학교육
• /
• 제19권1호
• /
• pp.41-56
• /
• 2000

The purpose of this study was to investigate the change of elementary school students' conception on the movement of the moon, after teaching a lesson about the lunar phase which focused on concrete activities. The 396 subjects in this study consisted of intact groups of second, third, fourth, fifth, and sixth grade students. Pre-test and post-test instrument concerning on the conception in the movement of the moon were developed after reviewing the related literature and curriculum. Prevailing conceptions were identified by frequency of each conception. Then, the pattern of change and consistency of each conception were analyzed in comparison pre-test with post-test. To figure out the effect of teaching, the GEFT and the GALT instrument were administered to analyze it by gender, cognition mode and level. SPSS/WIN programs were used to process the data. The result showed that teaching 'movement of the moon' was the most effective in fourth grade. The effect of teaching 'changes in shape of the moon' was effective regardless of their sexes. Teaching 'changes in shapes of the moon' was more effective for the students whose cognitive modes were field-independent, than those filed-dependent. But the improvement by the teaching was not significantly different. The pre-score by cognitive level was significantly high in the order of the formal operational, transitional stage and the concrete operational stage. But the improvement of conception after teaching was high in the order of the concrete operational, transitional stage and the formal operational stage. That is to say, teaching was more effective as the cognitive level lowered.

• The Korean Journal of Ecology
• /
• 제1권2호
• /
• pp.44-48
• /
• 1977

The spawning behavior and developmental pattern of the Korean eleotrid fish (Odontobutis obscurus) was investigated in one of the tributary of Han River. The spawining of this species begins on April and continues up to August, whereas, the spawning. of same species were between the end of June and the middle of July in Kyushu, Japan. August The spawning places were the margin of river, its the bottom composed of sand and pebble (Table 5). The velocity of water in the spawning places was 0-40cm/sec, and the depth of waters was 10-40cm. The egg was spawned on underside of stone in the spawning places with one or two folds and ellipsoid in shape, 3.4mm in long diameter and 2.0mm in short diameter. The yolk is 1.2mm in diameter and yellow in color. For hatching of the egg, it takes one month in, $16^{circ}C~19^{\circ}C$ water, in Japan, whereas it takes only 14 days in $20^{circ}C~30^{\circ}C$ wate rin the study area. The growth rate of larva and juvenile fish were as follows: new hatched larva is 45mm in length; after 5 days it became 5.0 to 5.5mm in length and 1.2 to 1.5mm in height after 20 days. it became 11.0mm in length and 2.3mm in length. The mean size of the mature female is 110mm in total length and larger 10mm than that of the same fish found in Japan.

• 한국실내디자인학회논문집
• /
• 제41호
• /
• pp.104-111
• /
• 2003

Most residential buildings in Korea are preferred to have maximum interior spaces, rather than consider its original design, overall building performance, and any other aspects since early 1990's. Especially in high-rise apartment buildings, balcony has been merged to living room to get more interior spaces and this renovation trends have been producing deep and narrow shapes of living rooms that was not initially intended by architects. On the other hand, the same gross area of each unit does not necessarily mean same width and depth ratio of each residential unit. Generally, we can categorize it to the deep or wide unit based on its width and depth ratio. Under these circumstances, this study analyzes the room usage pattern changes based on the space width and depth ratio and the effect of expansion of room space to the balcony. This study also includes about 180 apartments plan case studies to find out the relationships among w/d ratio changes, furniture arrangement types, and room configurations. In this research, general apartment room w/d ratios are 0.97 ∼ 1.23; 0.7(south facing sitting room), 1.23(south facing bed room), and 0.95(north facing bedroom). But, after expanding room space to balcony w/d ratio increased as follows; sitting room become 1.31, general south facing bedroom become 1.23, and north facing bedroom become 1.45. In addition to user preference of w/d ratio, many people prefer rectangular room shape a little(w/d ratio is 0.9 or 1.2) than square style (w/d ratio is 1.0) or very deep room style (w/d ratio Is more over 1.5). Accordingly, expanding the room space to balcony may make unsatisfactory room w/d ratio. Expanding room space to balcony should be considered by existing room w/d ratio.

• 대한치과보철학회지
• /
• 제25권1호
• /
• pp.227-242
• /
• 1987

This study was designed to investigate the pulpal effects of the glass ionomer cement. (Lining cement, G-C Co. Japan) For this purpose, 10 cats were selected, and Class V cavities were prepared on canines of the cats. One experimental group was filled with glass ionomer cement and the other group was filled with zinc phosphate cement . (G-C Co, Japan) The animals of the experimental and control group were sacrificed at 1,2,3,4,6, weeks after the experiment. For comparison of reparative dentin formation pattern in direction of the pulpal and fractured lateral surface, each of them was observed with scanning electron microscope. The findings led to the following conclusions; 1. Reparative dentin of the glass ionomer cement and zinc phosphate cement filling groups were formed on the internal surface of dentin as the shape of hemispherical and spherical with a rough surface. 2. Some of reparative dentin of the glass ionomer cement filling group was started to form at 1 week after experiment, and at 6 weeks after experiment, it had been increased gradually in number and size. 3. Reparative dentin of zinc phosphate cement filling group was formed vigorously, however, gradually was decreased in number and size, and disappeared at 6 weeks after experiment. 4. During the formation of reparative dentin, peritubular dentins were indistinguishable. 5. The diameter of dentinal tubules of reparative dentin has been decreased, during the reparative dentin formed, and it became very irregularly at 6 weeks after experiment.

• 한국지열·수열에너지학회논문집
• /
• 제12권4호
• /
• pp.40-46
• /
• 2016

In order to improve air quality of indoor environment, studies of the underfloor air distribution (UFAD) system for application in buildings are actively in progress based on temperature and air flow distribution. However, although the age of air is the major evaluation parameter, there has been very little study on this parameter for the UFAD system. In this study, we investigated the age of air to reach the air diffuser, which is installed at the bottom of the interior by the UFAD system. Computational fluid dynamics simulations showed no regular pattern to the maximum value of the age of air in accordance with air flow rate and the velocity at air diffuser. These factors can be deduced from air movement by considering that air emitted from air conditioners was rotated according to the bottom shape of the floor, and then, the age of air in the rotation center was increased. The average age of air of internal interior was reduced considerably as the flow velocity at the underfloor air diffuser was increased from 0.5 m/s to 1.0 m/s However, the age of air was not substantially affected with change in the air volume. Moreover, when the flow velocity at the underfloor air diffuser was higher than 1.0 m/s, the age of air showed no significant difference with change in air volume or height of measurement. These results imply that indoor air quality is more substantially influenced by flow velocity than air volume, and the appropriate flow velocity is 1 m/s or more.

• 복식
• /
• 제57권10호
• /
• pp.24-34
• /
• 2007

The purpose of this study is to examine the pieces of 100 fabrics excavated from unknown woman's tomb Incheon, by analyzing woven methods, names of the fabrics, the kinds and the shapes of the patterns. The characteristics to assume the period of the fabrics are as follows. The geumsundan which was woven peacock insignia at chest and back area was excavated for the first time from the tomb of Joseon. Peacock insignia woven with satin weave using supplementary golden wefts, wrapped gold thread. These kind of fabrics were usually imported in the $15^{th}$ century, according to the old documents, 'Nogeoldae' 'Joseonwangjosilrok' written at the end of Goryeo or early in Joseon. Thus, these relics are from about $15^{th}$ century. From this tomb, the mixture fabric of cotton and ramie are excavated. According to another excavated cases, the mixture fabric of cotton and ramie appears from the period before the Japanese Invasion of Korea in 1592, and after the invasion, there are usually mixture fabric of cotton and silk. This also tells that these fabrics show the characteristics of those from the early period of Joseon Dynasty. The rounded patterns of Jangot is only shown from the fabrics of late Goryeo Dynasty, and the cloud pattern of an upper garment with a squared neckline is shown from the early Joseon Dynasty. So, the patterns from these excavated costumes are ranged from the late Goryeo Dynasty to the early Joseon Dynasty. To assume the period through the overall study above, these relics show the characteristics of the $15^{th}$ century fabric.

• 한국의류산업학회지
• /
• 제19권4호
• /
• pp.385-399
• /
• 2017

This study will broaden the application of doll costume product with historical characteristics and the image of unlined cheollik in the $17^{th}$ century period of transition during the Joseon Dynasty. Historical design sources were extracted from old documents and precedent studies. Unlined cheollik of Shin Gyeong-yu, meritorious retainer, were selected as main reference-relic because of various fabric, preserved conditions and definite shape. 'Baby doll' was selected as main model because of consumer preferences and awareness. Design sources from unlined cheollik in the early $17^{th}$ century were about a 1:2 ratio of upper and under parts, removable separated doori-somae, knife-shaped collar (outside), projected square collar (inside), long pleats line, side slit, traditional flat fell seam sewing. Trapezoidal side line, round waistline, and thin fabric were applied in designs because of toddler-body of doll model. Three designs were produced in step 1: Cheollik A focusing on the historical remake (traditional type), Cheollik B with belt and side slit (crossover type), and Cheollik C with back- opening (modern type). In step 2, interview with fashion major student was conducted to increase the utility of designs. As a result, modern trend sources (frill, velcro, round armhole line, slope of sleeves, and floral pattern) were reflected in Cheollik B, C. Finally, three doll cheollik and cheollik-styled doll apron sample were produced. Various versions must be suggested in the study of doll costume products with traditional sources that balance historical characteristics and practicality to improve customer satisfaction.

• Journal of Mechanical Science and Technology
• /
• 제20권5호
• /
• pp.710-716
• /
• 2006

Micro-PIV system with a high speed CCD camera is used to measure the flow field near the advancing meniscus of a water slug in microchannels. Image shifting technique combined with meniscus detecting technique is proposed to measure the relative velocity of the liquid near the meniscus in a moving reference frame. The proposed method is applied to an advancing front of a slug in microchannels with rectangular cross section. In the case of hydrophilic channel, strong flow from the center to the side wall along the meniscus occurs, while in the case of the hydrophobic channel, the fluid flows in the opposite direction. Further, the velocity near the side wall is higher than the center region velocity, exhibiting the characteristics of a strong shear-driven flow. This phenomenon is explained to be due to the existence of small gaps between the slug and the channel wall at each capillary corner so that the gas flows through the gaps inducing high shear on the slug surface. Simulation of the shape of a static droplet inside a cubic cell obtained by using the Surface Evolver program is supportive of the existence of the gap at the rectangular capillary corners. The flow fields in the circular capillary, in which no such gap exists, are also measured. The results show that a similar flow pattern to that of the hydrophilic rectangular capillary (i.e., center-to-wall flow) is always exhibited regardless of the wettability of the channel wall, which is also indicative of the validity of the above-mentioned assertion.

• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.849-863
• /
• 1992

본 연구에서는 훨씬 간단하고 직교 다항식이 아니더라도 단지 기하학적 경계 조건만을 만족하는 단순 급수함수(simplified series function)와 Rayleigh-Ritz met- hod를 이용하여 동방성 및 복합재료 직각삼각형에 대하여 수렴성을 검토하고, 경계조 건의 변화와 직교이방성 재료의 물성치 E$_{1}$, E$_{2}$, G, .nu.$_{12}$의 변화와 기 하학적 형상비 .alpha.=b/a의 변화가 무차원 고유진동수에 대해 얼마나 영향을 미치는지를 조사하고, 각 mode 별 nodal patterns과 mode shapes의 변화를 시각적으로 제시하여 보이므로써, 유사한 문제를 단순화시켜 효율적으로 해석 할수 있음을 보이고자 한다. 따라서 본 연구에서는 두개의 직각좌표가 경계에서 동시에 변하는 가장 간단하면서도 대표적인 직각 삼각형에 대해서 논하고, 앞으로 모든 임의의 형상에 대해서도 확장할 수 있는 가능성을 제시하고자 한다.다.