• 제목/요약/키워드: pattern shape

검색결과 2,323건 처리시간 0.029초

이온교환수지 촉매를 이용한 옥탄가 향상제인 TAME 합성반응의 연구 (A Study over Catalytic Behavior Octane Enhancer, TAME Synthesis with Ion Exchange Resin Catalysts)

  • 박진화
    • 공업화학
    • /
    • 제7권5호
    • /
    • pp.832-842
    • /
    • 1996
  • 성질이 서로 다른 그물 구조형 이온교환수지인 Amberlyst-15, Amberlyst-15(wet)와 Amberlyst XN-1010을 가지고 고정층 상압 유통식 반응장치에서 옥탄가 향상제인 TAME 합성반응을 행하였다. Amberlyst-15가 Amberlyst-15(wet)와 Amberlyst XN-1010에 비해 활성이 좋았는데 그 이유는 겔형 미세입자 내부 활성점의 반응참여 정도가 크기 때문으로 생각되며, TAME 합성반응의 최적 조건들은, 반응온도=$135^{\circ}C$, 반응물 몰비(MeOH/I.A.A.)=1.0~4.0, W/F=2.0~4.0 gr.-cat. hr/gr.-mole일 때이었다. X-ray 회절 분석결과 $2{\theta}=20$에서 styrene divinyl benzene이 가교결합을 나타냈으며, DSC 분석결과 열적 안정성의 순서로는 Amberlyst-15, Amberlyst-15(wet) 및 Amberlyst XN-1010이였다. 본 실험에서 구한 TAME 합성의 겉보기 활성화 에너지 값은 Amberlyst-15:Ea=12.36 kcal/mole, Amberlyst-15(wet):Ea=12.46 kcal/mole 및 Amberlyst XN-1010:Ea=14.72 kcal/mole이였다.

  • PDF

Comparison of the ICT Adoption Pattern;In the Case of Korea and the U.S.

  • Yang, Kyung-Hoon;Lee, Sang-Gun
    • 한국경영정보학회:학술대회논문집
    • /
    • 한국경영정보학회 2007년도 International Conference
    • /
    • pp.545-550
    • /
    • 2007
  • The aim of this paper is to find out whether there is a difference in adopting and/or diffusing the information and communication technology (ICT) between countries. If there is, what are the primary factors that keep some countries from adopting and diffusing ICT while others do? To analyze the above problem, we adopted the Unified Theory of Acceptance and Use of Technology (UTAUT) suggested by Venkatesh et al. (2003), which consists of effort expectancy, performance expectancy and social influence. We also use the innovation diffusion functions, which are known to have the S-shape and are made up of the introduction, growth, maturity and decline phases. We do not, however, consider the decline phase, because the ICT that we are considering is not believed to be in that phase. Therefore, we researched how the three factors affect adoption in the three phases. We selected the cellular phone as the ICT, because it is considered to be the most popularly used ICT and its technology has been developing rapidly. We surveyed the cellular phone adopters in Korea, and the U.S. for 15 years from 1989 to 2003. Korea, and the U.S. represent newly developed and developed countries, respectively. For the data analysis, a survival analysis was used, as it could explain the characteristics of the potential adopters or non-adopters. We found that the ICT diffusion patterns, as well as the ICT diffusion factors, of the two countries were different. Therefore, we believe that the results of our research can be used in building strategies on reducing the digital divide gaps between countries.

  • PDF

청소년(靑少年) 문화(文化)가 스트리트 패션에 미친 영향(影響) - 1960년대(年代)를 중심(中心)으로 - (The Influence of the Youth Culture on the Street Fashion - On the Focus in 1960s -)

  • 간문자
    • 패션비즈니스
    • /
    • 제2권1호
    • /
    • pp.35-48
    • /
    • 1998
  • The purpose of this paper is to examine the street fashion, which is influenced by the youth culture in 1960s. Youth culture is the youth subculture which appeared multiform in the 1960s. It tried to create a new culture by subverting the ruling class culture with their combative life style and peculiar appearance which are distinguished from mother culture. Youth cultures as youth subculture are symbolically expressed in their style which had strong characteristics of sub-fashion and anti-fashion, and which are different from mother fashion in shape. Therefore youth subculture fashion had an effect on street fashion in the 60s. The influence that the youth culture fashion had had on the street fashion is summarized as follows: Beats fashion was intelligency look on black dress, black polo-neck shirts, black trousers, black glasses and heavy black eyeliner. Mods fashion was neat style on Edwardian suit with narrow trousers, pointer-toeshoes and smooth croped hair. Folkis fashion was ethnic look, middle east asian look, peasant look, Indian style, south america look, gypsy style, natural materials, natural dying, tie-dye, beads and hand made ornaments. Rockers fashion was violence appearance categorized 'blue collar' on black leather jacket decorated with metal studs and hand-painted insignia, blue jeans and boots for motor bike. Swinging London & the Psychedelics fashion was blend mods look with pschedelic color and motive pattern. Hippie fashion was intermix pschedelic and natural or ethnic style. It was appear to be a meaningless, unpredictable assortment of diverse items and style. Faded and tattered jeans, army jackets, vintage hat, beads, embroidered headband, white sheets, diverse theatrical costumes, sandals or bare feet, granny dress, peasant blouse, blanket cape, tie-dye T-shirts and long hair. Greasers fashion was adorned black leather jacket with chains, fringing, badges, insignia and sleeves had been crudely ripped off. They came to be known wore jeans so soaked with oil. Skinheads fashion was aggressive working class identity with donkey jacket, jeans rolled up, collarless union shirts, heavy boots, braces and hair cropped short.

  • PDF

저서어자원량의 음향추정에 있어서 해저기준과 해저 오프셋의 최소화 (Stable Bottom Detection and Optimum Bottom Offset for Echo Integration of Demersal Fish)

  • 황두진
    • 수산해양기술연구
    • /
    • 제36권3호
    • /
    • pp.195-201
    • /
    • 2000
  • 계량어군탐지기를 이용하여 저서어를 대상으로 에코적분을 행하는 경우, 적분범위의 하한을 결정하기 위해 설정하는 해저기준이나 해저오프셋은, 저서어 자원량추정의 중요한 요인 중의 하나이다. 해저부근의 어군에코의 해석으로부터 해저기준의 결정방법과 최적 오프셋에 관하여 고찰한 결과, 다음과 같은 결과를 보였다. 1) 적분층의 폭을 5m로 하여, 적분범위를 1샘플링씩 해저방향으로 이동하면서, 해저부근의 S$\sub$a5m/의 변화를 본 결과, 해저부근의 어군에코를 적분하기 위해서는, 적분범위의 하한을 가능한 해저까지 접근시켜야 한다. 2) 에코레벨의 역치로서 해저검출을 행한 경우, 역치가 클수록 해저 검출 불능횟수가 증가하고, 작을수록 해저 오검출 횟수가 늘어 났다. 3) 에코레벨의 최대변화점을 해저기준으로 한 해저검출법은, 그 정도가 매우 높았으며, 나아가 에코레벨의 변동에 대해 아주 안정한 해저기준 알고리 즘으로 적합하였다. 4) 이 해저검출 알고리즘에 의하면, 최적해저오프셋은 해저 기준으로부터 0.4ms이내였고, 이것은 펄스파형과 해저지형에 대한 음향빔에 의존한다.

  • PDF

초음속 2유체 분무노즐의 유동 특성 (Flow characteristics of supersonic twin-fluid atomizers)

  • 박병규;이준식
    • 대한기계학회논문집B
    • /
    • 제20권7호
    • /
    • pp.2267-2276
    • /
    • 1996
  • 공정산업분야 및 분무연소분야에서 많이 사용되고 있는 2유체 분무기에서 출구 초음속유동의 가시화와 하류의 가스압력 측정 결과로부터 다음과 같은 결론을 얻었다. 1) 과소팽창 또는 과대팽창 초음속노즐 유동에서 출구 Mach수가 일정한 경우, 유동이 박리하지 않는다면 가스의 정체압력(유량)이 증가함에 따라 노즐출구에서 충돌정체점까지의 길이와 초음속 유동영역의 길이는 증가한다. 2) 스피팅 현상은 액체공급관 출구의 흡인압력은 분사가스압력이 증가함에 따라 단조증가하지만 분사가스압력이 0.5MPa이상이 되면 증감현상이 커지며 돌출형 노즐에서 유동박리시 급격히 증가한 다음 거의 일정하게 유지된다. 4) 액체공급관 하류축상의 압력변화는 출구의 음압에서 충돌정체점까지 상승한 다음 급강하하고 충격파 세포상의 구조에 따라 진동하면서 대기압에 도달한다.

다중 코일에 의한 콘크리트내의 철근 탐지 시 신호 특성 (Signal Characteristics of Multi-coil Probe for the Test of Reinforcement Embedded in Concrete)

  • 김영주;이승석;윤동진
    • 비파괴검사학회지
    • /
    • 제20권4호
    • /
    • pp.285-289
    • /
    • 2000
  • 본 연구는 콘크리트내의 철근의 굵기와 깊이를 동시에 측정할 수 있는 기술 개발에 관한 것이다. 개발된 탐촉자는 기존의 철근 탐지기와 다른 구조를 지니는데 감지 코일이 세 개로 구성되어 있다. 따라서 세 가지 신호를 동시에 측정하여 분석함으로써 철근의 굵기와 깊이를 분석하도록 되어 있다. 탐촉자 내 코일의 전압과 위상 변화를 임피던스 분석기를 이용하여 조사하고 그 전달함수의 괘적을 분석하였다. 여기 코일 내부에 장착된 감지 코일은 알려진 바와 같이 단순한 변화 형태를 나타내었으나 여기 코일 밖에 장착된 코일의 경우 변화 곡선이 복잡하였다. 실제 철근탐지 실험은 일반 와전류 탐상기를 이용하였는데 여러 가지 철근의 굵기와 깊이에 대하여 실험하였다. 철근 깊이에 따른 신호 변화는 임피던스 분석기에 의한 전달함수 변화에서 나타낸 것과 비슷한 경향을 나타내었으며 감지 코일마다 다른 전압의 변화를 이용하여 철근의 굵기와 깊이의 동시 측정이 가능하였다.

  • PDF

펄프.제지용 원료로서의 삼 섬유 이용에 관한 연구(제 1보) -대마 구성 세포의 현미경적 관찰- (Effective Utilization of Hemp Fiber for Pulp and Papermaking (I) -Morphological Characteristics of Hemp Fiber-)

  • 윤승락;이명구
    • 펄프종이기술
    • /
    • 제42권1호
    • /
    • pp.7-12
    • /
    • 2010
  • Morphological characteristics of hemp fiber were investigated using a light microscope in order to provide fundamental data for the use of hemp as a papermaking law material. Phloem of hemp is composed of cortical parenchyma cells and bast fiber with thick walls while xylem is composed of vessel, wood fiber and ray parenchyma cells. Also there are solitary pore and radial pore multiple which exist in diffuse porous pattern. Ray cells consist of uniseriate rays and thin walled ray parenchyma cells. Wood fibers are composed of three types: a large diameter fiber with longer length; a large diameter fiber with shorter length; a small diameter fiber with medium length. Vessel elements are composed of: a medium length one; a longer length one; the one whose both end walls have ligules or tails. Parenchyma cells in xylem and pit parenchyma cells have completely different size and shape. For bast fiber, the average length is about 4.4 mm and the width is about $30.5\;{\mu}m$; for vessel element, $600.0\;{\mu}m$ in length and $493.6\;{\mu}m$ in width; for wood fiber, $1000\;{\mu}m$ and $38.9\;{\mu}m$; for parenchyma cell, $50\;{\mu}m$ and $26.4\;{\mu}m$.

전방향성 E & H면 슬릿 Folded형 마이크로스트립 패치 안테나 (Slit Folded Type Microstrip Antenna for Omnidirectional E-plane and H-plane)

  • 김종래;우종명;오승엽
    • 한국전자파학회논문지
    • /
    • 제13권9호
    • /
    • pp.956-963
    • /
    • 2002
  • 본 논문에서는 SIR(Stepped Impedance Resonator) 구조를 이용한 compact한 slit-folded형 마이크로스트립패치 안테나를 제작하였다 기존의 길이 방향의 $\lambda_{g}/2$ 공진을 이용한 평면형 마이크로스트립패치 안테나를 길이방향 중심에서 반으로 접어서 마이크로스트립 급전선으로 급전하여 전방향성 방사패턴을 얻은 Folded형 마이크로스트립 안테나를 적층형으로 제작시 급전선의 영향을 줄이기 위하여 급전방법을 상하면 패치사이의 접지면 위에 설계하여 급전핀을 세웠다. 또한 평면형 H형 SIR 구조를 Folded형 안테나에 적용한 슬릿 folded형 안테나는 기존의 folded형 안테나에 비하여 27.5 % 더 소형화하였다. 기존의 folded형 마이크로스트립 안테나는 E면(zx-plane)과 H면(xy-plane)의 평균이득이 거의 1.8 dB 정도의 차이를 보였으나 본 논문에서 제안한 슬릿 folded형은 E & H-plane의 평균이득차이가 0.1 dB로 거의 같음을 알 수 있다.

실시간 감정 표현 아바타의 설계 및 구현 (Design and Implementation of a Real-Time Emotional Avatar)

  • 정일홍;조세홍
    • 디지털콘텐츠학회 논문지
    • /
    • 제7권4호
    • /
    • pp.235-243
    • /
    • 2006
  • 본 논문에서는 얼굴의 표정 변화를 인식하여 실시간으로 감정을 표현하는 아바타를 설계하고 구현하는 방법을 제안하였다. 실시간 감정 표현 아바타는 수동으로 아바타의 표정 패턴을 변화를 주는 것이 아니라 웹캠을 이용하여 실시간으로 입 모양 특징을 추출하고 추출한 입 모양의 패턴을 분석한 뒤, 미리 정의된 표정 패턴에 부합되는 것을 찾는다. 그리고 부합된 표정 패턴을 아바타에 적용하여 아바타의 얼굴 표정을 표현한다. 표정 인식 아바타는 웹캠에서 들어온 영상을 모델 접근 방법을 이용하여 보다 빠르게 입 부분을 인식할 수 있도록 하였다. 그리고 표정 패턴 추출은 표정에 따라 입 모양이 변하는 것을 이용하였다. 모델접근 방법을 이용하여 눈의 정보를 찾은 후 그 정보를 이용하여 입 모양을 추출하게 된다. 기본적으로 13가지 입 모양으로 각각의 표정을 유추하고 각 표정 패턴에 맞는 6개의 아바타를 미리 구현하여 보다 빠르게 아바타의 표정을 변할 수 있게 하였다.

  • PDF

사출/압축 및 RHCM 기술이 7인치 도광판 마이크로 패턴 전사성에 미치는 영향에 대한 실험적 연구 (An Experimental Study on the Replication Ratio of Micro Patterns of 7 inch LGP using Injection/Compression and RHCM)

  • 조성우;김종선;황철진;윤경환;강정진
    • 소성∙가공
    • /
    • 제20권1호
    • /
    • pp.11-16
    • /
    • 2011
  • Recently, according to the rapid development of display, many display applications, such as, cellular phone, navigation, monitor and LCD TV have been changed from CRT type to LCD type. BLU(Back Light Unit) is one of main parts in LCD unit and generally, it consists of a light source, a reflective sheet, a LGP(Light Guide Plate), a diffuser sheet, and two prism sheets. The most important component of BLU is a light guide plate, which diffuses the input light to the TFT-LCD module uniformly. The LGP is usually made by injection molding process, and it has numerous optical micro patterns on the surface. In the present study the micro-patterned stamper which has cylindrical shape was fabricated by using the UV-LiGA process. And the replication characteristics have been compared among three different kinds of injection molding process; general injection molding, injection/compression molding and RHCM(Rapid Heating and Cooling Molding). Average replication ratios of CIM and ICM were 19.1% and 64.6%, respectively. On the other hand, the average replication ratio of RHCM process showed the higher value of 98.4% among these. It show that maintaining the mold surface above $T_g$ could increase the replication ratio of micro patterns substantially.