• Tribology and Lubricants
• /
• v.16 no.5
• /
• pp.317-323
• /
• 2000

The film thickness and shape of elastohydrodynamic lubrication is measured by optical interferometer, which is the most precise method for EHL film measurement. However, the interpretation of the image pattern from optical viscometer is not simple for two-dimensional shape. A newly developed method of image processing makes it possible to evaluate the film thickness and shape in every point of contact region with two dimensional aspects. In this study, we captured the film shape of EHL film by the monochromatic incident light and analyzed the film thickness with the image processing method, which uses phase shift method. From the values of intensity in fringes, the qualitative feature of film thickness in the contact area are obtained by using Zernike polynomial

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.821-832
• /
• 2002

The purpose of this study was to develop grading method of the basic brassiere patterns therewith, provide for 12 size's brassiere patterns and prove fitness of their's and shape. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. The basic sizes adopted at the first design stage (see fig.1-2) were 75AA, 75A and 75B each of which was designed as upper foundation basic pattern in reference to the cup size. At the second stage, each of the upper body foundation basic pattern was used to design lower cup, upper up, front panel and wing in their order(see fig.3-6). At the third stage, the other sizes were graded in reference to the three brassiere patterns (75AA, 75A and 75B) to produce 12 brassiere sizes(see Tab. 7-8). In order to develop the basic patterns of adult women's brassieres, 33 women were selected per 11 size combination(3 women per size combination), and then, their brassiere fitting was teated. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cup's bottom line or lower cup's top line, poor shape of upper cup's outside top line and shoulder strip position. On the other hand, on the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps'interval did not befit the ful1-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were addressed for the second teat. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. We were to present the final brassiere sizing system to extend the interior length of breast and the exterior length of breast on the basis of fitting test. Thereby, 75B$.$80A$.$80B$.$85A$.$85B's the interior lengths of breast were enlarged to 0.7cm, the rest size was enlarged to 0.5cm and the exterior length of breast was enlarged to 0.5cm regardless of sizes. 3. The upper foundation basic patterns of 75AA and 75B were presented and and the basic brassiere pattern and grading pattern were presented through to.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.39-42
• /
• 2000

Motion estimation plays an important role for video coding. In this paper, we derive optimal search patterns for fast block matching motion estimation. By analyzing the block matching algorithm as a function of block shape and size, we can find an optimal search pattern for initial motion estimation. The proposed idea, which has been verified experimentally by computer simulations, can provide an analytical basis for the current MPEG-2 proposals. In order to choose a more compact search pattern for BMA, we exploit the statistical relationship between the motion and the frame difference of each block.

• Laser Solutions
• /
• v.1 no.1
• /
• pp.39-44
• /
• 1998

Laser ablation system for microscopic defect in thin film pattern was developed in this study. For the varification of this study, several laser ablation tests were accomplished. The ablated shape of thin film and the surface of base glass were analyzed by use of microscopic tools and EPMA. After some tests of thin film, the specification of laser and optical unit(max. laser energy is 25mJ, wavelength is 532nm, Q-switched Nd-YAG laser, frequency is 20Hz, Auto-focus unit is LD type.)

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.1
• /
• pp.1-6
• /
• 2004

In this paper, we present the new method for joint aspect inspecting system. We use the image processing and laser maker for light source. We can find the matrial joint status through processing the line pattern which is made by laser maker. To get the line pattern, in first, we did the preprocess of threshold. If the shape of line had over two segments, then the joint status is abnormal. We show our system efficency by experiment on tire facility.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.23
• /
• pp.65-77
• /
• 2007

This study is about the survey technique and the development of measuring method about a wooden pattern of the small vessel made by CNC Machine. we will propose a survey method about processing grade, objectivity of survey, an external shape and a surface defect survey method, Furthermore, CMM(Coordinate Measuring Machine) and OMM(On Machine Measurement).

• Journal of the Korean Society of Safety
• /
• v.2 no.3
• /
• pp.37-43
• /
• 1987

The combustion process in gas turbine combustor mainly influenced by flow pattern in combustor, and especially the flow pattern near the nozzle and the shape of recirculation zone affect strongly on the flame stabilization, temperature distribution and combustion efficiency in combustor. In this paper, the author has designed and manufactured transparent simplified model combustors on the basis of K. Suzuki's combustor design method to investigate the effects of swirl number and secondary air hold arrays in axial position on the flow characteristics by adopting the tuft method and 5 hole pitot tube.

• Korean Journal of Environment and Ecology
• /
• v.17 no.1
• /
• pp.56-70
• /
• 2003

Reviewing the trend of land use in urban cultivated land, the large part of land has been changed into the high-profit cultivated land of green houses or the developing areas. So, its percent of cultivated land in land use comparing to the other types of cultivated land would get far higher. Therefore, this study aims to identify the characteristics of landscape ecological pattern in the cultivated land of green houses and to find its alternatives for management, which would be a basis of regional planning and management in terms of space and time. The cultivated land of green houses, whose its area reaches 19.3ha, in Seoul are mainly dispersed on the south eastern part of Seoul and its area is larger than the other types of cultivated lands. According to the result of shape index analysis, its perimeters were very simple. Also, Analyzing the first three major neighboring land use to the cultivated land of green houses, the most frequent biotope types of neighboring land use to the cultivated land of green houses were that transportation facility represented 60%, forest, 43%, the other types of cultivated land, 36%, and residential area, 33%. The cause why the percent of transportation facility was higher in the neigh-boring land use types was assumed for the production and distribution of crops. On the basis of the result of landscape ecological pattern analysis, the cultivated land would be managed and contributed to enhance biodiversity and urban environment preservation.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.3
• /
• pp.390-400
• /
• 2010

This study is aimed to test physiological and hematological actions of Rheum palmatum through clinical pilot study optimized for usual oriental medicine prescription. Thirty-one cases were finally collected and the sample extract 100 $m{\ell}$ of Rheum palmatum (ERP) was administered two times in a day during 3 days and checked with blood CBC test, urinalysis, liver function test, abdominal X-ray as well as general diagnostic process of oriental medicine; pattern identification, assessment of shapes and constitution. The total toxic effective rate of ERP was 9.68% in 3 cases of the whole in case of consistent uneasy state in the subjective symptomatic assessment and aggravation of blood and urine examination. The relevant diagnostic factors were so-eum constitution and essence type subject, carapaces species, lung type in the aspect of Jisan shape theory. On the other hand, the positive effective rate of ERP was 29.03% manifesting improvement of vital signs or present illness and no abnormal changes of blood chemistry and urinalysis and simple abdomen radiology. The relevant diagnostic factors were tae-eum constitution, energy type subject, aves species, heart and liver type in Jisan's shape theory. And the other cases were manifesting no specific change through the administration of ERP. The ratio of the numbers of decrease and increase was 44:5 in the tenderness and hardness of abdominal palpation. But if the pattern identification doesn't comply with the aim of rhubarb application despite of constipation and abdominal pain, the tendeness and biochemical report was shown in abnormal change. The mean number of diarrhea by ERP was $16.77{\pm}6.95$ during 3 days after administration, and the frequent areas of abdominal pain were lower>middle>upper in order, and it meant the target site of ERP too. Besides, the toxic reaction against ERP was expressed highly in case of decrease in blood cell count and hemoglobin, hematocrit having blood deficiency syndrome. Likewise, the toxicity of ERP was influenced by pattern identification manifesting present disease condition and diagnostic factors of four constitutions, Jisan's shape theory collaterally. In conclusion, evaluation of herbal toxicity in order for using as a clinical guideline, various diagnostic pattern information and shape features like the above should be studied together with other pharmacologic toxicology test for the future.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.4
• /
• pp.137-144
• /
• 2019

The purpose of this study was to provide basic data for the development of a prototype of a garment that allows middle aged men to look idealized by examining the type of perception of middle aged men based on their subjective evaluation and their characteristics. This study used the Q methodology, which is a subjective research method that finds correlations among middle aged men across subjective attributes. The types of perception of body shape of middle aged men were analyzed as three types: leaning forward shape with bird legs, developed upper body shape with thick legs, protruding abdomen obesity body shape. The leaning forward shape with bird legs was recognized as the lowest in the BMI index, and the shoulder and chest were sagging, legs were thinner than the body and leaned forward. And that the hip were protruding and had a flat rectangular shape. Developed upper body shape with thick legs was the second overweight type of BMI index. It was recognized that the ankle and calf thighs were thick and the upper abdomen protruded upper body development body. Protruding abdomen obesity body shape was the most obese type with BMI index. In this type, the height was the smallest, and the upper abdomen came out and the abdomen protruded, and the abdomen was more exuded than the chest, and the neck was thick and the hips were recognized as the big body. The middle aged men's recognitive body shape was classified as a similar to actual body shape. However, in the recognition type, the frontal and side body types were mixed and classified. It is necessary to study the ergonomic pattern considering the features of each body type. This suggests that psychological effects can be obtained that allow the body shape that changes with age to be accepted more positively.