• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.883-898
• /
• 1996

In this paper, we propose improved method to recognize the shape for enhancing the quality of the pattern recognition system by compressing the source images. In the proposed method, we reduced the data amount by skeletonizing the source images using mathematical morphology, and then matched patterns after accomplishing the translation and scale normalization, and rotation invariance on the transformed images. Through the scale normalization, it was possible for the shape recognition at minimum amount of the pixel by giving the weight to the skeleton pixel. As the source images was replaced by the skeleton images, it was possible to reduce the amount of data and computational loads dramatically, and so become much faster even with a smaller memory capacity. Through the experiment, we investigated the optimum scale factor and good result was proved when realizing the pattern recognition system.

• Korean Journal of Human Ecology
• /
• v.14 no.3
• /
• pp.475-483
• /
• 2005

The ready-made clothes for obese women are not manufactured systematically due to the diversity and scarcity of their body shape. In this study, we first analyzed and classified 104 obese women's body shape to select four representative subjects. Then, the four subjects participated in wearing test to evaluate the performance of the jacket patterns which are available in the market and widely-used at the same time. The characteristics of the jacket patterns for obese women were also investigated. As to the highly rated jacket in terms of body motion, it was found that difference between the breast width to axilla and the breadth to anterior midaxilla is larger than the other jackets, and the breast width of front body is wider than what of back width. It was noted, however, that the armhole depth and the width of obese women' jackets should not be determined indirectly by the magnitude of the girth around bust, waist or hip as in the case of regular sized women's. It is because body proportion of obese women is different from that of standard sized women.

• Microbiology and Biotechnology Letters
• /
• v.25 no.2
• /
• pp.159-165
• /
• 1997

We collected 3,237 plant samples, mainly leaves of various trees, from many provinces in Korea and a total of 1,925 Bacillus thuringiensis isolates were obtained and characterized. The isolates were characterized in terms of crystal morphology, PAGE pattern of the toxin proteins, plasmids pattern, biochemical characteristics, and bioassay. The microscopic observation showed that 49.1% of the isolates have bipyramidal shape crystals, 7.1% of spherical shape crystals, 1.4% of rhomboidal shape crystals, and others have small or amorphous inclusions. The insecticidal activities of the spore-crystal mixtures of isolates were tested against Plutella xylostella, Bombyx mori, Culex pipiens, and Agelastica coerulea. Bioassay showed that 51.3% of the isolates were shown to be active; lepidopteran-specific (44.8%), dipteran-specific(4.9%) and coleopteran-specific (1.6%). The remainder(48.8%) did not show any activity against the insects we tested. Interestingly though, some of these non-active isolates were shown to have bipyramidal crystals. By serotyping 22 isolates of our collection, we found that there are various kind of subspecies such as aizawai, amagiens, canadensis, darmstadiensis, galleriae, finitimus, kurstaki, morrisoni and neoleonensis, and three isolates have been classified into a new serotype, H49, and one of them, the type strain, named subsp. muju. From this study it was found that phylloplane is a good source for the isolation of Bacillius thuringiensis, and Bacillus thuringiensis is distributed widely in Korea.

• Fashion & Textile Research Journal
• /
• v.8 no.6
• /
• pp.627-633
• /
• 2006

This study examined the kinds, expression, techniques and arrangement of patterns for the traditional women's costume from 1995 to 2002 in North Korea. And the results were compared with South Korean. Conclusions are as follows : In the kinds of patterns the natural plant patterns were much more frequently used in North Korea. These tendency was same to South Korea. And the geometric patterns were more frequently used in South Korea. According to frequency in the expression of patterns, it was the realistic, geometric, stylized shape in North Korea. To the contrary it was the stylized, geometric, realistic shape in South Korea. In terms of decorative techniques, not only the traditional embroidery, gold leaf, multicolored stripes, but also modern collages, painting, beads, applique, flounce, ruffle were used in North Korea. Modern techniques were found comparatively a lot in North Korea, traditional techniques were found comparatively a lot in South Korea. In terms of arrangement of patterns, the modern arrangement was much more frequently used. And localized type of modern arrangement was found comparatively a lot in South and North Korea. Therefore traditional beauty was generally expressed by natural patterns, realistic shape and modern beauty was generally expressed by modern techniques and arrangement of patterns in North Korea.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.857-862
• /
• 2007

In this paper, we studied about the antenna designed by heart-shape beam pattern for 4G mobile communication applications. The proposed whole size of structure was identical if it compare with the basis structure. But size of the patch was improved a little(upaward 1.3). The impedance bandwidth was improved about 258% which compares with the basis structure. And the structure could get very good characteristic applicatory to IMT-Advanced. Impedance bandwidth of antenna was about 22%(870MHz). The gain of above 8.7dBi was achieved extended IMT-Advanced all frequency band.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.2
• /
• pp.166-171
• /
• 2017

This study analyzes the effect of anodizing conditions on nanopore formation on a cylindrical aluminum roll. In general, a nanopore is formed at the center of a concave base-pattern. Occasionally, multiple nanopores are formed on a single base-pattern. However, to control the diameter and interpore distance precisely, single nanopores are required. In this study, the ratio of the number of single nanopores to the total number of nanopores was investigated by varying anodizing conditions such as electrode area, electrolyte concentration, and rotation speed of the roll mold. The areal ratio of the counter-electrode to the working electrode (aluminum), electrolyte concentration, and the roll-mold rotation speed were varied from 0.4% to 42%, 0.07 M to 0.3 M, and 5 rpm to 75 rpm, respectively. The experimental results showed that the single-nanopore ratio increased with increasing counter-electrode area and electrolyte concentration. However, the rotation speed had no significant effect on nanopore shape.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.63-66
• /
• 2005

Nanoimprint lithography (NIL) process at room temperature has been newly proposed in recent years to overcome the shape accuracy and sticking problem induced in a conventional NIL process. Success of the room temperature NIL relies on the accurate understand of the mechanical behavior of the polymer. Since a conventional NIL process has to heat a polymer above the glass transition temperature to deform the physical shape of the polymer with a mold pattern, viscoelastic property of polymer have major effect on the NIL process. However, rate dependent behavior of polymer is important in the room temperature NIL process because a mold with engraved patterns is rapidly pressed onto a substrate coated with the polymer by the hydraulic equipment. In this paper, finite element analysis of the room temperature NIL process is performed with considering the strain rate dependent behavior of the polymer. The analyses with the variation of imprinting speed and imprinting pattern are carried out in order to investigate the effect of such process parameters on the room temperature NIL process. The analyses results show that the deformed shape and imprint force is quite different with the variation of punch speed because the dynamic behavior of the polymer is considered with the rate dependent plasticity model. The results provide a guideline for the determination of process conditions in the room temperature NIL process.

• Journal of Theoretical and Applied Mechanics
• /
• v.2 no.1
• /
• pp.51-70
• /
• 1996

This study is generalization of the study of Miles[Physica 11D, 1984, pp.309-323]on the resonant motion of a spherical pendulum, which is equivalent to a particle on a spherical container subject to a linear, horizontal excitation. This study covers an arbitrary shape of container and a more general excitation (horizontal but elliptic motion). The averaging method is applied to reduce the governing equations to an autonomous system with cubic nonlinear terms, under the assumption of small amplitude of the container motion. It is shown that both the container shape and the excitation pattern affect the particle dynamics. Under the linear excitation, the anharmonic motion of the particle is possible only for a certain finite range of the parameter a controling the container shape. Stability of the particle's harmonic motion is also influenced by the excitation pattern; as the excitation trajectory becomes closer to a circle, the particle's motion has a stronger tendency to become stable and to follow the rotational direction of the excitation. Under a circular excitation, the motion is always stable and circular with the same rotational direction as the excitation. Analogy between the present model and that of the surface wave inside a circular is studied quantitatively.

• Korean Institute of Interior Design Journal
• /
• no.30
• /
• pp.68-77
• /
• 2002

From ancient to modern architecture, the light in the architecture spaces as the only changing factor, was the most important theme contributing vitality to the space and judging its character and expression. The efforts, to acquire both natural-physical light and internally experienced spiritual-supernatural light, had been revealed in several ways of the architecture from the ancient architecture. It was the main issues on the christian architecture. In this study, 1 have intended to determine how the light, the most important factor on the christian architecture symbolizing the blessing of God and forming the pious and restrained spaces has been expressed in the church spaces. For this purpose, I have compared and analysised the examples of the using the light, to the arts of the modern maestros of architecture and newly constructed churches in Korea on the way of light input pattern by the shape of windows. The results from the examples show that the most outstanding point of the modern christian architecture compare to the past, is that the natures of the inputted light has many diversities by the architects. And I reached the fact that the constructers by their own will to acquire the intended light, they are chose progressive light expressing methods through the shape of windows.

• Journal of Species Research
• /
• v.9 no.2
• /
• pp.147-161
• /
• 2020

Seven new species of two genera Scalarispongia and Smenospongia (Demospongiae: Dictyoceratida: Thorectidae) are described from Gageo Island and Jeju Island, Korea. Five new species of Scalarispongia are compared to nine reported species of the genus by the skeletal structure. Scalarispongia viridis n. sp. has regular ladder-like skeletal pattern arranged throughout the sponge body and has pseudo-tertiary fibres. Scalarispongia favus n. sp. is characterized by the honeycomb shape of the surface and is similar to Sc. flava in skeletal structure, but differs in sponge shape. Scalarispongia lenis n. sp. is similar to Sc. regularis in skeletal structure but has fibers that are smaller in size. Scalarispongia canus n. sp. has irregular skeletal structure in three dimensions and ladder-like which comes out of the surface and choanosome. Scalarispongia subjiensis n. sp. has pseudo-tertiary fibres and its regular ladder-like skeletal pattern occurs at the choanosome. Two new species of Smenospongia are distinguished from the other 19 reported species of the genus by the skeletal structure. Smenospongia aspera n. sp. is similar to Sm. coreana in sponge shape but new species has rarely secondary web and thin and thick bridged fibres at near surface. Smenospongia mureungensis n. sp. has very simple skeletal structure.