• Tunnel and Underground Space
• /
• v.21 no.2
• /
• pp.128-137
• /
• 2011

The shut-in pressure calculated in common hydrofracturing test for vertical borehole equals generally to the minimum horizontal principal stress, so it should be considered as an essential parameter for determining the in-situ stress regime around the rock mass. It shows usually an ambiguous value in pressure-time history curves, however, because of the relationship between the behavior of hydraulic fractures and the condition of remote stress regime. In this study, a series of numerical analyses have been carried out to compare several methods for determining the shut-in pressure during hydrofracturing. The hydraulic-mechanical coupling has been applied to numerical analysis for simulating the fracture propagation by hydraulic pressure, and the different discontinuity geometry has been considered in numerical models to examine the effect of numerical element shape on fracture propagation pattern. From the numerical simulations with the four different discontinuity geometries, it was revealed that the shut-in pressure obtained from graphical methods rather than statistical method was relatively small. Consequently a care should be taken in selecting a method for determining the shut-in pressure when a stress anomaly around borehole and a fracture propagation with complicate mechanism are considered.

• Conservation Science in Museum
• /
• v.2
• /
• pp.27-34
• /
• 2000

24 wooden objects excavated from Daho-ri were identified into 8 categories such as Quercus spp. (37.7%), Castanea crenata (8.3%), Prunus (8.3%), Ilex (4.1%), Alnus spp. (25%), Prunus spp. (4.1%), Zelkova serrata (4.1%) and Fraxinuse (8.3%). Physical properties of the above high water content, high contraction rate and significant density reduction. As for degradation pattern, observation with polarizing microscope showed significant decrease of double reflection phenomenon in most of the excavated objects excluding vessel compared to other kinds of objects, and observation with SEM showed remarkable degradation of organization structure including the 2nd cell wall of wood. Reagent can be easily penetrated and diffused into the objects with high degradation rate, so it's beneficial to treat them with polymers such as PEG#4000(MW:3,350), but in order to prevent contraction and change in shape, high concentration of Reagent is required in treatment to hold wood organization structure.

• Journal of Korea Water Resources Association
• /
• v.53 no.4
• /
• pp.237-247
• /
• 2020

The purpose of this study is to analyze whether design rainfall and hyetograph, which are the main elements of design rainfall, can properly reflect the those of observed rainfalls through inundated rainfall events. The target areas were selected at seven large cities with high damages regarding to the flooding. Comparative analysis between probability and observed rainfall shows that 57% of the cases, in which rainfall amount through the IDF curve is estimated lower than the observed rainfall, do not properly reflect the observed rainfalls. In particular, this trend is exacerbated by the cases in low return period and the rain type of typhoon or frontal rain. The comparative results of rainfall intensity formula showed that the Talbot and Japanese formula were stable in the short- and long-term return periods, respectively. The comparison of hyetograph results also showed that the Mononobe method properly reflects the maximum rainfall intensity and the Huff method properly reflects the shape of rainfall pattern.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1202-1205
• /
• 2005

This paper describes a method for vision-based person identification that can detect, track, and recognize person from video using multiple cues: height and dressing colors. The method does not require constrained target's pose or fully frontal face image to identify the person. First, the system, which is connected to a pan-tilt-zoom camera, detects target using motion detection and human cardboard model. The system keeps tracking the moving target while it is trying to identify whether it is a human and identify who it is among the registered persons in the database. To segment the moving target from the background scene, we employ a version of background subtraction technique and some spatial filtering. Once the target is segmented, we then align the target with the generic human cardboard model to verify whether the detected target is a human. If the target is identified as a human, the card board model is also used to segment the body parts to obtain some salient features such as head, torso, and legs. The whole body silhouette is also analyzed to obtain the target's shape information such as height and slimness. We then use these multiple cues (at present, we uses shirt color, trousers color, and body height) to recognize the target using a supervised self-organization process. We preliminary tested the system on a set of 5 subjects with multiple clothes. The recognition rate is 100% if the person is wearing the clothes that were learned before. In case a person wears new dresses the system fail to identify. This means height is not enough to classify persons. We plan to extend the work by adding more cues such as skin color, and face recognition by utilizing the zoom capability of the camera to obtain high resolution view of face; then, evaluate the system with more subjects.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.2
• /
• pp.122-127
• /
• 2001

The high stability of the interference pattern is very important in the case of measuring interference when a phase noise like a vibration occurs in the measuring environment. In this paper, we proposed the method of phase noise filtering by BaTiO$_3$ with the characteristic of SPPCM. Also, a beam with a shape of an ellipse was incident into BaTiO$_3$ by using the tilted lens so as to improve the reflectivity and the response time. And we confirmed the result by optical experiment.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.587-592
• /
• 1995

The purpose of this study was to observe the pattern of bone remodellings in the periodontal ligament of dog, in which experimental tooth movement was performed A control and 5 experimental dogs, one and half year in age, were studied. Light force (50-75g) was applied by placing open-coil spring between left mandibular premolars ; heavy force (250-300g), between right mandibular premolars. Experimental dogs were sacrificed at 12 hours, 1, 3 ,7 and 14 days after force application, respectively. And soft X-ray films were obtained and read on the sectioned periodontal tissue around mandibular premolars. The results were as follows. 1. New bone formation began to be observed in tension side at 7-day and increased at 14-day , No difference was observed between light force group and heavy force group. 2. Bone resorption was observed as a shape of destruction of lamina dura at 3-day and increased gradually at 7-day, 14-day.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.3
• /
• pp.118-125
• /
• 2004

The purpose of this study is to decide an appropriate neighborhood and a transition rule of cellular automata by analyzing the past growth process of urban areas in Gimhae. With cellular automata which can manage the change based on the dynamic model and time, this study analyzes the urban growth of Gimhae from 1987 to 2001. Also, through the simulation of different types for neighborhood and transition rules, we can find the appropriate neighborhood and the transition rule for Gimhae. In conclusion, the forecast of physical urban growth pattern is more accurate under conditions when the number of matrixes for the neighborhood is small, the shape of the neighborhood is rectangular, "${\alpha}$" value, which control the pace of urban growth, is low and the transition possibility ($P_{ij}$) is high.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.11-14
• /
• 2009

The implementation of gelled propellants systems offers high performance, thrust-control, energy management of propulsion, storability, and high density impulse of solid propulsion. Present study focused on the spray behavior of liquid sheets formed by impinging jets of non-Newtonian liquids which are mixed by Carbopol 941 0.5%wt. The results are then compared with experiments conducted on spray images formed by impinging jets concerning with air-blast effect at center orifice. When gel propellants are injected by doublet impinging jets at low pressure, closed rim pattern shape appeared. As increasing air mass flow rate(decreasing GLR), spray breakup and atomization phenomenon better improved and spray structure instabilities for the effect of air-blast are also increased.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.1
• /
• pp.33-40
• /
• 1992

Several etching phenomena were observed and analyzed in diaphragm process performed on 4-inch (100) Si wafers for sensor application. In case of deep etching to above 300$\mu$m depth, the etch-defects appeared at etched surface could be classified into three categories such as hillocks, reaction products, and white residues. It was known that the hillock had a pyramidal shape or trapizoidal hexahedron structure depending on the density and size of the reaction products. The IR spectra showed that the white residue, which was due to the local over-saturation of Si dissolved in solution, was mostly Si-N-O compounds mixed with a small amount of H and C etc. Also, the difference in both the existence of etch-defects and etch rate distribution over a whole wafer was investigated when the etched surfaces were downward, upward horizontally and erective in etching solutions. The obtained data were analyzed through flow pattern in the etching bath. As the results, the downward and erective postures were favorable in the etch rate uniformity and the etch-defect removal, respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.1
• /
• pp.5-11
• /
• 2001

Melting behavior and bridge phenomenon of solder paste, which is essential for surface mount technology in pachaging, were investigated. Solder paste of Sn-37%Pb was printed on Cu-pattern of PCB, and heated over melting point. Melting behavior of the paste was observed using CCD-camera. In order to modelize the melting and agglomeration phenomena of paste, two solder balls of 0.76 mm diameter were used. As experimental results, the paste start to melt from the margin of the printed shape. The height of the melted paste decreased from 270 $\mu\textrm{m}$ to 200 $\mu\textrm{m}$ firstly, and finally recovered to 250 $\mu\textrm{m}$ During the melting procedure, pores were evolved from the molted paste. Concerning melting model of solder ball, relationship between contact area of solder ball and soldering time was derived as $\chi^2/t=4r \; \gamma/\eta=7.56 m^2$/s at $280^{\circ}C$.