• Progress in Medical Physics
• /
• v.15 no.2
• /
• pp.84-93
• /
• 2004

Stereotactic radiosurgery (SRS) is a technique that delivers a high dose to a target legion and a low dose to a critical organ through only one or a few irradiations. For this purpose, many mathematical methods for optimization have been proposed. There are some limitations to using these methods: the long calculation time and difficulty in finding a unique solution due to different tumor shapes. In this study, many clinical target shapes were examined to find a typical pattern of tumor shapes from which some possible ideal geometrical shapes, such as spheres, cylinders, cones or a combination, are assumed to approximate real tumor shapes. Using the arrangement of multiple isocenters, optimum variables, such as isocenter positions or collimator size, were determined. A database was formed from these results. The optimization procedure consisted of the following steps: Any shape of tumor was first assumed to an ideal model through a geometry comparison algorithm, then optimum variables for ideal geometry chosen from the predetermined database, followed by a final adjustment of the optimum parameters using the real tumor shape. Although the result of applying the database to other patients was not superior to the result of optimization in each case, it can be acceptable as a plan starling point.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.840-857
• /
• 2017

In 1995, the costumes were restored in an unknown woman's tomb at the Jeonju Lee's family cemetery in Gapyeong, Gyeonggi-Do, and there are currently nine items remaining. In this study, we first introduced these 9 relics to academia and analyzed the morphological characteristics of the costumes. We also estimated the time and person of burial compared with costumes unearthed from other burials. Jeogories (short jacket) are all four items. One of these items was unusual in shape, and the upper part of the seop (gusset) was wrinkled and shaped. This type of Jeogori appears only till the 1520s in other tombs. There are also two skirts, one of which is characterized by a superimposed pattern. The top and bottom / middle part of the skirt were rolled up, and the skirt, which was double-rolled up in this way, was first discovered. An analysis of the shape of Jeogori and skirt indicated that the person buried in the Jeonju Lee's family tomb was believed to have survived until the early 16th century. Based on these estimated periods, as a result of looking at the genealogy of Jeonju Lee's family, it was concluded that the tomb was probably a woman named Lee Geum Myeong (李金命) born in the mid-15C and died between the late 15C and the early 16C.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1585-1593
• /
• 2015

3D-structured (embossed) aluminum sheets have been used in the heat insulation purpose for automative exhaust parts because of increasing their surface areas and stiffness reinforcement imposed in making the embossing pattern. However, there are many restrictions in press forming of the embossed sheet compared with the flat sheet (non-embossed one) because of its difference in the mechanical properties and the geometrical 3-dimensional shape. In this paper we investigated the deformation characteristic of embossed aluminum sheet in the incremental sheet forming process which has frequently used in the design verification and the trial manufacturing of sheet products. The single point incremental forming (SPIF) experiments for the rectangular cone forming using the CNC machine with a chemical wood-machined die and a circular tool shape showed that the formability of the embossed sheet are better than that of the flat sheet in view of the maximum angle of cone forming. This comes from the fact that the embossed sheet between the tool and the elastic die wall is plastically compressed and the flatted area contributes to increase the plastic deformation. Also the tool path along the outward movement from the center showed a better formability than that of the inward movement from the edge. However the surface quality for the tool path along the outward movement evaluated from the surface deflection is inferior than that of the tool path along the inward movement.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.3
• /
• pp.289-297
• /
• 2017

Local and general factors have been attributed to root resorption occurred by injuries such as trauma and dental caries that affect periodontal ligament or dental pulp tissue. Pathologic root resorption is different from physiologic root resorption in terms of resorption pattern such as micromorphology of resorption fossae and types of observed cells. Microscopic morphologies and histologic features of physiologic and pathologic root resorption surface of maxillary primary central incisors resulting from trauma and periapical inflammation were observed by scanning electron microscope and light microscope. The morphology of physiologic resorption lacunae was small and oval or circular shape with regularities. The morphology of pathologic resorption lacunae was large and polygonal shape with irregularities compared with the physiologic resorption lacunae. Multinucleated giant cells and mononuclear cells were closely attached to the physiologic and pathologic resorption lacunae, whereas several kinds of mesenchymal cells with numerous inflammatory cells were found in the areas adjacent to the pathologic resorption surface. Compensating cementum formation took place along some of the areas of physiologic and pathologic resorption area resulting from trauma, but could not be observed on pathologic resorption area resulting from periapical inflammation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.6
• /
• pp.97-109
• /
• 2008

This study first attempted to catch the transformational affairs and motives of the representative pavilion, Hanbyeok in Honam after its construction. Especially, it re-illuminated the morphologic, significant and functional change process of a pavilion after the early Joseon Dynasty by taking the local scenery, Hanbyeokdang as a sample, and considering the space and scenic characteristics, and diachronically understood its creation process and rebuilt its inherent positional meaning to reach the following conclusion. 1. Weoldanglu, at its early foundation, seems to have stressed the function of a private banquet and lecture hall to train younger students, and served as a reception space. Then the reception function gradually increased, and up to before 1530, it seems to have been called Weoldanglu(月塘樓) or Weoldangwon(月塘院). 2. In 1619, Governor Yoo Saek changed the pavilion name to Hanbyeokdang through the subject of a poem. 200 years after Weoldang's death, it became a public space called Hanbyeokdang, an amusement place in which scholars cultivated great morale, and participated in the sending-off and welcoming of predecessors and successors. This seems to have taken a foothold as a public event or entertainment space for the local administration, Jeonjuboo(全州府) through the remodeling process sponsored by the public. 3. Scenic language such as its indicating name, expression type and surrounding view through old map and so on, the shape of Hanbyeokdang evolved and changed to diverse types after the foundation of Weoldanglu, at the heart of which Hanbyeokdang with its two legs standing at a rock was located. 4. During the late 18th century, Hanbyeokdang seems to have been a wing corridor connected closely to the left corridor of the Jeonju stream bed, whose pattern is presumed to have existed even during the early 19308. Such changes in scenic language make us assume that diverse auxiliary space, a wing corridor, was erected for use as a public banquet and amusement spot of Jeonjuboo Castle, the inherent function of Hanbyeokdang after the mid 18th century. 5. Penetration of Hanbyeokgool and the erection of Hanbyeokgyo caused the change of the ancient shape of Hanbyeokdang. Specifically, a great Hanbyeokgyo passing by the pavilion changed the relative scale, so the pavilion image of pursuing unity with nature has lost the old inherent refinement and visual character.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.454-454
• /
• 2014

Silicon microwire array is one of the promising platforms as a means for developing highly efficient solar cells thanks to the enhanced light trapping efficiency. Among the various fabrication methods of microstructures, deep reactive ion etching (DRIE) process has been extensively used in fabrication of high aspect ratio microwire arrays. In this presentation, we show precisely controlled Si microwire arrays by tuning the DRIE process conditions. A periodic microdisk arrays were patterned on 4-inch Si wafer (p-type, $1{\sim}10{\Omega}cm$) using photolithography. After developing the pattern, 150-nm-thick Al was deposited and lifted-off to leave Al microdisk arrays on the starting Si wafer. Periodic Al microdisk arrays (diameter of $2{\mu}m$ and periodic distance of $2{\mu}m$) were used as an etch mask. A DRIE process (Tegal 200) is used for anisotropic deep silicon etching at room temperature. During the process, $SF_6$ and $C_4F_8$ gases were used for the etching and surface passivation, respectively. The length and shape of microwire arrays were controlled by etching time and $SF_6/C_4F_8$ ratio. By adjusting $SF_6/C_4F_8$ gas ratio, the shape of Si microwire can be controlled, resulting in the formation of tapered or vertical microwires. After DRIE process, the residual polymer and etching damage on the surface of the microwires were removed using piranha solution ($H_2SO_4:H_2O_2=4:1$) followed by thermal oxidation ($900^{\circ}C$, 40 min). The oxide layer formed through the thermal oxidation was etched by diluted hydrofluoric acid (1 wt% HF). The surface morphology of a Si microwire arrays was characterized by field-emission scanning electron microscopy (FE-SEM, Hitachi S-4800). Optical reflection measurements were performed over 300~1100 nm wavelengths using a UV-Vis/NIR spectrophotometer (Cary 5000, Agilent) in which a 60 mm integrating sphere (Labsphere) is equipped to account for total light (diffuse and specular) reflected from the samples. The total reflection by the microwire arrays sample was reduced from 20 % to 10 % of the incident light over the visible region when the length of the microwire was increased from $10{\mu}m$ to $30{\mu}m$.

• Applied Microscopy
• /
• v.36 no.3
• /
• pp.227-234
• /
• 2006

To investigate the comparative effect of spherical and aspherical RGP lens were worn during 3 weeks on rabbit's cornea. Four white rabbits were worn right eyes with spherical lens and 4 white rabbits were worn right eyes with aspherical RGP lens. Left eyes were served as control. The rabbits were sacrificed at 3 weeks after fitting and observed morphological changes by scanning electron microscopy and also investigate proliferation rate of the corneal epithelium with RGP wearing. After spherical RGP lens wearing, the epithet layer damaged compared to aspherical lens. The superficial cell layer strip off seriously, cell size significantly changed abnormal. Both spherical and aspherical RGP lens fitting group showed so many bacteria and back surface of lens was found like a fern shape. The aspherical RGP lens original material type was some formal than spherical lens. We thought that these pattern was significantly altered with spherical lens by prohibited transmitter oxygen from atmosphere therefore the epithelium shape was changed. This suggested wearing the aspherical lens might be less physiologic than shperical lens fitting.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.173-176
• /
• 2001

In this thesis, a new measurement system is implemented for depth data extraction based on the camera calibration of the known pattern. The relation between 3D world coordinate and 2D image coordinate is analyzed. A new camera calibration algorithm is established from the analysis and then, the internal variables and external variables of the CCD camera are obtained. Suppose that the measurement plane is horizontal plane, from the 2D plane equation and coordinate transformation equation the approximation values corresponding minimum values using Newton-Rabbson method is obtained and they are stored into the look-up table for real time processing . A slit laser light is projected onto the object, and a 2D image obtained on the x-z plane in the measurement system. A 3D shape image can be obtained as the 2D (x-z)images are continuously acquired, during the object is moving to the y direction. The 3D shape images are displayed on computer monitor by use of OpenGL software. In a measuremental result, we found that the resolution of pixels have $\pm$ 1% of error in depth data. It seems that the error components are due to the vibration of mechanic and optical system. We expect that the measurement system need some of mechanic stability and precision optical system in order to improve the system.

• Korean Journal of Veterinary Research
• /
• v.37 no.1
• /
• pp.87-101
• /
• 1997

The development of trachea in fetuses on 60, 90 and 120 days of gestation and neonates of Korean native goats was investigated by microscopy and scanning and transmission electron microscopy. The results were summarized as follows; Light microscopic studies: 1. In the 60-day-old fetuses, the tracheal walls were differentiated and divided into four layers of the mucosa, submucosa, muscle and cartilage, and adventitia. The tracheal epithelium is composed of stratified ciliated columnar epithelium at 60- and 90-day-old fetuses while the epithelium observed at 120-day-old fetuses was pseudostraified ciliated colummar epithelium. 2. In the 90-day-old fetuses, tracheal glands extended into the submucosa and peripheral area of the tracheal cartilage. The blood vessels were observed in the submucosa and adventitia. The elastic and collagenous fibers were observed in the tracheal walls. 3. In the neonates, the tracheal walls consisted of mucosa with well-developed folds, submucosa, tracheal glands, muscle and cartilage, collagenous and elastic fibers, and adventitia, which were more developed than those of 120-day-old fetuses. The tracheal epithelium was developed as that in adults. Scanning electron microscopic studies: 4. In the 60-day-old fetuses, most of tracheal epithelial cells were nonciliated but short microvilli were sporadically observed on the luminal surface. On rare occasions, a few cells have solitary cilium. 5. In the 90-day-old fetuses, the ciliated cells appeared increasingly and cilia elongated longer than those of 60-day-old fetuses. 6. In the 120-day-old fetuses, the nonciliated cells covered with microvilli in dome-shape were barriered by thick carpet of cilia. The nonciliated cells also have many papillary projectons on the apical surface. 7. In the neonates, the nonciliated cells in tracheal epithelium were covered compactly with numerous cilia, and many secretory droplets were found on the cilia. Transmission electron microscopic studies: 8. In the 60-day-old fetuses, nonciliated cells of the tracheal epithelium contain large amounts of glycogen granules in the supernuclear and subnuclear areas meanwhile a few cell organelles were formed. Cilia were well formed along the apical cell membranes of the ciliated cells. Also found in the ciliated cells were basal corpuscles, mitochondria and short chains in granular endoplasmic reticulum(GER). Between the epithelial cells presented were well-defined junctional complex with zonula occludens and desmosomes. The nuclei were variable in size and shape. The more developed nucleoli were observed conspicuosly. 9. In the 90-day-old fetuses, nonciliated cells contained large glycogen granules. Accumulated glycogen granules were observed in the subnuclear and supranuclear portion of the cytoplasm. A few short microvilli were covered with glycocalyx. Ciliated cells contained numerous mitochondria and short chains of GER. 10. In the 120-day-old fetuses, the ciliated cells contained numerous mitochondria, abundant short chains of GER and nucleoli. Nonciliated cells contained some Golgi complex and mitochondria. The cell borders were well-defined and distinct junctional complex with zonula occludens, desmosomes, and interdigitorum. 11. In the neonates, well-developed goblet cells were observed in the tracheal epithelium. Ultrastructures of ciliated and nonciliated cells on the tracheal epithelia were similar in pattern as those in adults.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.208-215
• /
• 2009

As a fundamental study to develop absorbing materials on harmful volatile organic compounds (VOC) such as formaldehyde, structural and crystalline characteristics of MDF carbonized at different temperatures were examined by a scanning electron microscope and an X-ray diffraction method. Fibers in surface layer of MDFs showed more compressed morphology than those in middle layer of MDFs, but the porosity of MDFs increased with increasing the carbonized temperature. The wrinkle shape was frequently surfaces of cell walls was more severe than that at the lumina of cells. The shape of pits in the fibers of carbonized MDFs were hardly changed. The cell walls of MDFs carbonized at $400^{\circ}C$ and over showed an amorphous-like structure without cell layering. X-ray diffratograms from the MDFs carbonized at $400^{\circ}C$ showed a trace of crystalline cellulose. On the other hand, an amorphous diffraction pattern from carbons was obtained with the MDFs carbonized at $1,000^{\circ}C$.