• Current Optics and Photonics
• /
• 제5권6호
• /
• pp.617-626
• /
• 2021

A parallel Monte Carlo photon migration algorithm for graphics processing units that implements an improved load-balancing strategy is presented. Conventional parallel Monte Carlo photon migration algorithms suffer from a computational bottleneck due to their reliance on a simple load-balancing strategy that does not take into account the different length of the mean free paths of the photons. In this paper, path-partition load balancing is proposed to eliminate this computational bottleneck based on a mathematical formula that parallelizes the photon path tracing process, which has previously been considered non-parallelizable. The performance of the proposed algorithm is tested using three-dimensional photon migration simulations of a human skin model.

• 대한치과보철학회지
• /
• 제25권1호
• /
• pp.119-135
• /
• 1987

For the determination of instantaneous centre of rotation in the mandibular movement, the habitual opening path was recorded on the sagittal tracing plate by a Gnathorecorder attached on the lower anterior teeth which was designed for this study. The opening path was demonstrated mathematically and the instantaneous centre of rotation in the opening path were calculated and plotted by computer programs, and then a computer graphic movement of the mandible was obtained according to the opening path. The hinge path of posterior border movement was graphied by the Gnathorecorder as well and demonstated mathematically. This hinge path was compared with the same obtained by Visitrainer to prove a reliability of the Gnathorecorder. The results obtained from this study were as follows. 1. The habitual opening path and hinge path obtained from the Gnathorecorder movement were expressed mathematically as follows: $y=0.11x^2-0.66x+3.09$ (equation of opening path), $y=0.04x^2+0.21x+3.71$ (equation of hinge path), and a kinematic hinge axis was not shown in the equation of kings path. 2. The early habitual opening movement of the mandible demonstrated almost a straight opening path or an arc motion with the larger radius and it's centre of rotation moved parallelly in the more rear and lower position than a kinematic hinge axis. 3. Instantaneous centre of rotation occured along with the translation of the condyle, and mandible was rotated around an axis in the close to the maximum opening and then moved toward the forward and upward position. 4. There were some similarities between the articular eminence and the movement pattern of a special point which was the kinematic hinge axis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.173-176
• /
• 2000

we analyzed multiple ray tracing in the highly scattering optical transmission(HSOT) polymer plate by means of the Monte carlo simulation. Light transmission behavior in the light guide was simulated by a 3-dimensional ray tracing program considering scattering angle given by the Mie theory and mean free path. To improve the uniformity of the conventional HSOT backlight unit, We employed additionally dot patterns. For the proposed structure, we calculated the light transmission behavior and obtained a bright and uniform backlight unit for a large size LCD panel of more than 12 inch.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.511-515
• /
• 2017

Various walking robot platforms have been developed to carry out missions such as explorations, pass of obstacle or inspections of dangerous environments. In this work, a four legs mechanism based on Jansen mechanism is developed, which can trace a certain line. In order to maximize the tracing speed, mechanism design is performed in multiple phases using m.sketch, EdisonDesign and Arduino programs. In design process, control of power path and optimization of the locus of legs(GL/GAC) are found to be most important. A prototype model is constructed and test run to check the validity of the design optimization.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.153-158
• /
• 2007

The present study covers numerical analysis of a thermionic scanning electron microscope(SEM) column. The SEM column contains an electron optical system in which electrons are emitted and moved to form a focused beam, and this generates secondary electrons from the specimen surfaces, eventually making an image. The electron optical system mainly consists of a thermionic electron gun as the beam source, the lens system, the electron control unit, and the vacuum unit. For a systematic design of the electron optical system, the beam trajectories are investigated through numerical analyses by tracing the ray path of the electron beams, and the quality of resulting image is evaluated from the analysis results.

• ETRI Journal
• /
• 제45권4호
• /
• pp.557-569
• /
• 2023

Traditional deterministic channel modeling is accurate in prediction, but due to its complexity, improving computational efficiency remains a challenge. In an alternative approach, we investigated a multilayer artificial neural network (ANN) to predict large-scale and small-scale channel characteristics in metro tunnels. Simulated high-precision training datasets were obtained by combining measurement campaign with a ray tracing (RT) method in a metro tunnel. Performance on the training data was used to determine the number of hidden layers and neurons of the multilayer ANN. The proposed multilayer ANN performed efficiently (10 s for training; 0.19 ms for prediction), and accurately, with better approximation of the RT data than the single-layer ANN. The root mean square errors (RMSE) of path loss (2.82 dB), root mean square delay spread (0.61 ns), azimuth angle spread (3.06°), and elevation angle spread (1.22°) were impressive. These results demonstrate the superior computing efficiency and model complexity of ANNs.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.290-295
• /
• 2010

In this paper, an interference analysis method with a site-specific path loss model for a wireless personal area network (WPAN) is proposed. The site-specific path loss model is based on geometrical optics and geometric probability to consider both site-specific radio propagation characteristics and a closed-form expression to obtain the mean interference from which the uniformly distributed multiple interferers are derived. Therefore, the proposed interference analysis method can achieve more computational simplicity than the Monte-Carlo (MC) simulation, which uses the ray-tracing (RT) technique. In addition, better accuracy than the conventional interference analysis model that uses stochastic method can also be achieved. To evaluate the proposed method, a signal to the interference-noise ratio with a mean interference concept for uniformly distributed interferers is calculated and compared in two simulation scenarios. As a result, the proposed method produces not only better matched results with the MC simulation using the RT technique than the conventional interference analysis model, but also simpler and faster calculation, which is due to the site-specific path loss model and closed-form expression for interference calculation.

• 한국지능시스템학회논문지
• /
• 제14권7호
• /
• pp.907-913
• /
• 2004

일반적인 이동 로봇의 주된 관심은 경로 생성과 생성된 경로 추종에 있다. 그러나 일부 고속의 이동성이 필요로 하는 로봇의 경우 동역학적 제한 조건이 존재하며, 이러한 제한 조건 내에서 원하는 움직임에 대한 제어가 요구된다. 된 논문에서 환경 지도를 가지고 있지 않은 상태, 즉 미지의 환경에서 이동 로봇의 경로 추종에 있어서 빠른 이동시에 발생할 수 있는 이동 로봇의 미끄러짐이나 전복 현상을 막기 위해 이동 로봇의 동역학적 제한 조건을 퍼지 논리를 이용하여 기준 속도를 변화시켜 안전하고 빠는 경로 추종 성능을 얻고자 하였다. 특히, 라인 추종 이동 로봇을 모델링하여 실시간으로 변화하는 목표점에 대한 추종 제어기를 설계하고 퍼지 최적 속도 제한 제어기를 통해 연속적으로 변화하는 라인에 대해서 지능적으로 로봇의 속도를 제한하여 안정적인 추종 성능을 발휘함을 확인하였다.

• 정보보호학회논문지
• /
• 제13권6호
• /
• pp.173-186
• /
• 2003

해킹 공격자는 공격 근원지 IP 주소를 스푸핑하여 대량의 트래픽을 발생시켜 DDoS 공격을 수행하게 된다. 이에 대한 대응 기술로 제시된 IP 역추적 기술은 DDoS 공격의 근원지를 판별하고 공격 패킷이 실제적으로 네트워크 상에서 전달된 경로를 재구성하는 기법이다. 기존의 역추적 기법은 크게 패킷을 중심으로 한 마킹 방법 또는 메시지 방식을 이용한 전향적 역추적 기법과 해킹 공격이 발생하였을 경우 네트워크 관리 모듈에 의해 공격 경로를 재구성하는 대응적 기법이 있으나 각기 문제점을 발견할 수 있다. 전향적 기법인 경우 네트워크를 구성하는 라우터에 대한 공격시 취약점을 보이고 있으며 전체 네트워크의 성능을 저하시킨다는 단점이 있다. 이에 본 연구에서는 pushback 기능을 적용하여 DDoS 판별/제어 기능을 제공하면서 DDoS 공격 근원지를 역추적하기 위해 개선된 ICW Traceback 기법을 적용하여 네트워크 부하를 줄이고 역추적 성능을 향상시켰다.

• Structural Engineering and Mechanics
• /
• 제11권2호
• /
• pp.199-210
• /
• 2001

Axially compressed circular cylinders repeat symmetry-breaking bifurcation in the postbuckling region. There exist stable equilibria with all symmetry broken in the buckled configuration, and the minimum postbuckling strength is attained at the deep bottom of closely spaced equilibrium branches. The load level corresponding to such postbuckling stable solutions is usually much lower than the initial buckling load and may serve as a strength limit in shell stability design. The primary concern in the present paper is to compute these possible postbuckling stable solutions at the deep bottom of the postbuckling region. Two computational approaches are used for this purpose. One is the application of individual procedures in computational bifurcation theory. Path-tracing, pinpointing bifurcation points and (local) branch-switching are all applied to follow carefully the postbuckling branches with the decreasing load in order to attain the target at the bottom of the postbuckling region. The buckled shell configuration loses its symmetry stepwise after each (local) branch-switching procedure. The other is to introduce the idea of path jumping (namely, generalized global branch-switching) with static imperfection. The static response of the cylinder under two-parameter loading is computed to enable a direct access to postbuckling equilibria from the prebuckling state. In the numerical example of an elastic perfect circular cylinder, stable postbuckling solutions are computed in these two approaches. It is demonstrated that a direct path jump from the undeformed state to postbuckling stable equilibria is possible for an appropriate choice of static perturbations.