• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.271-272
• /
• 2008

TD-SCDMA combines TDMA and CDMA components to provide more efficient use of radio resources, and includes a new feature called HSDPA (high-speed downlink packet access) in the R5 stage. The TD-HSDPA supports high-speed traffic with a shared channel, but its uplink mechanism causes feedback problem for scheduling. Since the base station of TD-SCDMA can estimate the location of mobile terminals precisely, it can also estimate the possible path loss. In this paper, the base station utilizes the estimated path loss for scheduling, which is related with CQI (channel quality indicator) values. The proposed mechanism can provide the TD-HSDPA scheduler with an intial CQI value for efficient transmission.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.314-317
• /
• 2003

In this paper, a measurement and analysis program is developed, that can be utilized to measure and analyze radio propagation characteristics. This program is able to control the measurement instruments including spectrum analyzer through a GPIB interface, and analyze the measured data to yield mean excess delay and RMS delay spread. The measured path loss can be compared with theoretical path loss in free space or inside tunnels. The measured and analyzed results can also be presented in the forms of graphs. As those tasks can be conducted on the measurement spot, this program is very helpful for performing and verifying measurements.

• Journal of Power Electronics
• /
• v.6 no.3
• /
• pp.205-213
• /
• 2006

A cost-effective magnetic-coupled AC-PDP sustain driver with low switching loss is proposed. The transformer reduces current stress in the energy recovery switches which affects circuit cost and reliability. The turns-ratio can be used to adjust the sustain pulse slopes which affect gas discharge uniformity. Dividing the recovery paths prevents abrupt changes in the output capacitance and thereby switching losses of the recovery switches is reduced. In addition, the proposed circuit has a more simple structure because it does not use the recovery path diodes which also afford a large recovery current. By reducing the current stress and device count in the energy recovery circuit, the proposed driver may have decreased circuit cost and improved circuit reliability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1534-1541
• /
• 2000

Wavelength tunable fiber ring laser can be tuned by causing a resonance on the optical path having the least loss which is controlled by a polarization adjustment. It is observed that lasing wavelengths having 1 nm FSR(Free Spectral Range) can be tuned over the range of 1540-1560 nm when a polarization controller and an intra-cavit polarizer with 1.5 mm air gap are adjusted. The characteristics of wavelength shift in the laser output are analyzed by introducing an optical path modeling and the concept of a birefringence loss.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1567-1570
• /
• 2022

This paper, we presents a RF protection technique of antenna switch by improving the power handling capability in worst case environment mode for mobile phone applications without critical payment of circuit performances such as insertion loss, isolation and ACBV (AC breakdown voltage). By applying a additional capacitive path located in front of the antenna in cell-phone, it performs the effective reduction of input power in high voltage standing wave ratio (VSWR) condition. Under the all-path off condition which causes a high VSWR, it achieved 37.7dBm power handling level as high as 5.7dB compared to that of conventional one at 2GHz. In addition, insertion loss and isolation performances were 0.31dB and 42.72dB at 2 GHz, respectively which were almost similar to that of the conventional circuit. The proposed antenna switch was fabricated in 130nm CMOS SOI technology.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.63-68
• /
• 2022

Two wavelength reconfigurable optical nodes are designed. One for 20km or shorter link length, and the other for up to 60km link length. While the first one requires no dispersion compensation, the latter needs dispersion compensation fiber included in the node, which requires additional optical amplifier to compensate the insertion loss of DCF. We calculate all the optical path losses in both cases using the typical value of optical components in the market to see the feasibility of the designed optical node. The minimum received power in the node is calculated to be -21.5dBm without DCF and -12.5dBm with DCF, respectively. These received powers are above the receiver sensitivity both for OC-48 and OC-192 according to the previous work.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2013-2018
• /
• 2014

According to the manufacturing process of the laminated stator core for an inserted permanent magnet synchronous motor (IPMSM), the iron loss may be different. It is because the mechanical stress imposed to electrical steel sheet is strongly dependent on the manufacturing process. This paper proposes a new iron loss measurement algorithm which utilizes the induced voltage of a search coil and exciting current. The method is effective even when the distribution of magnetic flux density is not uniform along the magnetic flux path as well as uniform. The developed iron loss measurement system is applied to bonded- and embossed-type segmented stator cores of an IPMSM, and the iron losses are quantitatively compared.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.7
• /
• pp.79-87
• /
• 1997

Untill now, the most well-known cofiguration for waveguide grating router(WGR) is composed of radiative star couplers and arrayed waveguide grating(AWG), which usually suffer form the rdiation loss of around 3dB or more. Therefore, te improved design of WGRs is needed to reduce the loss. In ths paper, we propose a novel WGR composed of multimode interference couplers which have good unifiormity, fabrication tolerance, and very low excess loss, and suggest the efficient algorithm to find the proper path length differences of AWG for given channel spacing and channel assignment to each output prot. The simulated spectral responses of the proposed WGR using the finite difference beam propagation method (BPM) show that the excess loss is less than 0.3dB and the crosstalk less than -25dB in case of 4x4 WGR, and the excess loss less than 0.4dB and the crosstalk less than -25dB in case of 8x8 WGR for all the channel wavelengths.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1990.10a
• /
• pp.164-168
• /
• 1990

• 한국ITS학회:학술대회논문집
• /
• 2002.11a
• /
• pp.206-209
• /
• 2002