Browse > Article
http://dx.doi.org/10.5370/JEET.2014.9.6.2013

Measurement and Comparison of Iron Loss in Bonded- and Embossed-Type Segmented Stator Cores for IPMSM  

Jeong, Kwangyoung (College of Electrical and Computer Engineering, Chungbuk National University)
Zhang, Dianhai (School of Electrical Engineering, Shenyang University of Technology)
Kwon, Jaehoon (College of Electrical and Computer Engineering, Chungbuk National University)
Ren, Ziyan (School of Electrical Engineering, Shenyang University of Technology)
Koh, Chang-Seop (College of Electrical and Computer Engineering, Chungbuk National University)
Publication Information
Journal of Electrical Engineering and Technology / v.9, no.6, 2014 , pp. 2013-2018 More about this Journal
Abstract
According to the manufacturing process of the laminated stator core for an inserted permanent magnet synchronous motor (IPMSM), the iron loss may be different. It is because the mechanical stress imposed to electrical steel sheet is strongly dependent on the manufacturing process. This paper proposes a new iron loss measurement algorithm which utilizes the induced voltage of a search coil and exciting current. The method is effective even when the distribution of magnetic flux density is not uniform along the magnetic flux path as well as uniform. The developed iron loss measurement system is applied to bonded- and embossed-type segmented stator cores of an IPMSM, and the iron losses are quantitatively compared.
Keywords
Bonded core; Embossed core; Iron loss; Iron loss measurement; Segmented stator core;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 P-. W. Han, U-. J. Seo, J-. H. Choi, Y-. D. Chun, D-. H. Koo, and J. Lee, "Optimizing design variables for high efficiency induction motor considering cost effect by using genetic algorithm," Journal of Electrical Engineering and Technology (JEET), vol. 7, no. 6, pp. 948-953, 2012.   과학기술학회마을   DOI   ScienceOn
2 O. Nakazaki, Y. Kai, T. Todaka, and M. Enokizono, "Iron loss properties of a practical rotating machine stator core at each manufacturing stage," Int. J Appl. Electrom, vol. 33, pp. 79-86, 2010.
3 D. H. Zhang, C. S. Park, and C. S. Koh, "A new optimal design method of rotor slot of three phase squirrel cage induction motor for NEMA class d speed-torque characteristic using multi-objective optimization algorithm," IEEE Trans. Magn., vol. 48, no. 2, pp. 879-882, Feb. 2012.   DOI   ScienceOn
4 G-. W. Cho, C-. M. Kim, and G-. T. Kim, "The maximum efficiency driving in IPMSM by precise estimation of current phase angle," Journal of Electrical Engineering and Technology (JEET), vol. 8, no. 6, pp. 1345-1351, 2013.   DOI   ScienceOn
5 M. Takashima, N. Morito, A. Honda, and C. Maeda. "Nonoriented electrical steel sheet with low iron loss for high-efficiency motor cores," IEEE Trans. Magn., vol. 35, no. 1, pp. 557-561, Jan. 1999.   DOI   ScienceOn
6 Deepak Singh, "Calorimetric measurement of the stator core losses caused by manufacturing," Master Thesis, AALTO University, Arabia, 2011.
7 Boglietti A, Cavagnino A, Ferraris L, and Lazzari M, "The annealing influence onto the magnetic and energetic properties in soft magnetic material after punching process," IEEE Int. Conf. Electric Machines and Drives (IEMDC'03). vol. 6, pp. 503-508, 2003.
8 IEC Standard Publication 60404-2, "Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame," 2008.
9 JIS C 2556, "Methods of measurement of the magnetic properties of magnetic steel sheet and strip by means of a single sheet tester," 1996.
10 M. Petkovsek, P. Zajek, J. Nastran, and D. Voncina, "Determination of magnetic properties of soft-magnetic ring cores with a reduced number of primary and secondary winding turns," IEEE Int. Symp. Ind. Electronics, 2004, vol. 1, pp. 577-581, 4-7 May 2004.
11 K. Matsubara, N. Takahashi, K. Fujiwara, and T. Nakata, "Acceleration technique of waveform control for sing sheet tester," IEEE Trans. Magn., vol. 31, no. 6, pp. 2400-2402, Nov. 1995.
12 K. Y. Jeong, "Measurement of stator core loss of an induction motor at each manufacturing process," Mater Thesis, Chungbuk National University, Korea, 2014.
13 K. Y. Jeong, Z. Y. Ren, H. S. Yoon, and C-.S. Koh, "Measurement of stator core loss of an induction motor at each manufacturing process," Journal of Electrical Engineering and Technology (JEET), vol. 9, no. 4, pp. 1309-1314, Jul. 2014.   과학기술학회마을   DOI   ScienceOn