• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.274-282
• /
• 2013

This study was carried out to find out the physicochemical properties of rice grains of 8 varieties having various amylose content. Amylose contents of 8 varieties were ranged from 6.3 to 30.9% and could be classified into 4 groups, such as waxy, low-amylose, nonglutinous, and high-amylose. Protein contents were ranged from 5.8% to 7.5% varied depending on variety, but there was no significant difference in protein contents among groups. The hardness of milled rice grains in low-amylose and non-glutinous was stronger than waxy and low-amylose group. Whiteness of waxy group grains was the highest while non-glutinous group was the lowest. The alkaline digestive values were evenly distributed from 5.2 to 6.9 and highly correlated with amylose content. There was significant difference in pasting properties of rice flours among groups. High-amylose group showed the highest initial pasting temperature and total setback viscosity, and the lowest peaks for trough and breakdown viscosity. Low-amylose group showed the highest breakdown viscosity but the lowest setback viscosity as well as high peak viscosity. Although amylose content was significantly correlated with alkali spreading value in milled rice, initial pasting temperature, and total setback, but it was negatively correlated with toyo-meter value and setback viscosity.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.4
• /
• pp.489-496
• /
• 2012

This research investigated the quality characteristics and anthocyanin content of wet noodles according to the amount of freeze-dried purple sweet potato powder. For viscosity, initial pasting temperature tended to increase compared to the control group, whereas peak viscosity, peak viscosity time and final viscosity steadily decreased. As the amount of purple sweet potato powder increased, breakdown value of viscosity and set back value significantly decreased. For chromaticity, as the amount of purple sweet potato powder increased, L-value decreased gradually, whereas a-value gradually increased and b-value significantly decreased compared to the control group. Anthocyanin content significantly increased in the addidtive group (91.79) compared to the control group (70.20). Measurement of texture characteristics found that hardness was highest in the control group, but it decreased as the amount of purple sweet potato powder increased. Springiness, gumminess and chewiness were highest in the control group. In the sensory evaluation, color, odor, chewiness, and overall acceptance were high in the 6% addictive group. In this study, by investigating the anthocyanin contents, quality characteristics and sensory attributes of wet noodles with freeze-dried purple sweet potato powder, we found that the 6% additive group is the best. Our results provide basic information for the development of noodles with purple sweet potato powder.

• Korean journal of food and cookery science
• /
• v.27 no.2
• /
• pp.19-29
• /
• 2011

Sweet potato powders made from eight Korean varieties, including purple-fleshed, orange-fleshed, and commercial dry type sweet potatoes, were investigated for physicochemical and pasting properties to develop processed food. Crude protein and lipid contents of Shinjami and Borami were higher than those of other varieties. The lightness value of raw sweet potato flesh was the highest value in Shinchunmi, and the lowest in Shinjami. Using the color difference (${\Delta}E$), color similarities compared to the white plate occurred in the following order; purple-fleshed > orange-fleshed > commercial dry type sweet potatoes. Total and damaged starch contents were significantly different (p<0.05). Total starch content of sweet potatoes was higher in commercial dry sweet potatoes (61.89-70.46%), particularly Shinchunmi (70.46%) but lower in orange-fleshed sweet potato (48.87 and 49.53%, respectively). Water binding capacity of Yeonwhangmi, swelling power and solubility of Shinyulmi were the highest values (174.70, 25.54 and 87.49%, respectively) among them (p<0.05). But oil absorptions of Shinyulmi and Shinchunmi showed lower values (97.08 and 97.54%, respectively). All sweet potato powders had an A type x-ray diffraction pattern. The initial pasting temperatures of sweet potato powders ranged from 69.50 to $75.95^{\circ}C$ and the amylolytic enzyme in sweet potato powder lowered pasting viscosity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.260-266
• /
• 2013

The study was carried out to determine the gel pasting properties of barley (Hordeum vulgare L. cv. Geoncheonheugbori) as affected by different proton beam irradiation. The ${\lambda}max$, blue value, and amylose content were significantly associated with increasing proton beam irradiation. The pasting time in barley flour irradiated with proton beam ranged 0.09 to 0.16 min shorter than nonirradiated barley flour. Gel pasting temperature ranged 57.4 to $60.5^{\circ}C$. Gel pasting temperature in barley flour decreased with increasing proton beam irradiation. Proton beam irradiation caused a significant decrease in the onset temperature (To), peak temperature (Tp), conclusion temperature (Tc) and enthalpy change (${\Delta}H$). Gelatinization range (R) in barley starch was more broaden than that of non-irradiated barley starch. Barley starches gave the strong diffraction peak at around $2{\Theta}$ values$15^{\circ}$, $18^{\circ}$, $20^{\circ}$, and $23^{\circ}$ $2{\Theta}$. Peak intensity tended to increase with increased proton beam irradiation. The granule crystallinity is closely associated with decreased amylose and increased amylopectin component. The crystallinity degree of barley starch irradiated with proton beam was significantly increased and it ranged from 24.9 to 32.9% compared to the non-irradiated barley starches. It might be deduced that proton beam irradiation causes significant changes of properties of starch viscosity in rice, especially at high irradiation of proton beam.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.149-153
• /
• 2005

Composition and pasting properties of endosperms of one common buckwheat (CB) and two tartary buckwheats (TB) grown in China were investigated. No differences were observed in proximate composition and amino acid content between CB and TB. Content of rutin in TB was 22-fold higher than that of CB. Among minerals, iron, calcium, and magnesium contents were higher in TB than CB, whereas zinc, manganese, and phosphorus contents were similar, Pasting properties measured with Rapid visco Analyzer revealed TB-2 cultivar had highest peak viscosity, trough, and breakdown, followed by TB-1 and CB. Setback of TB was about 2.2-fold greater than that of CB. Significant differences in color were observed between CB and TB, and among TB cultivars.

• Korean Journal of Food Science and Technology
• /
• v.39 no.1
• /
• pp.33-38
• /
• 2007

The peak time, peak height, width at peak, and the width at 8 min of Mixograph increased as the amount of sodium chloride in yellow alkaline noodle sheet was increased. The peak time of the Mixograph duration increased almost twice when 0.5% sodium carbonate was added to yellow alkaline noodle sheet, but decreased when the amount of sodium carbonate was above 0.5%. The peak height decreased as the amount of sodium carbonate increased. Protein content and sedimentation values showed positive correlations with the Mixograph peak height, width at peak, and width at 8min. The pasting temperature, peak viscosity, minimum viscosity, and final viscosity increased as the amount of sodium chloride in yellow alkaline noodle sheets was increased for all wheat flours. The peak viscosity, minimum viscosity, and final viscosity also increased as the amount of sodium carbonate increased. The pasting temperature showed a positive correlation with the water retention capacity and the alkaline water retention capacity.

• Korean Journal of Food Science and Technology
• /
• v.51 no.2
• /
• pp.109-113
• /
• 2019

The soft rice varieties, Hangaru and Singil, were developed via mutation breeding using N-methyl-N-nitrosourea treatment to obtain dry-milled rice flours. The physicochemical, morphological, and pasting properties of these starches were compared with those of Seolgaeng and Chuchung starches. Singil starch was found to exhibit the highest amylose content and initial pasting temperature, whereas Hangaru starch exhibited the highest water binding capacity and swelling power. Hangaru starch's granule size at $d_{50}$ was the largest among the four different starch types. Some Seolgaeng, Hangaru, and Singil granules were observed to have a round-faced polygon shape. Furthermore, the crystallinity of all four starch types was type A. The peak, trough, and final viscosities of the soft rice starches were also lower than those of normal starches. Notably, Hangaru starch showed the highest breakdown viscosity, but the lowest total setback viscosity among the four starches. From these results, the starch characteristics of the soft rice flours were discovered to be different based on the rice variety.

• Applied Biological Chemistry
• /
• v.49 no.1
• /
• pp.49-54
• /
• 2006

Physicochemical properties of cross-linked rice starches were investigated. Swelling power of cross-linked rice starch increased at relatively lower temperature $(60^{\circ}C)$ than native rice starch $(70^{\circ}C)$. Cross-linked rice starch showed lower solubility $(1.7{\sim}6.1%)$ than native rice starch $(2.2{\sim}13.8%)$ and solubility is not significantly different with the amount of phosphorus oxychloride. Pasting temperature $(69.2{\sim}70.6^{\circ}C)$ and peak viscosity $(2,874{\sim}3,175\;cp)$ of cross-linked rice starch were lower than native starch $(71.6^{\circ}C,\;3,976\;cp)$, but holding strength $(2,177{\sim}2,708\;cp)$ and final viscosity $(3,424{\sim}3,826 \;cp)$ of cross-linked rice starch were higher than native starch (1,000 cp, 2,312 cp). DSC thermal transitions of cross-linked rice starches were shifted to a lower temperature than native rice starch but there was no significant difference in gelatinization enthalpy between native and cross-linked rice starches. X-ray diffraction pattern of both native and cross-linked rice starches showed typical A-type crystal indicating that cross-linking had not affected the crystalline region of starch.

• Culinary science and hospitality research
• /
• v.2
• /
• pp.183-207
• /
• 1996

This study is to investigate the effect on the quality and properties of bread affected by licorice extract addition. The measurements of the farinograph, extensograph and amylograph on dough are carried out. And the evaluations of volumetric changes during fermentation, shape of bread crumb, sensory test, firmness are obtained. The obtained results are as follows. 1. Proximate compositions of licorice extract are as follows: moisture 73.7%, crude protein 4.1%, crude lipid 2.8%, crude ash 1.4%. 2. Water absoorption, arrival time dough development time mechanical tolerence index and valorimeter value are increased but stability is decreased with the addition of licorice extract. 3. The resistance to extension is increased but extensibility is decreased with the addition of licorice extract. 4. The initial pasting and highest viscosity temperatures are not affected but the highest viscosity is steepy decreased over 1.0% addition of licorice extract. 5. The volume of dough during fermentation and specific volume of bread is decreased with the addition of licorice extract. 6. The grain of bread is to be rough and irregular and the firmness is increased with the addition of licorice extract. 7. The records of sensory test are decreased with the addition of licorice extract.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.115-118
• /
• 2010

The physicochemical properties such as blue value, iodine affinity, degree of polymerization (DP), $\alpha$-amylase digestibility, particle size, RVA pasting, and gel hardness of 4 different millet starches (foxtail, waxy foxtail, proso, and waxy proso) were investigated. The iodine affinity value of the four samples were 4.22, 0.49, 1.07, and 0.21%, and the DP values were 1830, 3880, 4660, and 4130, respectively. The levels of $\alpha$-amylase digestibility of the raw starches were 20.1, 30.7, 18.2 and 35.6%, respectively. The mean size of the proso millet starch was the smallest, $8.25\;{\mu}m$, and the size distribution of the particles was the narrowest among all the samples. Foxtail starch showed the largest peak viscosity and setback viscosity in RVA pasting.