• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.63-68
• /
• 2007

This paper presents vibration control performance of an active hybrid mount featuring piezostack actuators. The proposed hybrid mount is devised by adopting piezostack as an active actuator and rubber as a passive element. After experimentally identifying actuating force characteristics of the piezostack and dynamic characteristics of the rubber, the hybrid mount was designed and manufactured. Subsequently, a vibration control system with a specific mass loading is constructed, and its governing equations of motion are derived. In order to actively attenuate vibration transmitted from the base, a feedforward controller is formulated and experimentally realized. Vibration control responses are then evaluated in time and frequency domains.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.1 s.41
• /
• pp.3-21
• /
• 1992

The main objective of this study was to find out the relationship between life style types and clothing evaluatie criteriria. Social wear was selected according to the defined time, place, and occasion's. The questionnaire was administered to 640 housewives during the fall of 1988. The research problems were as follows: 1. To segment the target according to their life styles, and to profile the characteristics of the categorized life style types. 2. To determine the differences in the clothing evaluatie criteria among the various life style types. The result were as follows: 1. Five life style types were defined. They were the Achievement oriented type, the Active- leisure type, the Material oriented type, Conservative-frugal type, and the Passive-stagnant type. 2. The differences in consumer preferences at the element level evaluative criteria including color, fiber content, fabric construction, fabric design, and classes of clothes among the five life style types were also analyzed revealing partial significance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.7
• /
• pp.76-81
• /
• 2013

This paper presents an effective pedagogical method for nodal analysis in linear circuit. In the proposed method, basic equations are built only for passive elements and independent current sources. And then, the basic equations are modified by considering other sources such as voltage sources and dependent current sources. In the proposed method, the equations are presented in form of a matrix and a vector of which elements are built systematically by considering every element in a circuit one by one. This make the proposed method easy to apply to intricately composed circuit and easy to solve the final simultaneous equations and easy to realize as computer program for nodal analysis and easy to memorize compared to the conventional method.

• Smart Structures and Systems
• /
• v.17 no.5
• /
• pp.773-793
• /
• 2016

This work presents a methodology to distribute piezoelectric material for structural vibration active control. The objective is to design controlled structures with actuators which maximizes the system controllability. A topology optimization was formulated in order to distribute two material phases in the domain: a passive linear elastic material and an active linear piezoelectric material. The objective is the maximization of the smallest eigenvalue of the system controllability Gramian. Analytical sensitivities for the finite element model are derived for the objective functions and constraints. Results and comparisons with previous works are presented for the vibration control of a two-dimensional short beam.

• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.1031-1049
• /
• 2015

This paper highlights the role of innovative vibration control system based on two promising properties in a parallel configuration. Hybrid device consists of two main components; recentering wires of shape memory alloy (SMA) and steel pipe section as an energy dissipater element. This approach concentrates damage in the steel pipe and prevents the main structural members from yielding. By regulation of the main adjustable design parameter, an optimum performance of the device is obtained. The effectiveness of the device in passive control of structures is evaluated through nonlinear time history analyses of a five-story steel frame with and without the hybrid device. Comparing the results proves that the hybrid device has a considerable potential to mitigate the residual drift ratio, peak absolute acceleration and peak interstory drift of the structure.

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.123-127
• /
• 2008

This paper studied the sensitivity characteries of the electronic ballast for the discharge lamps, which implies variation ratio of the output power by the passive element variation. We have derived the equation to represent the lamp power, and obtained the sensitivity characteristic equations. The simulation result shows that the proposed equations are correct and very useful to design the electronic ballast with the LCpCs-type resonant tank.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.129-133
• /
• 2009

country for green growth under minimizing boils to do change in climate under confronting boil the use of petrifaction resources energy and in change. Reduces the greenhouse gas and a environmental contamination, continuity for the growth which is possible demobilizes the greens and ecosystem, with alternative the roof which is an idle space from the construction water and the greens and uses creates in compliance with the effect which is various an energy economy and applies. Roof telerecording the synergy effect which follows with the effect which is various is not the energy saving which leads one effect which is simple in harmony and this lives together the environment which leads and possibility means that becomes the environmental element which hits.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.607-610
• /
• 2003

The characteristic prediction and analysis of 3-dimensional (3-D) solenoid-type embedded inductors is investigated. The four different structures of 3-D inductor are fabricated by using low-temperature cofired ceramic (LTCC) process. The circuit model parameters of the each building block are optimized and extracted using the partial element equivalent circuit method and HSPICE circuit simulator. Based on the model parameters, predictive modeling is applied for the structures composed of the combination of the modeled building blocks. And the characteristics of test structures, such as self-resonant frequency, inductance and Q-factor, are analyzed. This approach can provide the characteristic conception of 3-D solenoid embedded inductors for structural variations.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.747-750
• /
• 2002

A circuit building block for realizing a continuous-time active-only current-mode integrator is presented. The proposed integrator is composed only of internally compensated type operational amplifier (OA) and operational transconductance amplifiers (OTAs). The integrator is suitable for integrated circuit implementation in either bipolar or CMOS technologies, since it does not require any external passive elements. Moreover, the integrator gain can be tuned through the transconductance gains of the OTAs. Some application examples in the realization of current-mode network functions using the proposed current-mode integrator as an active element are also given.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.1
• /
• pp.33-37
• /
• 2008

This paper describes the development of a new $5.0{\times}3.2mm$ SAW filter bank which is consist of 12 L, C matching components and 4 SAW bare chips on PCB substrate with CSP technology. We improved the manufacturing cost by removing the ceramic package through direct flip bonding of $LiTaO_3$ SAW bare chip on PCB board after mounting L, C passive element on PCB board. After that we realized the hermitic sealing by laminating the epoxy film. To confirm the confidentiality and durability of the above method, we have obtained the optimum flip bonding & film laminating condition, and figured out material property and structure to secure the durability & moisture proof of PCB board. The newly developed super mini $5.0{\times}3.2mm$ filter bank shows the superior features than those of existing products in confidence, electrical, mechanical characters.