• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.308-313
• /
• 2006

포탄의 탄착점은 대포의 형상, 제작공차, 제어시스템 그리고 발사체의 제작공차 등 여러 변수의 함수이다. 본 논문에서는 포탄의 탄두를 본체와 분리, 움직임이 가능한 형태로 부착하여 탄착점의 정확도를 향상시키는 가능성에 대하여 검토하였다. 기존의 포탄이 갖는 6 개의 자유도에 탄두의 3 개의 자유도를 더한 9 자유도의 동역학 식을 유도하였고 시뮬레이션을 통하여 가변탄두를 갖는 발사체가 탄두부분의 피치(pitch)와 요(yaw) 회전운동을 통하여 발사 초기의 불확실성을 흡수할 수 있음을 확인하였다.

• 한국해양공학회지
• /
• 제7권1호
• /
• pp.13-24
• /
• 1993

해양오염은 환경파괴의 주요 인자이다. 해양바닥에 가라않은 오염물질을 근본적으로 제거하는 문제와는 별도로, 파동(wave)에 의해 그것이 자동적으로확산될 수가 있다. 파문(ripple)으로 덮혀진 해저(sea bottom)에서 표면의 중력파에 의한 물의 수평방향 요동운동은 와류(vrotices)를 발생시칸다. 이런한 유동장은 해저 침전물을 부유시켜 멀리까지 화가신시키는 작용을 한다.파문주위의 유동장을 살펴보면 모서리(crest)에서 발생된 와류로 인해 정상유동성분이 존재하며 이런한 정상유동은 파문의 주기적 형상으로인해 다분히 순환적이다. 이ㅔ 파동에 의한 요동운동이 가세하면 Taylor 와류와 같은 효과를 보여 줄 것이다. 해저부근에서의 이러한 확산효과를 보기 위하여, 해양유동을 단순화하여 최근 널리 이용되고 있는 혼돈이론을 가미시켰다. 아주 단순한 유동이라도 복잡한 입자의 궤적을 나타내며 입자의 확산과 연관됨을 수치해석을 이용하여 보여준다.

• 한국대기환경학회지
• /
• 제16권4호
• /
• pp.327-338
• /
• 2000

complexity in atmospheric environment coupled with shoreline and complex terrain often causes local variations of meteorology that are distinct from those representative over larger surrounding area, These kinds of local variations are less significant in usual long-term environmental impact analyses dealing with continuous plume. The variations could however be crucial in predicting dispersion of toxic substance released in a relatively small area for a short duration. In the present paper the effects of spatial and temporal resolution of diagnostic wind field on the dispersion of the released substance are investigated by using a puff model. A hypothetical release scenario assumes that a substance is released from a location in the Yochon Industrial Estate and passively dispersed within a few-kilometer distance for an hour. The results show that diagnostic analysis could resolve more spatial variations to some extent by employing smaller grid size. The peak concentrations and puff trajectories obtained from spatially -and/or tmeporally -varing diagnostic wind field are found appreciably different from those obtained from uniform wind field. Attention to high-resolution wind field in the both spatial and temporal spaces is called in the consequence analysis of toxic substance release.

• 대기
• /
• 제21권1호
• /
• pp.95-108
• /
• 2011

The effects of an apartment complex on flow and pollutant dispersion in an urban area are numerically investigated using a computational fluid dynamics (CFD) model. The CFD model is based on the Reynolds-averaged Navier-Stokes equations and includes the renormalization group k-${\varepsilon}$ turbulence model. The geographic information system (GIS) data is used as an input data of the CFD model. Eight numerical simulations are carried out for different inflow directions and, for each inflow direction, the effects of an apartment complex are investigated, comparing the characteristics of flow and dispersion before and after construction of the apartment complex in detail. The observation data of automatic weather system (AWS) is analyzed. The windrose analysis shows that the wind speed and direction after the construction of the complex are quite different from those before the construction. The construction of the apartment complex resulted in the decrease in wind speed at the downwind region. It is also shown that the wind speed increased partially inside the apartment complex due to the channeling effect to satisfy the mass continuity. On the whole, the wind speed decreased at the downwind region due to the drag effect by the apartment complex. As a result, the passive pollutant concentration increased (decreased) near the downwind region of (within) the apartment complex compared with that before the construction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.420-425
• /
• 2001

Theoretical analysis of noise reduction by a membrane-duct system is presented. When acorn waves propagate in the membrane-duct, the membrane is also excited and its motion is coup with interior medium. It has been shown that propagating waves with supersonic wave speed exist beyond a certain critical frequency that is determined from the mass ratio of the me and the fluid. Also found are subsonic waves which couple strongly wi th the membrane a provide a powerful mechanism of energy dissipation. Existence of an exterior medium alter dispersion characteristics. It provides additional mass loading and reduces the subsort speed further. The effect of mean flow speed on dispersion characteristics is also consider results show that the membrane-duct system can be applied to diminish and absorb 1 frequency noise in duct instead of passive muffler, such as a simple expansion chamber absorption material.

• 한국재료학회지
• /
• 제17권2호
• /
• pp.86-90
• /
• 2007

The organic-capped Ba-Ti-O nanolayers were coated uniformly on spherical Ni particles for multilayer ceramic capacitor (MLCC) applications via the formation of Ti-hydroxide nano-coating layers and their subsequent reaction with Ba-stearate at $180^{\circ}C$. The capping of organic shell on oxide coating layer changed the hydrophilic surface structure into hydrophobic one, which significantly improved the dispersion behavior in hydrophobic solvents such as terpineol and butanol. In addition, the uniform coating of Ba-Ti-O layer was advantageous to prevent Ni oxidation. This method provides a useful chemical route to fabricate organic-soluble Ba-Ti-O coated Ni particles for a highly integrated passive component.

• ETRI Journal
• /
• 제32권2호
• /
• pp.248-254
• /
• 2010

We demonstrate a linear bus wavelength-reused gigabit wavelength-division multiplexing passive optical network (WDM-PON) with multiple optical add-drop nodes. A commercially available reflective semiconductor optical amplifier-based WDM-PON has a sufficient power budget to provide multiple optical add/drop nodes in 16 WDM channels. Sixteen 1.25 Gb/s WDM channels are successfully transmitted over 20 km of single-mode fiber with four optical add/drop multiplexers, even with 32 dB reflection and chromatic dispersion in the link.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.17-22
• /
• 2006

Shear modulus is directly linked to material's stiffness and is one of the most critical engineering parameters. Seismically, shear-wave velocity (Vs) is its best indicator. Although methods like refraction, down-hole, and cross-hole shear-wave surveys can be used, they are generally known to be tougher than any other seismic methods in field operation, data analysis, and overall cost. On the other hand, surface waves, commonly known as ground roll, are always generated in all seismic surveys with the strongest energy, and their propagation velocities are mainly determined by Vs of the medium. Furthermore, sampling depth of a particular frequency component of surface waves is in direct proportion to its wavelength and this property makes the surface wave velocity frequency dependent, i.e., dispersive. The multichannel analysis of surface waves (MASW) method tries to utilize this dispersion property of surface waves for the purpose of Vs profiling in 1-D (depth) or 2-D (depth and surface location) format. The active MASW method generates surface waves actively by using an impact source like sledgehammer, whereas the passive method utilizes those generated passively by cultural (e.g., traffic) or natural (e.g., thunder and tidal motion) activities. Investigation depth is usually shallower than 30 m with the active method, whereas it can reach a few hundred meters with the passive method. Overall procedures with both methods are briefly described.

• 지구물리와물리탐사
• /
• 제22권4호
• /
• pp.210-224
• /
• 2019

표면파 탐사는 매우 작은 규모의 초음파 분석부터 지질공학 규모의 분석까지 다양한 분야에서 활용하고 있으며, 특히 천부 지질의 지반 안정성을 평가하는 데 활발히 이용되고 있다. 표면파 탐사는 기본적으로 지표면을 따라 전파하는 표면파의 분산 특성에 기초하여 매질의 전단 속도 분포를 파악하는 탐사법이다. 즉, 지하 구조가 1차원 구조라는 가정 하에 탐사를 수행하는 표면파 탐사는, 진동수와 전파 속도의 관계인 분산곡선을 분석하고 1차원적 역산을 통해 층서구조 속도를 계산하게 된다. 이 논문에서는 천부 지질 조사를 위한 표면파 탐사법의 기초적인 이론부터 전반적인 자료처리 과정을 기술보고를 통해 설명하고자 한다. 먼저, 표면파에 대한 개략적인 설명과 가장 큰 특징 중 하나인 분산 특성에 대하여 설명한 후 일반적인 표면파 자료처리 순서에 대하여 설명하였다. 표면파 탐사법은 인공적인 송신원의 유무에 따라 능동 표면파 탐사법과 수동 표면파 탐사법으로 나눌 수 있으나 이 논문에서는 능동 표면파 탐사법인 CSW, SASW, MASW에 대하여 집중적으로 기술하였다. 수동 표면파 탐사법에 대해서는 다음 기술보고에서 다루고자 한다.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.50-58
• /
• 2018

Process Capability ($C_{pk}$) is a representative measure of how well the producer manages dispersion and bias for the specifications needed by the consumer. This is expressed as a ratio of 6 times the natural tolerance to the specification. As the producer manages the dispersion small, the capacity index becomes higher. And it is classified into 5 grades according to the degree of management. It is a measure of the quality of processes used in most industrial fields. However, $C_{pk}$ is calculated by only reflecting the mean and dispersion of the process, there is a disadvantage that it can not give information about the economic loss caused by the inconsistency of the process with the target value. Overcoming these drawbacks, process capability indexes reflecting various types of loss functions such as $C_{pm}$, $C^+_{pm}$ and $C_{pl}$ have been developed. However, all of these previous studies have applied the limit to the consumer specification, which is based on the traditional and passive quality perception that the quality characteristic should exist within the limits of the consumer specification. In this study, we will develop 'Customer Satisfaction Quality Indicator (CSQI)' which is a quantitative indicator that can be fully evaluated when the manufacturer's specification limit, which is an aggressive quality strategy, is applied. This is expected to be useful decision information for both producers and consumers.