• 제목/요약/키워드: passive dispersion

Search Result 33, Processing Time 0.034 seconds

신뢰성 있는 분산곡선의 결정을 위한 수동표면파 측정 및 분석기법의 제안 (A Recommendation of the Technique for Measurement and Analysis of Passive Surface Waves for a Reliable Dispersion Curve)

  • 윤성수
    • 한국지반공학회논문집
    • /
    • 제23권2호
    • /
    • pp.47-60
    • /
    • 2007
  • 해머나 중추 등의 순간가진원이나 진동기 등의 연속가진원을 사용하는 주동표면파기법에서는 저주파대역에서 충분한 에너지를 갖는 표면파를 얻기 어렵기 때문에, 종종 발생된 표면파의 가탐심도가 충분하지 못한 한계에 부딪힌다. 일반직인 가진원 장비로 발생되는 이러한 주동표면파의 한계는 심층지반구조를 파악할 수 없게 함으로써 지반의 정확한 지진응답해석을 어렵게 한다. 반면에 상시미동이나 주변잡음 등과 같은 수동가진원에 의해 발생된 수동표면파를 이용하면 저주파대역에서 충분한 에너지를 갖는 표면파를 얻을 수 있기 때문에 이러한 주동표면파의 단점을 극복하고 심층지반까지의 전단파속도 주상도를 얻을 수 있다. 수동표면파의 측정자료로부터 계산된 수동분산값의 신뢰도를 향상시키는 것은 보다 정확한 전단파속도 주상도를 얻기 위해 필수적이며, 수동분산값의 신뢰도를 향상시키기 위해선 수동분산값에 포함되는 계통오차에 대한 올바른 이해를 바탕으로 한 수동표면파의 측정과 분석이 필요하다. 본 논문에서는 수동표면파 시험에 있어 계통오차를 발생시키는 부족한 파수해상도와 측면로브를 통한 에너지누수에 관한 연구를 수행하고 신뢰성 있는 분산곡선 결정을 위한 수동표면파의 측정 및 분석기법을 제안한다. 제안된 기법을 적용한 일련의 수동표면파시험이 미국 캘리포니아주 산호세의 한 현장에서 수행되었다.

산악 계곡지형에서의 오염확산에 관한 연구(II) :수치해석 (A Study on the Pollutant Dispersion over a Mountain Valley Region (II) : Numerical Simulation)

  • 심우섭;김석철;유성연
    • 설비공학논문집
    • /
    • 제17권11호
    • /
    • pp.1060-1071
    • /
    • 2005
  • Passive gas dispersions over a 1/1000 scale terrain model at Eiffel type wind tunnel were reproduced by numerical simulation. Large eddy simulation was used to treat the sub-grid scale turbulences. The terrain features were represented by millions of point forces densely distributed over the solid surface using the virtual boundary method. The model simulations agreed very well with the experiments in a consistent fashion for all wind directions. The measured profiles of the wind speeds as well as the tracer gas concentrations were nicely simulated by the CFD model at most locations scattered over the model terrain. With scale factor adjusted and the thermal stratification effects incorporated, the CFD model was expected to provide reliable information on pollutant dispersions over the real complex terrains.

표면파 탐사 II: 수동 탐사법을 중심으로 (Surface Wave Method II: Focused on Passive Method)

  • 조성오;정인석;김빛나래;장한나;장성형;;남명진
    • 지구물리와물리탐사
    • /
    • 제25권1호
    • /
    • pp.14-25
    • /
    • 2022
  • 수동 표면파 탐사는 인공 송신원 없이 생활잡음 또는 자연 발생 소음 등을 송신원으로 이용해 탄성파 신호를 측정한다. 수동 송신원은 낮은 진동수 대역에서 발생하기 때문에 수동 표면파 탐사는 일반적인 능동 탐사법 보다 더 깊은 심도의 지질 정보를 확보할 수 있어 심부 부지 평가 분야에 많이 활용되고 있다. 수동 표면파 탐사 자료는 능동 표면파 탐사 자료 해석과 마찬가지로 자료 획득 후 진동수 분산곡선을 구하여 1차원으로 가정한 속도구조를 해석한다. 하지만 수동 표면파 탐사 자료는 송신원이 무작위로 발생한다는 특성 때문에 여러 수신기에서 측정된 신호들의 공간자기상관을(spatial autocorrelation) 이용해 수신 자료들의 일관성(coherence) 곡선을 구하고 이로부터 분산곡선을 구하게 된다. 이 기술보고에서는 수동 표면파 탐사 이론, 탐사 방법, 자료처리 기법을 살펴보고 실제 적용 사례를 분석한다.

Colorless Amplified WDM-PON Employing Broadband Light Source Seeded Optical Sources and Channel-by-Channel Dispersion Compensators for >100 km Reach

  • Kang, Byoung-Wook;Lee, Kwanil;Lee, Sang Bae;Kim, Chul Han
    • Journal of the Optical Society of Korea
    • /
    • 제18권5호
    • /
    • pp.436-441
    • /
    • 2014
  • We have demonstrated an amplified wavelength-division multiplexed (WDM) passive optical network (PON) by using broadband light source (BLS) seeded optical sources and chirped fiber Bragg gratings (FBGs) based dispersion compensators. Chirped FBGs located at central office (CO) were fabricated and used as channel-by-channel dispersion compensators in order to mitigate the dispersion-induced distortion of both downstream and upstream signals. Owing to a low insertion loss of chirped FBG based dispersion compensator, the optical signal-to-noise ratio (OSNR) of the downstream signal could be improved to be ~28 dB. Thus, we re-confirmed that an error-free transmission of 1.25 Gb/s signals over a 100 km single-mode fiber (SMF) link could be achieved with a proposed amplified WDM-PON architecture. We have also evaluated the impact of various noises on the system's performance, and found that the low OSNR of the downstream signal would be a main limiting factor on the maximum reach of the proposed amplified WDM-PON architecture. From the measured ~13 dB improvement in OSNR of the downstream signal compared to our previously-proposed dispersion compensating module based scheme, we believe that the proposed architecture can accommodate a reach of longer than 100 km SMF link easily.

고밀도 가스 확산 예측을 위한 라그란지안 입자 모델 (Lagrangian Particle Model for Dense Gas Dispersion)

  • 고석율;이창훈
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 추계학술대회
    • /
    • pp.899-904
    • /
    • 2003
  • A new model for dense gas dispersion is formulated within the Lagrangian framework. In several accidental released situations, denser-than-air vapour clouds are formed which exhibit dispersion behavior markedly different from that observed for passive atmospheric pollutants. For relevant prediction of dense gas dispersion, the gravity and entrainment effects need to implemented. The model deals with negative buoyancy which is affected by gravity. Also, the model is subjected to entrainment. The mean downward motion of each particle was accounted for by considering the Langevin equation with buoyancy correction term.

  • PDF

Solid-State Laser Mode-Locking Near 1.25 μm Employing a Carbon Nanotube Saturable Absorber Mirror

  • Cho, Won-Bae;Choi, Sun-Young;Kim, Jun-Wan;Yeom, Dong-Il;Kim, Ki-Hong;Rotermund, Fabian;Lim, Han-Jo
    • Journal of the Optical Society of Korea
    • /
    • 제15권1호
    • /
    • pp.56-60
    • /
    • 2011
  • We demonstrate passive mode-locking of a Cr:forsterite laser with a single-walled carbon nanotube saturable absorber mirror (SWCNT-SAM). Without compensation of intra-cavity dispersion, the self-mode-locked laser generates 11.7 ps pulses at a repetition rate of 86 MHz. The dispersion-compensated laser yields ultrashort pulses as short as 80 fs near $1.25\;{\mu}m$ at 78 MHz with average output powers up to 295 mW, representing the highest power ever reported for mode-locked solid-state lasers based on saturable absorption of SWCNTs in this spectral region.

시화공단 완충녹지대의 대기오염물질 저감 효과 분석 (Effect of Green Buffer Zone in Reducing Gaseous Air Pollutants in the Shiwha Industrial Area)

  • 송영배
    • 한국조경학회지
    • /
    • 제33권6호
    • /
    • pp.90-97
    • /
    • 2006
  • The effects of a green buffer zone to protect a residential area from air pollution from industrial facilities and traffic was examined by analyzing the case of a green buffer zone in the Shiwha industrial complex. The green buffer zone is 175 m wide. The intent was to assess the dispersion patterns of atmospheric air pollutants and the reduction in concentration around the green buffer zone. To measure atmospheric sulfur dioxide$(SO_2)$ and nitrogen dioxide$(NO_2)$ concentration, badge-type passive samplers were used and set up at 76 locations in order to measure the concentration of air pollutants with respect to the spatial dispersion. The weighted mean values of $SO_2\;and\;NO_2$ concentration were $3\~57 ppb\;and\;18\~62 ppb$ and the differences among the green buffer zone, the industrial area and the residential areas were $0.7\~1.1 ppb$. Mean values of atmospheric concentrations of $NO_2$ were similar in industrial and, residential areas and the green buffer zone. Results of the study show that the effect of the green buffer zone on reducing the dispersion of air pollutants was very low. This study also recommends that micro-climate, i.e., wind direction should be considered as a factor for planning and design of green buffer zones.

대기확산모델의 검정 및 보정을 위한 Passive Sampler의 활용 (Application of Passive Sampler in Validation and Calibration of Air Dispersion Model)

  • 김선태;김주인;김성근;배장영
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 1999년도 추계학술대회 논문집
    • /
    • pp.170-171
    • /
    • 1999
  • 대기 중 오염물질의 확산 및 미래의 예측을 위하여 대기확산모형을 많이 사용하고 있으며, 국내에서 사용하고 있는 대기확산모형의 대부분은 미국 EPA에서 보급하는 것을 사용하고 있다. 이 중에서 최근에 많이 사용하고 있는 단기모형으로는 기간과 지형이 고려되는 ISCST3 모형을 들 수 있다. 국내 모델의 사용에 있어서 가장 중요한 문제점은 모델의 검정과 보정을 위한 data의 부재를 들 수 있다.(중략)

  • PDF

On the use of the wave finite element method for passive vibration control of periodic structures

  • Silva, Priscilla B.;Mencik, Jean-Mathieu;Arruda, Jose R.F.
    • Advances in aircraft and spacecraft science
    • /
    • 제3권3호
    • /
    • pp.299-315
    • /
    • 2016
  • In this work, a strategy for passive vibration control of periodic structures is proposed which involves adding a periodic array of simple resonant devices for creating band gaps. It is shown that such band gaps can be generated at low frequencies as opposed to the well known Bragg scattering effects when the wavelengths have to meet the length of the elementary cell of a periodic structure. For computational purposes, the wave finite element (WFE) method is investigated, which provides a straightforward and fast numerical means for identifying band gaps through the analysis of dispersion curves. Also, the WFE method constitutes an efficient and fast numerical means for analyzing the impact of band gaps in the attenuation of the frequency response functions of periodic structures. In order to highlight the relevance of the proposed approach, numerical experiments are carried out on a 1D academic rod and a 3D aircraft fuselage-like structure.