• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.338-345
• /
• 2000

A model testing has been performed to investigate the flow characteristics of a vortex chamber, which plays a role of a flow switch and passively controls the discharge flow rate. This method of passive flow control is a matter of concern in the design of advanced nuclear reactor systems as an alternative to the active flow control to provide emergency water to the reactor core in case of postulated accidents like LOCA (Loss-Of-Coolant Accident). By changing the inflow direction in the vortex chamber and varying the flow resistance inside the chamber, the vortex chamber can control passively the injection flowrate. Fundamental characteristics such as discharge flow rate and pressure drop of the vortex chamber are measured, and its parametric effects on the performance of the vortex chamber are also systematically investigated.

• 마이크로전자및패키징학회지
• /
• 제18권1호
• /
• pp.41-47
• /
• 2011

Currently, there is widespread adoption of silicon-based technologies for the implementation of radio frequency (RF) integrated passive devices (IPDs) because of their low-cost, small footprint and high performance. Also, the need for high speed data transmission and reception coupled with the ever increasing demand for mobility in consumer devices has generated a great interest in low cost devices with smaller form-factors. The UWB BPF makes use of lumped IPD technology on a silicon substrate CSMP (Chip Scale Module Package). In this paper, this filter shows 2.0 dB insertion loss and 15 dB return loss from 7.0 GHz to 9.0 GHz. To the best of our knowledge, the UWB band-pass-filter developed in this paper has the smallest size ($1.4\;mm{\times}1.2\;mm{\times}0.40\;mm$) while achieving equivalent electrical performance.

• 한국인터넷방송통신학회논문지
• /
• 제11권4호
• /
• pp.31-38
• /
• 2011

본 논문에서는 실내 전력소모를 효율적으로 줄이기 위하여, 무선센서네트워크 기반의 자율 실내조명 제어 시스템을 제안한다. 제안된 시스템에서는 먼저 출입문에 부착된 수동 적외선 (Passive Infrared: PIR) 센서를 이용하여 각 출입문을 통해 실내로 들어오고 나아가는 사람 수를 감지하다. 각 출입문에서 측정된 센서 값들은 무선센서네트워크를 통해 중앙 제어장치로 전송된다. 중앙제어장치는 전송된 센서 값을 이용하여 실내에 사람의 존재 유무를 파악할 수 있는 제어 알고리즘을 통해 실내조명을 자율적으로 제어 한다. 비용분석 및 시뮬레이션을 통해 제안된 시스템이 일상생활에 적용될 경우 약 20%의 전기소모를 절약할 수 있음을 보였다.

• 조명전기설비학회논문지
• /
• 제23권2호
• /
• pp.82-88
• /
• 2009

전력용 커패시터는 유도성 부하의 낮은 역률을 보상하기 위해 설치하는 경우가 많지만, 전력변환장치에서 발생하는 고조파를 줄이기 위해 수동형 필터로서 리액터와 함께 사용되는 경우도 있다. 수동형 필터는 커패시터와 리액터를 직렬로 연결하여 사용한다. 필터는 비선형 부하에서 발생하는 고조파를 흡수하는 역할을 하기 때문에 전압 및 전류 스트레스를 받아 소손 또는 열화되어 정상적인 수명을 보장받지 못하는 경우가 많다. 본 논문에서는 PWM 인버터의 전원측에 설치된 수동형 필터가 고조파를 저감할 때 받는 영향을 해석하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.669-672
• /
• 2004

The thin-film passivation technology using the poly-para-xylylene (parylene) was applied to polymer electroluminescent devices. The fabricated device shows a good luminescent characteristic of maximum 11640 cd/$m^2$. The measured lifetime was reached up to 28 hours, which means the effectiveness of the passivation. Applying the parylene thin-film passivation technique, 10${\times}$10 passive matrix display system was implemented and obtained some still images.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.406-407
• /
• 2009

In this paper, presents the Wilkinson power divider used integrated passive device (IPD) technology with excellent performance for personal communication services (PCS). The insertion loss of this power divider is 0.4 dB and the port isolation greater than 25 dB over the entire band. Return losses input and output ports are 18 dB and 19 dB, respectively. The power divider based on SI-GaAs substrate is designed within die size of about $0.775\times0.53\;mm^2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.50-51
• /
• 2009

This paper presents integrated passive device (IPD) based on Wilkinson power divider. The simulated 2-way power divider has the insertion loss of 3.123 dB, output isolation of -24.576 dB, input return loss of 26.415 dB, and output return loss of 33.478 dB. The power divider is based on IPD process design simulation at 2.5 GHz for WiMAX (Worldwide Interoperability for Microwave Access) applications. The chip size of power divider is $1\;\times\;1.2\;mm^2$, which is under fabrication.

• 한국소음진동공학회논문집
• /
• 제21권1호
• /
• pp.56-65
• /
• 2011

A new hybrid mount system is proposed for microvibration control in a high-tech factory. The mount consists of an airspring as a passive device and a piezostack actuator as an active device. The two devices are connected in series. Some numerical simulations and experimental tests are carried out to evaluate isolation performance of the mount system comprising of four proposed hybrid mounts. As a control logic, the specific algorithm is adopted for considering multiple target frequencies of excitation based on a Filtered-X LMS algorithm. The results are compared with isolation performance of the passive airspring mount system. It is confirmed that the proposed hybrid mount system has great performance on microvibration.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.166-172
• /
• 1995

A novel passive TE/TM polarization mode converter is fabricated by using poled polymer waveguides. The optic axis of the poling induced waveguide is slowly rotated by using a slowly varying structure of poling electrodes. Thus the polarization conversion is achieved as the guided mode propagates through the waveguide. The proposed device is simulated by a full vectorial beam propagation method (VBPM) for anisotropic medium. For the rotation length of 1 mm, the TE polarization of the guided mode is successfully converted to the TM polarization with negligible loss. Based on the simulation results, we fabricated the polarization converter which is tested by using 1.3 $\mu$m laser diode. TE to TM mode conversion is observed with a polarization extinction ratio higher than 30 dB, and the excess loss is less than 1 dB. The polarization conversion is relatively insensitive to wavelength since the device contains no periodic structures. These devices are easier to fabricate than others containing periodic structures.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1482-1483
• /
• 2008

This report describes the design, fabrication and experimental results of an implantable micro pressure regulator. It consists of three silicon substrates, a glass substrate, and a PDMS layer. Silicon and glass substrates are fabricated by using bulk micro machining and sandblasting. The PDMS layer is used as a intermediate layer for Si-Si and Si-glass bonding processes. This micro regulator is a key component of the portable drug delivery systems for low power consumption. The device has some advantages, such as a passive type device, no power consumption, and simple structure.