• Journal of the Korean Society of Safety
• /
• v.32 no.1
• /
• pp.75-81
• /
• 2017

A series of laboratory experiments has been performed in order to investigate the behavior of water-air two-phase flow in a horizontal pipe. A conductivity meter has been applied to detect the irregular alternation of air at the specific points in flows. The experimental condition has been established according to the water and air flowrates. Passing time, which is the time length for a measuring probe to pass through the entire length of a specific bubble, has been defined to evaluate the size of bubbles in the flow. Passing length, which can be considered as the equivalent value to bubble size and determined from the product of passing time and cross-sectional averaged velocity, and its corresponding occurrence frequency have been analyzed to classify the air flow patterns according to the condition of air and water fluxes. From the result, the dependancy of flow patterns on the variation of air-water flux ratio has been investigated and the existence of thresholds also checked for classifying the behavior of air in the flow.

• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.135-144
• /
• 2013

PURPOSES : The purpose of this paper is to develop a methodology to estimate level of service of arterial including Exclusive Median Bus Lanes. METHODS : On 6 Exclusive Median Bus Lanes routes in Seoul, bus travel time and number of bus-stop per km were investigated. Also whether or not passing lane exists at bus-stop was checked. Based on the data from sites, bus travel time was estimated according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. RESULTS : A bus travel time table was developed according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. After bus travel speed and passenger car travel speed is estimated based on each travel time table and length of segment, two speeds are combined with weighted average speed using traffic volume of each lane group. Then weighted average speed is a measure of effectiveness of arterial including Exclusive Median Bus Lanes. CONCLUSIONS : It can be concluded that the proposed methodology can estimate level of service of arterial including Exclusive Median Bus Lanes considering the operation characteristics of Exclusive Median Bus Lanes.

• Proceedings of the KOR-KST Conference
• /
• 1998.09a
• /
• pp.141-151
• /
• 1998

Provision of Passing Sight Distance (PSD) is an important component in two-lane highway design and has a critical impact on capacity of highway and safety of drivers. Many models have been developed to estimate PSD reasonably. However, each of them has a number of shortcomings for reflecting the real traffic conditions. This paper introduces a revised model that reflects the characteristics of the passing maneuver. The changes in passing sight distances under different assumptions about acceleration and vehicle length, which are related to vehicle types, are presented. The results obtained by the revised model are compared with those obtained from the existing models. There is an important link between geometric design decisions which determine the available sight distance and the quality of service which the road provides. In this paper, we examine one aspect of this relationship. That is to determine whether the passing sight distance is provided by improving horizontal alignment for a specific roadway section or passing may be restricted to save the road construction cost. To do so, a simple method for estimating traffic delay in no-passing is introduced.

• International Journal of Railway
• /
• v.1 no.4
• /
• pp.169-174
• /
• 2008

Experimental study has been conducted to clarify the internal and external pressure variation characteristics for KTX(Korea Train eXpress) passing through tunnel. Abrupt pressure variation gives rise to the ear-discomfort for passenger and fatigue for car body. In this study, the internal and external pressure variation are measured by using KTX real train experiment and on-board portable data acquisition system in Gyeongbu high speed commercial line. The tunnels from 200 m to 4000 m in length are chosen for the investigation of tunnel length effects. From the results of experiment, the internal pressure variation rate for all the test tunnels is lower than the standard criteria of 200 Pa/s. And, the critical tunnel lengths for pressure wave pattern are classified into 7 groups by using the theoretical L-t diagram analysis.

• Journal of the Korean Society of Visualization
• /
• v.19 no.1
• /
• pp.12-17
• /
• 2021

A three-dimensional slope valve component is used for controlling micro volume of liquid on a centrifugal force-based microfluidic disk platform, also called a lab-on-a-disk. The modeling factor of the slope valve component is determined to centrifugal force for liquid passing the crest of a slope valve via variation of slope length and angle as well as the radius to start point of slope valve. The centrifugal force is calculated by the equilibrium equation of the capillary and gravitational forces according to the microchannel surface roughness and the liquid volume, respectively. As a result, the slope valve is analyzed by the minimum angular velocity for liquid passing at crest point and the ratio between the length of micro liquid and slope length to obtain the factors for optimal slope angle modeling.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.71-78
• /
• 1999

The determination of the optimum biarc curve passing through a given set of points along involute curve is studied. The method adopted is that of finding the optimum number of span and the optimum length of the span such that error between the biarc curve and involute curve minimum. Iterative method is effectively used to find the optimim number and length of the span on involute curve with reduced length of NC-code.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.77-80
• /
• 2006

This study investigated filling performance of concrete which can pass between reinforcing bars and be fully filled, and examined fundamental properties of concrete which is before or after hardened state, in response to maximum size of coarse aggregate. This study was also originally intended to find out one of the method that can improve concrete quality, using crushed coarse aggregate. Test showed that passing ratio of concrete decreased as aggregate site increased and as space between reinforcing bars decreased. In addition concrete using bigger size of coarse aggregate exhibited slightly higher compressive strength and showed lower length change ratio of drying shrinkage.

• Journal of Power System Engineering
• /
• v.13 no.1
• /
• pp.19-25
• /
• 2009

This paper is a study on the link composition design of a double link type level luffing jib crane using path generation synthesis passing through three precision points according to parameters, the length of backstay, the ratio of fly jib length between two moving hinges to the total length of fly jib, the location of a intermediate passing point etc. when the maximum and minimum working radius of the crane are given. The performance of the crane depends on the deviation of the luffing trajectory at fly jib tip. The luffing trajectories according to the above parameters are analyzed and shown in graphs by the developed computer program. In a real-life design, some trials are needed to arrive at a proper link composition design. Therefore, it is expected that the present computer program can rapidly and exactly deal with a link composition design proper to the design criteria of the crane.

• Journal of the Korea Society for Simulation
• /
• v.26 no.3
• /
• pp.47-54
• /
• 2017

This paper analyzed the motion characteristics of two ships according to the ship's dimension using Ship Handling Simulator. When the panamax container ship passes the smaller ship, peak point and patterns of interaction forces for the moored ship are noticeable. Accordingly, special attention should be paid to the movements of moored ship because surge force and yaw moment changes in the opposite direction before and after condition of ship's beam. However, when the container ship passes the larger moored ship in reverse, peak point stood out on the passing ship at the beginning of ship-to-ship interaction and attraction force on the passing ship occurred steadily during 1L(length overall of passing ship) interval at a point of beam. In addition, as the lateral distance between the hull of two ships decreases less than 2B(breadth of passing ship), interaction forces on the passing ship at the beginning are sharply increase.

• Korean Journal of Human Ecology
• /
• v.11 no.1
• /
• pp.45-58
• /
• 2002

The purpose of this study was to offer a more functional slacks by analyzing its crotch length. The result of the study were as follows : Regarding the feeling of wearing and appearance, the P2 b style which measures the crotch length starting from the waist line passing around the iliac spine was the most highly evaluated. This suggested that the functionality of dance movement was more influenced by the position of the waist line not by the crotch length measurement. Since the front and rear center lines of the crotch could not be flown if the waist line of slacks was positioned high, both the crotch and abdominal part might be clogged or tightened when dancers made large dance movements or bended their upper bodies forward. In conclusion, slacks for more functional dance movement should be manufactured focusing on the location of the waist line rather than on the crotch length.