• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.192-198
• /
• 2019

We propose an emergency rescue support communication system to quickly rescue passenger ships, such as large cruise ships, when a ship sinks or a disaster such as a fire occurs. A beacon is installed in the inside of the vessel, and the position and the status of the passenger are detected in real time through the Bluetooth communication in the mobile terminal carried by the passenger and transmitted to the server. When an emergency occurs, the server sends information on the passenger to the rescue agency, informs the passenger of the emergency, and guides evacuation. As a result of simulations using the designed system, it was confirmed that the server immediately notifies all terminals when an emergency occurred in more than half of the area. This system, which detects the accident in real time and notifies all terminals in the vessel, unlike the existing system that notifies the position of the accident vessel or simply the position of the passenger in the vessel, will be helpful for the rapid evacuation and rescue of the passenger.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.36-37
• /
• 2018

This study is about the development of emergency response guidance according to the fire safety index in the fire safety module, which is one of the on-board remote monitoring system. In this paper divided the zones based on the location of the fire sensor for passenger ship which is one of the service passenger ships and developed on the emergency response guidance by the identified zones.

• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.345-352
• /
• 2000

Recently, it becomes to be very important to reduce the cabin noise of passenger ship, according to the trend of speedy and luxury ship. The noise reduction and control techniques should be considered as important factors from the viewpoint of the sound problem of cabin. Therefore, ship designer has to improve the sound quality as well as to redece the sound pressure level in cabins. In this paper, for the new approach of these problems, we tried to find the trends of noise and sound quality of high-speed coastal passenger ships. Loudness, roughness, fluctuation strength, and sharpness are selected as the parameters for the evaluation of sound quality. The parameters are calculated by using the sound measured in cabin while the ship is running. Furthermore we tried to find the trend of each parameter in cabins and compare with that of sound pressure level. As results, we find that the loudness is linearly proportional to sound pressure level. But, the other parameters show different trends which may be caused by ship motion on the wave and fluctuation of propelling power.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.05a
• /
• pp.135-140
• /
• 2001

In the last years there have been some severe accidents with passenger vessels. So, International Maritime Organization(IMO) has recognized that computer stimulation of the evacuation may be required for passenger vessels. Human elements is a key issues of escape analysis on shipboard. There are technical requirements to simulate of escape analysis for human elements. Technical requirements include model of ship structure, evacuation algorithm, human behaviour analysis and influence of ship listing/motion. This paper provides the key issues and technologies of simulation for human escape on shipboard.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1170-1177
• /
• 2008

The purpose of this study is to measure and analyze the indoor thermal conditions in the spring of a korean coastal passenger ship which is 590-passenger Ro-Pax type built at 1997. Especially this study has focussed on the relations between the diffuser open ratio, which can be controlled by 12 steps, and the comfort. Followings are the results of this study. (1) The supply air volume to cabins are maximum 4.3 and 2 times more than design quantity when the diffusers in cabins are open 100% and 50%, respectively. (2) Regardless of diffuser open ratio, the supply air maintains constantly high temperature and below 10% of relative humidity through the experimental days. (3) All the cabins are not satisfied with the ASHRAE comfort criterion at the condition of 100% and 50% of diffuser open ratio, because of high temperature and low relative humidity. (4) At a low diffuser open ratio, number of cabins which satisfy the ASHRAE comfort criterion are increased. (5) Humidifying and dehumidifying, and hvac control system of each cabin must be reviewed and studied at the view of passengers to service more comfort environments.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.444-449
• /
• 2001

There have been many accidents of passenger ships on the sea and they have caused a big loss of human lives. Maritime Safety Committee(MSC) of International Maritime Organization(IMO) made evacuation analysis of Ro-Ro passenger ships mandatory in order to save as many lives as possible at the time of accident. But this is a temporary regulation and HSC/IMO ties to introduce a performance-based regulation to improve the effect of regulation. Simulation-based evacuation analysis is the basis of performance-based regulation. In this paper, we performed a simulation-based evacuation analysis on a passenger ship, which is usually used in the plying between land and islands in Korea, with EXODUS system. Through inspecting the results from this analysis in more detail, we can make a proposal to improve the safety of passenger ship. Finally we describe the features of IMEX(Intelligent Model for Extrication Simulation), a new evacuation model being developed in KRISO.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.21-29
• /
• 2011

This paper examines the applicability of formal safety assessment to the passenger ships. This is followed by an analysis of passenger ship characteristics and a proposed formal safety assessment methodology. Five interlocking steps are described to construct a safety model including novel risk assessment, cost-benefit analysis and decision-making approaches. A case study is carried out in order to demonstrate the proposed methodology. Further development in formal safety assessment in the context of passenger ship safety is finally discussed in detail.

• Journal of Ship and Ocean Technology
• /
• v.3 no.4
• /
• pp.15-22
• /
• 1999

It is known that lubrication effect of an air cavity can reduced a drag of a ship. The present study intends to utilize the phenomena for the drag reduction of a passenger ship now operating in a lake. A scaled model of the model when air cavities are formed under the bottom of the model. Model experiments have been performed to determine adequate air supply rates, proper shapes and locations of air supply nozzles. It is shown that energy saving of mere than 10% can be achieved at the design speed of the ship even after excluding additional power consumed for air supplying. Multiple air supply nozzles, if allocated properly, are more effective than single one in resistance reduction of the ship.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.443-448
• /
• 2014

Recently, car-ferry passenger ships of navigating the coast area in the inside of our country are on an increasing trend of main engine power and the height of upper structure, which is increased to ship's speed and loading of large vehicles. The most ship with high-speed main engine is happened to excessive vibration by propeller induced excitation force on account of connecting the vibration of hull's girder and the upper structure by decreasing the shear stiffness and natural frequency for increasing the height of passenger deck. In this paper, By exchanging the propeller of alteration the number of blades, it could be keep to ship's speed and it's decreased the vibration of hull part that is located passenger deck on the upper deck, which is identified by countermeasure of protection against vibration to procure the safety ship's navigation through measuring the vibration of hull structure.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.341-342
• /
• 2018

Unlike previous studies on the optimum route of the ship operating on th ocean, this study proposed an optimization method for the route planning of the ship operating on the coast. In general, passenger ships on the coast navigate along the waypoints indicated in the authorized route. Therefore this study propose objective function considering the braking power and time to determine the speed between waypoints, and the optimum speed was determined by applying the proposed method to the actual route of the passenger ship between Mokpo and Jeju.