• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.17-24
• /
• 2013

On this study, we extracted pending problem and controversial point from management of disaster such as terror for domestic massive performance and then, investigated countermeasure plan against disaster for massive performance through comparison and analysis between anti-disaster strategy of Korea and U.S. U.S are conducting security system actively for passenger of major facilities such as public institution. Nonetheless, In U.S that has the world's best security system, serious affair such as 911 terror and Boston marathon terror are continued to happen. When considering domestic situation that North Korea and South Korea are antagonistic to each other, it is judged when it is high time to prepare for threat of terrorism. Accordingly, On this study, through analyzing of latest terror attacks in U.S and disaster risk in the nation, we analyzed in detail countermeasure plan classified as legislation, operation of security system, instilling a sense. As the result of this analyzing, using by flow-chart, we suggested domestic optimized disaster management system for massive performance. Consequently, we propose to establish systematized disaster management system such as preliminary survey of disaster influence for massive performance.

• 한국공간구조학회논문집
• /
• 제15권2호
• /
• pp.79-86
• /
• 2015

This study investigated the embedded depth of guardrail posts through 3-D soil material model and carried out evaluation of the dynamic performance of guard rail. In order to calculate for embedded depth of sloping ground, displacement of guardrail posts is analyzed according to the embedded depth of experiment variables. Through the static test of guardrail posts, the maximum deflection was found to decrease the interval. By performing the dynamic test using the Bogie Car, that is confirmed the elastic modulus of the soil occuring the maximum deflection. Guardrail posts is considered to need for further reinforcement in the larger slope than the plains. This study researched about maximum displacement and deviation velocity through dynamic performance of guardrail system and conducted analysis about protection performance evaluation of passenger.

• 자동차안전학회지
• /
• 제7권3호
• /
• pp.7-13
• /
• 2015

Occupant protection performance in frontal crashes has been developed and assessed for mainly front seat occupants over many years, and in recent years protection of rear seat occupants has also been extensively discussed. Unlike the front seats, the rear seats are often occupied by children seated in rear-facing or forward - facing child restraint systems, or booster seats. In the ENCAP, child occupant protection assessments using 18-month-old(P1.5) and 3-year-old(P3) test dummies in the rear seat have already been changed to new type of 18-month-old (Q1.5)and 3-year-old(Q3) test dummies. In addition, ENCAP are scheduled with the development and introduction of test dummies of 6-year-old (Q6) and 10.5-year-old children(Q10) starting 2016. In KNCAP, Q6 and Q10 child dummies will be introduced in 2017 as well. Automobile manufacturers need to develop safety performance for new child dummies closely. In this paper, we focused on Q6 and Q10 child dummies sitting in child restraint system. Offset frontal crash tests were conducted using two types of test dummies, Q6 and Q10 child dummies, positioned in the rear seat. Q6 and Q10 were used to compare dummy kinematics in rear seating positions between Q6 behind the driver's seat and Q10 behind the front passenger's seat. The full vehicle sled test results of both dummies were conducted with different restraint systems. It showed that several injury and image data was collected as the result of the full vehicle sled test. Based on the results of these investigations, this paper describes which factor is most important and combination is the best performance when evaluating rear seat occupant protection for Q6 and Q10 child dummies.

• 한국전산구조공학회논문집
• /
• 제24권5호
• /
• pp.499-506
• /
• 2011

본 연구에서는 컴퓨터 시뮬레이션을 통해 복합소재 교량용 방호울타리의 성능을 분석하였다. 복합소재 방호울타리는 SB4등급을 선정하였다. 복합소재의 적층을 고려하기 위해 LS-DYNA에서 제공하는 재료모델 MAT58을 사용하였다. 복합소재는 섬유와 수지의 종류 및 섬유의 방향에 따라 성능이 상이하다. 수지는 폴리우레탄, 섬유는 유리섬유를 사용하였다. 본 논문에서는 섬유의 방향성이 다른 3가지 적층 설계안에 대해서 충돌 시뮬레이션을 수행하여 성능을 비교 평가하였다. 실차충돌 실무 업무편람에 따라 구조적 강도성능, 탑승자 보호성능, 충돌 후 차량의 거동, 가드레일의 비산에 대한 성능 평가를 실시하였다. 그 결과 적층 설계의 횡 방향 섬유의 양이 많아질수록 충돌 시뮬레이션에서 더 좋은 성능을 나타내었다.

• 한국전산구조공학회논문집
• /
• 제23권2호
• /
• pp.175-182
• /
• 2010

본 연구에서는 복합소재 교량용 방호울타리를 개발하여 컴퓨터 시뮬레이션을 통해 강재 교량용 방호울타리와 복합소재교량용 방호울타리의 성능을 비교하였다. 구조적 강도 성능 측면에서, 복합소재 교량용 방호울타리의 경우 교량용 방호울타리의 변형이 17%로 감소하여 강재 교량용 방호울타리 보다 강도 성능이 우수하였다. 탑승자 보호 성능 측면에서, 복합소재 교량용 방호울타리는 THIV 47.1%, PHD 49.0%로 감소하여 강재 교량용 방호울타리 보다 탑승자 보호성능이 우수하였다. 충돌 후 차량의 거동 측면에서, 복합소재 교량용 방호울타리는 이탈속도가 증가하고 이탈각도가 감소하여 강재 교량용방호울타리 보다 충돌 후 차량의 거동이 우수하였다. 교량용 방호울타리의 비산 측면에서, 강재 및 복합소재 교량용 방호울타리는 비산이 발생하지 않았다.

• Wind and Structures
• /
• 제14권1호
• /
• pp.55-70
• /
• 2011

This study investigates the design criteria required for wind barriers to protect vehicles running on an expressway under a high side wind. At the first stage of this study, the lateral deviations of vehicles in crosswinds were computed from the commercial software, CarSim and TruckSim, and the critical wind speeds for a car accident were then evaluated from a predefined car accident index. The critical wind speeds for driving stability were found to be 35 m/s for a small passenger car, yet 30 m/s for a truck and a bus. From the wind tunnel tests, the minimum height of a wind barrier required to reduce the wind speed by 50% was found to be 12.5% of the road width. In the case of parallel bridges, the placement of two edge wind barriers plus one wind barrier at center was recommended for a separation distance larger than 20 m (four lanes) and 10 m (six lanes) respectively, otherwise two wind barriers were recommended.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1993년도 추계학술대회논문집
• /
• pp.243-251
• /
• 1993

With the recent issuance of a dynamic side impact test regulation in the Federal Motor Vehicle Safety Standard in the United States of America, many aspects of occupant protection in side impact crashes have been under investigation. Many investigations of real world accidents, crash test results and simulation studies have established that in side impact crashes of passenger cars, thoracic and pelvic injuries of occupant are, large part, caused by occupants' impact against the interior side of the vehicle, primarily the door. This paper is concerned with the development of a lumped mass computer model, which simulates the interaction of a struck car door and an adjacent seated occupant in side impacr, based CTP code which has been successfully used in vehicle and occupant simulation. New model developments include elimination of influence of vehicle side structure stiffness in the occupant injury responses. The model was used to investigated the effect of various door padding characteristics on occupant responses to improve vehicle safety performance. The evaluation of different crush properties of door padding have also focused to understand of behavior of impacted occupant. Results from simulations, The effects of both material coefficients $C_{f}$ and p were illustrated in terms of occupant injury criteria TTI and pelvis.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.171-176
• /
• 2016

본 논문은 도로안전시설물의 공용중 부식 발생으로 인한 기능 손실을 줄일 수 있는 방안으로 고내식성 용융합금도금 강판을 적용한 도로안전시설물을 제안한다. 고내식성 용융합금도금강판을 적용한 도로안전시설물 제품에 대한 신뢰성 있는 충돌성능 평가 기초자료를 제공할 목적으로 고내식강이 적용된 교량난간 제품에 대한 충돌 시뮬레이션 및 실물 차량 충돌시험 연구를 수행한다. 시뮬레이션 및 실차충돌 시험 결과, 변형률 속도 의존성을 고려할 수 있는 정교한 동특성 재료모델을 도입한 충돌 시뮬레이션을 통해 얻어지는 충돌 거동과 실물 차량 충돌 시험 결과가 매우 유사한 것으로 도출되었다. 본 논문에서 제안된 고내식성 용융합금도금 강판을 적용한 교량난간은 실물 차량 충돌 시험의 충돌성능 평가 기준을 모두 충족시켜 현장 적용을 앞두고 있다.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.163-170
• /
• 2000

Accident statistics shows that the portion of fatal occupant injuries due to side impacts is considerably high. The side impact usually leads to a severe intrusion of side structure into the passenger compartment. Furthermore, the safety zone for the side impact is relatively small compared to the front impact. Those kinds of physics for side impact frequently result in a fatal injury for the occupant. Therefore, NHTSA and EEVC are trying to intensify the regulation for the occupant protection against side impact. Both the regulation and recent market trends are asking for an installation of side airbag. There are several types of system configuration for side impact sensing. In this paper, we adopt the acceleration-based remote sensing method for the side airbag control system. We mainly focus on the development of hardware and crash discrimination algorithm of remote sensing unit. The crash discrimination algorithm needs fast decision of airbag firing especially for high-speed side impact such as FMVSS 214 and EEVC tests. It is also required to distinguish between low-speed fire and no-fire events. The algorithm should have a sufficient safety margin against any misuse situation such as hammer blow, door slam, etc. This paper introduces several firing criteria such as acceleration. velocity and energy criteria that use physical value proportional to crash severity. We have made a simulation program by using Matlab/Simulink to implement the proposed algorithm. We have conducted an algorithm calibration by using real crash data for 2,500cc vehicle. The crash performance obtained by the simulation was verified through a pulse injection method. It turned out that the results satisfied the system requirements well.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3911-3916
• /
• 2010

본 논문에서는 틸팅열차의 안전성 확보 및 운행효율 향상을 위해 "한국형 틸팅열차 신뢰성 평가 및 운용기술개발" 연구과제의 한 분야로 추진된 ATP 차상장치의 시운전시험에 대한 내용 및 결과를 제시하고 있다. 기존선의 속도 향상과 KTX 비수혜지역의 여객 서비스 향상을 위해 틸팅열차를 개발하였으며 개발된 틸팅열차의 신뢰성 평가를 위해 기존에 사용되고 있는 ATS 장치에 의한 12만 km 주행 시운전 시험을 진행하였다. KTX가 운행되지 않는 지역인 중앙선 및 충북선을 비롯한 6개 기존 노선을 200km/h 이상으로 고속화하기로 하였으며, 이에 따라 열차제어시스템은 기존의 ATS 장치에서 ATP 장치로 개량하여야 한다. 따라서 틸팅열차에도 ATP 차상장치를 설치하여 운행 적합성을 확인하여야 하기 때문에 경부선 및 호남선 ATP 구축사업에 사용된 것과 동일한 ATP 차상장치를 틸팅열차에 설치하여 시운전 시험을 수행하였으며 설치된 ATP 차상장치의 기능 및 성능이 틸팅열차의 운행에 적합함을 확인하였다.