• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.371-376
• /
• 2003

The objective of this paper is to compare the site-to-site variability of ISO 10844 pass-by-noise test sites. In order to investigate the site-to-site variance of test surfaces, European commercial tires are tested at seven different test sites. Three Korea test sites and four Europe test sites are selected.. The pass by noise test is executed according to a 2001/43/EC regulation. A]though the ISO surface has a very specific track composition, it does not reduce the variation of pass-by-noise measurements over the surface of test sites. This paper shows that the test results of pass-by-noise level are different depending on the test sites. The correlation obtained in this work is able to predict the pass by noise level for certain test site using the data measured from another test site. 17he prediction value is range with an error within 1dB(A).

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.116-121
• /
• 2005

The objective of this paper is to compare the site-to-site variability of ISO 10844 pass by the noise test sites. In order to investigate the site-to-site variance of test surfaces, European commercial tires are tested at seven different test sites. Three Korea test sites and four Europe test sites are selected. The pass by noise test is done according to a 2001/43/EC regulation. Although the ISO surface has a very specific track composition, it does not reduce the variation of pass by noise measurements over the surface of test sites. This paper shows that the test results of pass by noise level are different depending on the test sites. The correlation obtained in this work is able to predict the pass by noise level for certain test site using the data measured from another test site. The prediction value is range with an error within 1dB(A).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.462-465
• /
• 2014

It is well known that tire/road factors have a large influence on overall tire performance. In this paper, the basic study on the effects of tire/road factors on the pass-by noise performance of tire labeling has been carried out through experimental tests. The tire pass-by noise is affected by road characteristic factors, especially greatly influenced by road friction coefficient, and the next dominant factor is road chipping size. For several authorized pass-by noise test tracks, the pass-by noise correlation test has been done to know the test site effect, which results in 2~3dB(A) variation of pass-by noise level. Finally, it is shown that the winter tire is differently influenced by the pass-by noise test track characteristics, as compared to all-season tire and summer tire.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.871-875
• /
• 2001

Evaluation of the contribution of each pass-by noise source to the overall pass-by noise is an important issue for reduction of pass-by noise. A lead-wrapping test for analyzing pass-by noise of motorcycle is used to identify the principal noise sources of the pass-by noise in this study. Lead-wrapping test is employed and the contribution analysis is carried out. Based on the contribution analysis of each pass by noise source from the action of the prior tests, the design modifications of intake/exhaust systems were performed for reducing the pass-by noise. Finally, the pass-by noise test based on ISO362 was carried out to verify the noise reduction.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.219-226
• /
• 2002

Filtration performance of an automotive fuel filter was evaluated based on the theory of Beta ratio. This study also introduced the fuel components' contamination performance test stand incorporating the multi-pass filtration test circuit. The theoretical basis of multi-pass test and test procedure were described in detail. The specification of commercial fuel filter currently available was just the maximum pressure drop across the filter assembly and the holding capacity of contaminants. However, test results revealed that the fuel filter tested could not maintain consistent Beta ratio, that is filtration efficiency, although it had the holding capacity close to the specification. Hence the Beta ratio should be specified in service life. The results also showed that filtration system model should be refined including desorption ratio to estimate the variable Beta ratio in the test.

• 한국안광학회지
• /
• 제5권2호
• /
• pp.1-4
• /
• 2000

입체시 검사는 양안시 기능을 정확히 알 수 있는 것으로서 임상분야에서 많이 이용하고 있다. 본 연구의 목적은 조도와 검사거리의 차이에 의한 Random-dot E(RDE) 입체시 검사를 실시하였다. 조명이 증가할수록 RDE의 통과는 증가하였다. 한편 검사표적이 가까울수록 모든 피검자는 RDE를 통과하였다. 그러나 원거리에서 일부 피검자는 RDE를 통과하지 못하였다. 검사거리에 따라서 먼거리 표적일수록 RDE통과는 적었다. 결과적으로 RDE 입체시 검사는 검사거리와 조명에 영향을 받는다.

• 한국도로학회논문집
• /
• 제14권3호
• /
• pp.33-39
• /
• 2012

배수성 포장에 있어 기능적 평가인 투수성 실험과 더불어 소음저감 측정을 서울시에서 시공한 구간에서 실시하였다. 소음측정은 두 가지 방법을 이용하였는데 그 방법은 Pass-by 방법과 NCPX(Novel Close Proximity) 방법을 이용하였다. Passby 방법은 교통량에 따른 소음원이 전달되는 것을 측정하는 방법이고, NCPX는 타어어와 포장 표면간의 마찰음을 측정하는 방법이다. 현장투수시험을 위해서는 총 5개의 구간에서 실시하였으며 각 구간마다 주행부와 비주행부로 나뉘어 측정하였다. 3개 구간의 Pass-by 측정을 위해서는 교통소음원 발생점으로부터 인접한 곳에서 측정을 실시하였고 또한 공원내부 혹은 단지 내부에서도 소음을 측정하였다. 마지막으로 NCPX 측정은 4군데서 실시하였다. 결과적으로 배수성 포장의 기능인 투수성과 소음저감이 2, 3년 사이에서는 그 기능을 잘 유지함을 알 수 있었다.

• 대한한의학회지
• /
• 제33권1호
• /
• pp.148-159
• /
• 2012

Objectives: This study investigated the correlation among Postural Assessment Scale for Stroke (PASS), Timed "Up and Go" Test (TUG) and gait (velocity, cadence, step-length, stride-length and single-limb support). Methods: The 70 subjects were assessed on trunk control measured with the use of the PASS, dynamic balance (TUG) and gait function (by GAITRite). The data were analyzed using Pearson product correlation. Results: The PASS total scores were significantly correlated with PASS-M, PASS-C, and PASS-T (r =.80 ~ .88 p<.01). All items of the PASS were significantly correlated with TUG (r = -.63 ~ -.81 p<.01), velocity (r = .44~.58 p<.01), cadence (r =.38 ~.51. p<.01), affected side step length (r = .44 ~.56 p<.01) and affected side stride length (r = .45 ~.59 p<.01). But affected side single-limb support was lowly correlated with PASS-M, PASS-C, PASS-T and PASS-total (r = .25~.36 p<.05). Conclusions: Measures of trunk control were significantly related with values of dynamic balance and gait. Based on these results, trunk control is an essential core component of balance and gait. Trunk control training programs after stroke should be developed and emphasized.

• Structural Engineering and Mechanics
• /
• 제5권4호
• /
• pp.471-490
• /
• 1997

In this paper, the classical Irons' patch tests which have been generally accepted for the convergence proof of a finite element are performed for Mindlin plate bending elements with a special emphasis on the nonconforming elements. The elements considered are 4-node and 8-node quadrilateral isoparametric elements which have been dominantly used for the analyses of plate bending problems. It was recognized from the patch tests that some nonconforming Mindlin plate elements pass all the cases of patch tests even though nonconforming elements do not preserve conformity. Then, the clues for the Mindlin plate element to pass the Irons' patch tests are investigated. Also, the convergent characteristics of some nonconforming Mindlin plate elements that do not pass the Irons' patch tests are examined by weak patch tests. The convergence tests are performed on the benchmark numerical problems for both nonconforming elements which pass the patch tests and which do not. Some conclusions on the relationship between the patch test and convergence of nonconforming Mindlin plate elements are drawn.

• 소성∙가공
• /
• 제12권5호
• /
• pp.473-478
• /
• 2003

This study presents the enhancement of forgeability of SNCM522H materials. Target parts are output shaft(OP shaft) used as components of power train for automobiles. To carry out cold forging process of OP shaft by 1 pass instead of existing 2 pass process, studies in terms of process design and heat treatment were performed. To introduce the new process, the finite element method was accomplished, and to assess the validity of proposed heat treatment cycle, several experiments(hardness test, observation of optical microstructures, tensile test) were carried out. The 2Pass forging process could be reduced as lPass process through improvement of process and heat treatment technology and that would give cost reduction.