• 제목/요약/키워드: parts without parts

검색결과 1,396건 처리시간 0.028초

A Turnout without Movable Parts for Magnetically Levitated Vehicles with Hybrid Magnets

  • Kakinoki, Toshio;Yamaguchi, Hitoshi;Yoshinaga, Naoya;Mukai, Eiichi;Nishi, Hiroyuki
    • Journal of international Conference on Electrical Machines and Systems
    • /
    • 제3권3호
    • /
    • pp.312-316
    • /
    • 2014
  • This paper describes a turnout without movable parts for magnetically levitated vehicles with hybrid magnets, which have been studied by the authors in place of streetcars. Their low construction cost and low maintenance is key to their practical use. Magnetic levitation systems using forces of attraction can generate guidance force automatically, but the damping force against lateral motion is negligible. However, the lateral damping characteristic was improved by using divided iron type magnets and rails. Using this turnout without movable parts will facilitate smooth direction switching.

혼류 조립 라인에 batch 단위로 부품을 공급하는 단위 작업장의 생산계획 수립 (A batch scheduling scheme for the workcenters that supply parts to mixed-model assembly lines)

  • 백종관;백준걸;김성식
    • 한국경영과학회:학술대회논문집
    • /
    • 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
    • /
    • pp.369-372
    • /
    • 1996
  • The factory under this study consists of mixed-model assembly lines and workcenters which provide parts to the main lines. Parts produced by the workcenter have different specifications for different product models. The workcenters fabricate parts in batches, and they are divided into two types. A type 1 center supplies parts only to the main line that is designated to the center while type 2 center provides parts to all the main lines. The purpose of this study is to develop a scheduling scheme for the workcenter, and the main objective of the schedules is to provide parts for the main lines without delay. The facts that make the scheduling challengeable are that 1) the different models existing together on a main line request different parts, 2) the spaces for part inventories are limited and 3) set up times are sequence dependent and long in some cases. This study presents developed scheduling schemes for the type 1 center and explains the scheduling and control structure used.

  • PDF

소형 다각형 부품의 비센서 진동 정렬 (Sensorless Vibratory Orienting of Small Polygonal Parts)

  • 한인환
    • 제어로봇시스템학회논문지
    • /
    • 제12권11호
    • /
    • pp.1111-1118
    • /
    • 2006
  • This paper covers topics related to the investigations for the problem of sensorless vibratory orienting of polygonal parts with high probability through dynamic simulation. The author's program for mechanical systems with changing topologies was experimentally validated and was used as a simulation and design tool for motion behaviors of the vibratory parts-orienting system in the dynamic environment. A flat level vibrating bar is proposed as a means of orienting parts. Dynamic manipulation, in which a part is repeatedly caught and tossed by the bar without sensing, forms the fundamental manipulation strategy. This paper presents how to plan vibratory manipulation strategies that can orient a small rigid polygonal part using interaction between the part and the vibrating bar without requiring sensing. The planned motion strategies have been experimentally validated to show how the dynamic simulation can be used to find favorable vibration parameters for a given part without knowledge of their initial orientations.

동적 환경에서의 동시조달 수리부속품 재고수준 결정 (Determining the Current Spare Parts Level in a Dynamic Environment)

  • 우제웅;강맹규
    • 한국국방경영분석학회지
    • /
    • 제24권2호
    • /
    • pp.146-161
    • /
    • 1998
  • This article develops model of the nonstationary state behavior of the multiechelon spare parts provisioning systems. This study is concerned with a problem of determining the near optimal requirements level of the spare parts, especially Concurrent Spare Parts(CSP). CSP is supplied with the procurement of new equipment system, and is used to sustain the equipment without resupply during the initial coverage period. We consider this situation as a multiechelon inventory model with several bases and one depot. And we assume an equipment system which consists of many types of parts would grounded if one of the parts fail. Also this multiechelon CSP problem is considering the nonstationary poisson failure process and nonstationary exponential repair process in a dynamic environment. We develop an efficient computational procedure to find the near optimal number of spare parts minimizing the total expected cost, while achieving the required system availability. Finally we present a simple example of suggested method.

  • PDF

고정밀 신관 부품의 MIM 공정에 관한 연구 (A Research on the MIM Process of High-Precision Fuze Parts)

  • 서정화;강경훈
    • 한국군사과학기술학회지
    • /
    • 제15권3호
    • /
    • pp.231-240
    • /
    • 2012
  • During the past two decades, Metal Injection Molding(MIM) has become a very competitive technology to fabricate small, precise and complex-shaped parts in large quantities. In this research, the applicability of MIM technology in the mass-production of the high precision fuze parts to save manufacturing cost was investigated. The water-atomized 17-4PH stainless steel powder, one of the best corrosion-resistant high strength materials, was injection-molded into real-shape fuze part and flat tensile specimens. The injection-molded parts were thermally debound in hydrogen gas flow without solvent extraction. Sintering of the debound parts was carried out in vacuum at temperatures ranging from $1150^{\circ}C$ to $1370^{\circ}C$. The sintering behavior, mechanical properties, dimensional precision, corrosion resistance of the MIMed 17-4PH stainless parts were investigated. It was found that almost all the properties of the MIMed parts were comparable to those of the mechanically machined parts. Also, actual military field tests using both MIMed and mechanically machined fuze parts were performed as well and were found to be very successful.

장비 가용도를 고려한 최적 수리부품 재고수준 결정 (Determining the Optimal Spare Parts Level Considering Equipment Availability)

  • 우제웅;강맹규
    • 산업경영시스템학회지
    • /
    • 제21권47호
    • /
    • pp.87-99
    • /
    • 1998
  • This study is concerned with a problem of determining the optimal requirements level of the spare parts, especially Concurrent Spare Parts(CSP). CSP is supplied with the procurement of new equipment system, and is used to sustain the equipment without resupply during the initial coverage period. We consider this situation as a multiechelon inventory model with several bases and one depot. And we assume a equipment system which consists of many types of parts would grounded if one of the parts fail. Also this multiechelon CSP problem is considering a time-varing (dynamic) environment. We develop a computational procedure to find the optimal number of spare parts minimizing the total expected cost, while achieving the required system availability. Finally we present a simple example of suggested method.

  • PDF

해양구조물용 RE36강의 용접부 부식거동에 관한 전기화학적 특성 연구 (An Electrochemical Property Stud on the Corrosion Behavior of Welding Part of RE36 Steel for Marine Structure)

  • 김성종;김진경;문경만
    • Journal of Welding and Joining
    • /
    • 제18권5호
    • /
    • pp.70-76
    • /
    • 2000
  • The effect of Post Weld Heat Treatment(PWHT) of RE36 steel for marine structure was investigated with parameters such as micro-vickers hardness, corrosion potential and corrosion current density of weld metal(WM), base metal(BM) and heat affected zone(HAZ), and both Al alloy anode generating current and Al alloy anode weight loss quantity etc. Hardness of post-weld heat treated BM, WM and HAZ is lower than that of As-welded condition of each region. However, hardness of HAZ was the highest among those three parts regardless of PWHT temperature and corrosion potential of WM was the highest among those three parts without regard to temperature and corrosion potential of WM was the highest among those three parts without regard to PWHT temperature. The amplitude of corrosion potential difference of each other three parts at PWHT temperature $550^{\circ}C$, $650^{\circ}C$ are smaller than that of three parts by As-welded condition and corrosion current density obtained by PWHT was also smaller than that of As-welded condition. Eventually, it was known that corrosion resistance was increased by PWHT. However both Al anode generating current and anode weight loss quantity were also decreased by PWHT compare to As-welded condition when RE36 steel is cathodically protected by Al anode. Therefore, it is suggested that the optimum PWHT temperature with increasing corrosion resistance and cathodic protection effect is $550^{\circ}C$.

  • PDF

자동차부품 추천을 위한 태스크 온톨로지 기술의 적용방법 (Application Method of Task Ontology Technology for Recommendation of Automobile Parts)

  • 김귀정;한정수
    • 디지털융복합연구
    • /
    • 제10권6호
    • /
    • pp.275-281
    • /
    • 2012
  • 본 연구는 태스크 온톨로지를 이용한 자동차부품 추천시스템 개발 방법을 제안하였다. 제안한 지능형 추천 시스템은 자동차 부품 조립과정을 학습하도록 하였으며, 자동차부품 추천을 위하여 부품들을 온톨로지 방법으로 구축하였다. is-a Relationship 기반 hierarchical Taxonomy를 이용하여 자동차 엔진을 구성하고 있는 각각의 부품들 사이의 관계를 설정하였다. 각각의 부품은 자동차 전문가의 지식에 의해 각기 다른 가중치 값을 가지고 있게 된다. 가중치는 자동차 추천시스템의 사용자들이 직접 사용하면서 선택한 횟수와 가중치의 곱 연산을 이용한 결과 값을 시스템 내에서 기록하여 순서를 작성하고 결과적으로 우선순위(priority)가 높은 순서부터 사용자에게 출력함으로써 어느 부품의 어느 요소가 중요한지 쉽게 파악할 수 있도록 하였다. 자동차부품 지능형 추천시스템은 사용자가 쉽게 접근하기 어려운 자동차 부품관련 부분을 생성된 데이터를 바탕으로 임의의 부품을 선택했을 때 해당 부품과 밀접한 관계를 가진 부품을 표현하여 특별히 전문적인 지식 없이도 손쉽게 자동차 부품의 조립 및 쓰임새와 중요성을 알 수 있게 해주는 시스템이다.

신속시작작업에서 2차원 단면데이터를 이용한 3차원 물체의 최적자동배치를 위한 알고리즘의 개발 (Optimal 3-D Packing using 2-D Slice Data for Multiple Parts Layout in Rapid Prototyping)

  • 허정훈;이건우;안재홍
    • 한국CDE학회논문집
    • /
    • 제2권3호
    • /
    • pp.195-210
    • /
    • 1997
  • In Rapid Prototyping process, the time required to build multiple prototype parts can be reduced by packing several parts optimally in a work volume. Interactive arrangement of the multiple parts is a tedious process and does not guarantee the optimal placement of all the parts. In this case, packing is a kind of 3-D nesting problem because parts are represented by STL files with 3-D information. 3-D nesting is well known to be a problem requiring an intense computation and an efficient algorithm to solve the problem is still under investigation. This paper proposes that packing 3-D parts can be simplified into a 2-D irregular polygon nesting problem by using the characteristic of rapid prototyping process that the process uses 2-dimensional slicing data of the parts and that slice of the STL parts are composed of polygons. Our algorithm uses no-fit-polygon (NFP) to place each slice without overlapping other slices in the same z-level. The allowable position of one part at a fixed orientation for given parts already packed can be determined by obtaining the union of all NFP's that are obtained from each slice of the part. Genetic algorithm is used to determine the order of parts to be placed and orientations of each part for the optimal packing. Optimal orientation of a part is determined while rotating it about the axis normal to the slice by finite angles and flipping upside down. This algorithm can be applied to any rapid prototyping process that does not need support structures.

  • PDF

SCM440강 용접부의 내식성에 미치는 용접후 열처리효과에 관한 전기화학적 연구 (Electrochemical Study on the Effect of Post-Weld Heat Treatment Affecting to Corrosion Resistance Property of the Weldment of SCM440 Steel)

  • 김성종;김진경;김종호;김기준;김영식;문경만
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제24권6호
    • /
    • pp.78-88
    • /
    • 2000
  • The effect of post-weld heat treatment(PWHT) of SCM440 steel was investigated with parameters such as micro-Vickers hardness, corrosion potential, polarization behaviors, galvanic current, Al anode generating current and Al anode weight loss, etc. Each hardness of three parts(HAZ, BM, WM) by PWHT is lower than each of as-welded parts. However, hardness of WM area was the highest among those three parts in case of both PWHT and as-welded. Corrosion potential of WM part was the highest among those three parts and WM area was also acted as cathode without regard to PWHT. The magnitude of corrosion potential difference among three parts by PWHT was larger than that of three parts of as-welded, and corrosion current by galvanic cell of these three parts by PWHT was also larger compared to as-welded. Therefore, it is suggested that corrosion resistance property of SCM440 steel is decreased by PWHT than as-welded. However, both Al anode generating current and anode weight loss were also increased by PWHT compared to as-welded when SCM400 steel is cathodically protected by Al anode.

  • PDF