• 제목/요약/키워드: partitioning parameter

검색결과 33건 처리시간 0.02초

식품 성분과 식품 포장용 인쇄 잉크 용매의 화학적 구조가 분배작용에 미치는 영향 (Effect of chemical and physical structure on partitioning behavior of representative printing ink solvents and various food ingredients)

  • 안덕준
    • 한국포장학회지
    • /
    • 제10권1호
    • /
    • pp.7-14
    • /
    • 2004
  • Migration behavior of selected solvents and food samples showed differences of the chemical structures and polarities, the food samples which have similar polar expresses more higher affinity than different polar degrees. Water which is polar has a highest partitioning coefficient values on polar isopropanol, and oil which is nonpolar has highest partitioning value on non-polar toluene. The increasing order of partitioning values was accord with increasing water contents in food samples. It is showed that the wheat flour with 13.2% moisture content has the highest partitioning coefficient values on the isopropanol with -OH. Kp value of sugar showed remarkable lower partitioning coefficient values than other food samples due to high degree crystallinity. This phenomenon can be predictable with ${\delta}$ values, because order of partitioning coefficient values which comes out through the experiment and the sequence of Hildebrand solubility parameter value difference between food sample and printing ink solvent correspond almost. This Hildebrand solubility parameter value can be easily applied to the food package industry because the effect of food-safety can be considered without passing through complicated steps by using this method.

  • PDF

Partitioning Behavior of Selected Printing Ink Solvents between Headspace and Chocolate Cookie Samples

  • An, Duek-Jun
    • Preventive Nutrition and Food Science
    • /
    • 제16권3호
    • /
    • pp.267-271
    • /
    • 2011
  • Static Headspace Gas Chromatographic analysis was used to study the partitioning behavior of five organic printing ink solvents between chocolate cookie/air systems. Three cookie sample formulations varied with respect to chocolate type and overall percentage of constituents. Major considerations involved differences in fat content and type and resulting variability in chemical and physical structure. Each of the solvents studied (ethyl acetate, hexane, isopropanol, methyl ethyl ketone, toluene) represents a general class of printing ink solvents based on predominate functional group. Values of the partitioning coefficient (Kp) were determined at equilibrium using measured quantities of both solvent and cookie sample in closed systems at temperature of 25, 35, and $45^{\circ}C$. In each of the three cookies at the three test temperatures, toluene always exhibited the greatest value of partitioning to cookie and hexane always exhibited the least. Results also showed that the partitioning behavior of solvents is generally inversely related to temperature and that solvent affinity, though constant for a particular cookie type over all test temperatures, varies significantly among the three cookie types. The preference of each of the five solvents for each cookie sample was also found to vary with temperature. No correlation was found between the extent of partitioning and cookie formulation or physical characteristic of solvent. The Hildebrand parameter, related to ${\Delta}Hmix$ (heat of mixing), may be used to describe differences in partitioning based on the overall potential of a solvent/cookie interaction to occur. The potential for interaction is dependent upon the chemical structure of the cookie sample and thus the availability of 'active-sites' required for a given solvent.

Interactive Effect of Food Compositions on the Migration Behavior of Printing Ink Solvent

  • An, Duek-Jun
    • Preventive Nutrition and Food Science
    • /
    • 제14권4호
    • /
    • pp.310-315
    • /
    • 2009
  • The partitioning behavior of the five printing ink solvents in nine lab-made cookies with various sugar and water content at 25${^{\circ}C}$ was studied to find out the presence and effects of interaction between the two ingredients on partitioning behavior in cookies. Solvents were ethyl acetate, hexane, isopropanol, methyl ethyl ketone and hexane. It was observed that the partition coefficient (the solvent concentration in food compared to that in air, Kp) decreased as sugar increased in all case and increased as water content increased for all compounds except toluene. Statistical analysis by the F-test method was used to determine the significance of sugar-water interactions, as well as other single factors on partitioning behavior of each solvent. Sugar content alone had no significant effects, but the crystallinity of sugar, as changed by water content, affected the partitioning behavior of the five solvents significantly. Parameter estimation for each significant factor by SAS program yielded a regression equation, which was used to predict the partitioning behavior in the finished cookie. Kp values from the regression equation could be determined more precisely by applying a correction term for the interaction between sugar and water to the Kp values of each ingredient after baking.

In situ measurement-based partitioning behavior of perfluoroalkyl acids in the atmosphere

  • Kim, Seung-Kyu;Li, Donghao;Kannan, Kurunthachalam
    • Environmental Engineering Research
    • /
    • 제25권3호
    • /
    • pp.281-289
    • /
    • 2020
  • Environmental fate of ionizable organic pollutants such as perfluoroalkyl acids (PFAAs) are of increasing interest but has not been well understood because of uncertain values for parameters related with atmospheric interphase partitioning behavior. In the present study, not only the values for air-water partition coefficient (KAW) and dissociation constant (pKa) of PFAAs were induced by adjusting to in situ measurements of air-water distribution coefficient between vapor phase and rainwater but also gas-particle partition coefficients were also estimated using three-phase partitioning model of ionizable organic pollutants, in situ measurements of PFAAs in aerosol and air vapor phase, and obtained parameter values. The pKa values of PFAAs we obtained were close to the minimum values suggested in literature except for perfluorooctane sulfonic acids, and COSMOtherm-modeled KAW values were assessed to more appropriate among suggested values. When applying parameter values we obtained, it was predicted that air particle-associated fate and transport of PFAAs could be negligible and PFAAs could distribute ubiquitously along the transection from urban to rural region by pH-dependent phase transfer in air. Our study is expected to have some implications in prediction of the environmental redistribution of other ionizable organic compounds.

대규모 연결계의 분산상태관측기 설계 (Design of Decentralized State Observer for Large Scale Interconnected System)

  • 이기상;장민도
    • 대한전기학회논문지
    • /
    • 제37권2호
    • /
    • pp.122-129
    • /
    • 1988
  • A design method of decentralized state observer for large scale interconnected systems is proposed by the use of interconnection rejection approach and interconnection modelling technique. The proposed design method is developed based on the interconnection partitioning. Therefore partitioning conditions are suggested. And the conditions for observer pole assignment and observer parameter determination procedures are described for possible interconnection patterns. The decentralized state observer gives good estimates without any information on the interconnection variables and estimations. In addition, a numerical example is given to explain the design procedures and to show the estimation performance of the decentralized observer.

  • PDF

멀티미디어 이동 통신에서 Hybrid Joint 주파수 재사용 구간을 이용한 동일 채널 간섭 억제 및 시스템 전송량 최대화 방법 (Co-Channel Interference Mitigation and System Throughput Maximization Using Hybrid Joint Reuse Partitioning in Multimedia Mobile Communications)

  • 김정수
    • 한국전자파학회논문지
    • /
    • 제18권5호
    • /
    • pp.465-470
    • /
    • 2007
  • 멀티미디어 이동 통신에서 동일 채널 간섭은 시스템의 성능을 저하시키는 중요한 요인이다. 본 논문에서는 이러한 동일 채널 간섭을 억제하고 시스템의 성능을 최대화하기 위하여 주파수 재사용 구간을 사용한다. 먼저 수학적 모델링을 통하여 주파수 재사용 구간을 적용한 시스템에서의 동일 채널 간섭량을 분석한다. 이를 바탕으로 시스템 전송량을 최대화 시킬 수 있는 주파수 재사용 구간을 결정한다. 마지막으로 분석 결과와 모의 실험 결과를 통하여 주파수 재사용 구간을 적용한 시스템이 동일 채널 간섭량을 줄이며 시스템 전송량을 최대화 시킬 수 있음을 보인다. 실험 결과를 통하여 셀의 트레픽 로드에 따라서 재사용 구간이 $0.7{\sim}0.8$의 구간에서 시스템 전송량이 최대화 되며, 셀룰러 시스템 디자인 변수로 이와 같은 결과를 이용하면 시스템 전송량을 최대화 할 수 있다.

Comparative Study of Quantitative Data Binning Methods in Association Rule

  • Choi, Jae-Ho;Park, Hee-Chang
    • Journal of the Korean Data and Information Science Society
    • /
    • 제19권3호
    • /
    • pp.903-911
    • /
    • 2008
  • Association rule mining searches for interesting relationships among items in a given large database. Association rules are frequently used by retail stores to assist in marketing, advertising, floor placement, and inventory control. Many data is most quantitative data. There is a need for partitioning techniques to quantitative data. The partitioning process is referred to as binning. We introduce several binning methods ; parameter mean binning, equi-width binning, equi-depth binning, clustering-based binning. So we apply these binning methods to several distribution types of quantitative data and present the best binning method for association rule discovery.

  • PDF

Flexible Partitioning of CDFGs for Compact Asynchronous Controllers

  • Sretasereekul, Nattha;Okuyama, Yuichi;Saito, Hiroshi;Imai, Masashi;Kuroda, Kenichi;Nanya, Takashi
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -3
    • /
    • pp.1724-1727
    • /
    • 2002
  • Asynchronous circuits have the potential to solve the problems related to parameter variations such as gate delays in deep sub-micron technologies. However, current CAD tools for large-scale asyn-chronous circuits partition specification irrelevantly, because these tools cannot control the granularity of circuit decomposition. In this paper we propose a hierarchical Control/Data Flow Graph (CDFG) containing nodes that are flexibly partitioned or merged into other nodes. We show a partitioning algorithm for such CDFGs to generate handleable Signal Transition Graphs (STGs) for asynchronous synthesis tools. The algorithm a1lows designers to assign the maximum number of signals of partitioned nodes considering of timality. From an experiment, this algorithm can flexibly partition and result in more compact asynchronous controllers.

  • PDF

다물체의 기구해석 및 동적거동해석을 위한 오일러 매개변수의 교정방법 (An Euler Parameter Updating Method for Multibody Kinematics and Dynamics)

  • 김성주;배대성;최창곤;양성모
    • 한국자동차공학회논문집
    • /
    • 제4권4호
    • /
    • pp.9-17
    • /
    • 1996
  • This paper develops a sequential updating method of the Euler parameter generalized coordinates for the machine kinematics and dynamics, The Newton's method is slightly modified so as to utilize the Jacobian matrix with respect to the virtual rotation instead of this with repect to the Euler parameters. An intermediate variable is introduced and the modified Newton's method solves for the variable first. Relational equation of the intermediate variable is then solved for the Euler parameters. The solution process is carried out efficiently by symoblic inversion of the relational equation of the intermediate variable and the iteration equation of the Euler parameter normalization constraint. The proposed method is applied to a kinematic and dynamic analysis with the Generalized Coordinate Partitioning method. Covergence analysis is performed to guarantee the local convergence of the proposed method. To demonstrate the validity and practicalism of the proposed method, kinematic analysis of a motion base system and dynamic analysis of a vehicle are carried out.

  • PDF

개념적 수문분할모형의 보정에 미치는 수문기후학적 조건의 영향 (Effects of Hydro-Climate Conditions on Calibrating Conceptual Hydrologic Partitioning Model)

  • 최정현;서지유;원정은;이옥정;김상단
    • 한국물환경학회지
    • /
    • 제36권6호
    • /
    • pp.568-580
    • /
    • 2020
  • Calibrating a conceptual hydrologic model necessitates selection of a calibration period that produces the most reliable prediction. This often must be chosen randomly, however, since there is no objective guidance. Observation plays the most important role in the calibration or uncertainty evaluation of hydrologic models, in which the key factors are the length of the data and the hydro-climate conditions in which they were collected. In this study, we investigated the effect of the calibration period selected on the predictive performance and uncertainty of a model. After classifying the inflows of the Hapcheon Dam from 1991 to 2019 into four hydro-climate conditions (dry, wet, normal, and mixed), a conceptual hydrologic partitioning model was calibrated using data from the same hydro-climate condition. Then, predictive performance and post-parameter statistics were analyzed during the verification period under various hydro-climate conditions. The results of the study were as follows: 1) Hydro-climate conditions during the calibration period have a significant effect on model performance and uncertainty, 2) calibration of a hydrologic model using data in dry hydro-climate conditions is most advantageous in securing model performance for arbitrary hydro-climate conditions, and 3) the dry calibration can lead to more reliable model results.