• 한국주조공학회지
• /
• 제17권2호
• /
• pp.164-169
• /
• 1997

Mechanical properties of aluminum-matrix composites, fabricated by dispersion of fine SiC particulates of which size was less than 1 ${\mu}m$ into 2024 and 7075 aluminum alloys, have been investigated. Homogeneous mixing between the matrix and SiC particulates could be achieved by jar milling for 8 hours with appropriate processing agent. At temperatures below 473K, high-temperature tensile strength of the composites was higher than that of the 2024 and 7075 aluminum alloys which were used as matrix materials. However, tensile strength of the composites was approximated to that of the matrix materials at 573K. Thus, it could be suggested that effects of particle dispersion on tensile strength of aluminum alloys was diminished at temperatures higher than 573K.

• 한국대기환경학회지
• /
• 제13권4호
• /
• pp.297-305
• /
• 1997

The experimental study by use of SPCP was fulfilled to remove toluene emitted from various industrial processes. First of all, discharge characteristic was experimented as the change of applied voltage and frequency. Then toluene removal characteristic was tested with the analysis of by-products. As a result, optimum electrical discharge condition was from 20.0 kHz to 25.0 kHz of frequency and from 3.5 kV to 4.0 kV of voltage range. The variation of applied voltage had a more important effect on the removal characteristic of toluene than the frequency variation. The toluene removal efficiency was proportioned to ozone concentration and retention time on discharge plate. It was dropped as increase of toluene concentration, but total treated volume of tolene per power consumption was high. The decomposed toluene was transformed to $CO, CO_2$ and particulates, and the rate of transformation to particulates was higher than CO and $CO_2$ at high toluene concentration. Particulates were increased from 0.017 $\mum$ to 0.3 $\mum$ range of size distribution.

• Bulletin of the Korean Chemical Society
• /
• 제22권6호
• /
• pp.616-622
• /
• 2001

Split-flow thin (SPLITT) cell Fractionation(SF) is a technique that allows separation of particulates and macromolecules into two fractions. A gravitational SF(GSF) system is constructed and tested for its applicability for separation of dust and ground water particulates. When tested with polystyrene latex particles, experimental data were in good agreements with theory. The 9.8 and 21.4㎛ polystyrene particles were successuflly separated in a continuous mode, where the mixture is continuously fed into the GSF channel allowing separation in a large sacle. The GSF system is successfully applied to continuous separation of dust and ground water particels based on the sedimentation coefficient, which is closely related to the particle size. The separations were confirmed by microscopy and energy-dispersive X-ray (EDX) analysos.

• 한국산업보건학회지
• /
• 제11권2호
• /
• pp.145-152
• /
• 2001

This study was performed to evaluate the coke oven emissions (COE) and polynuclear aromatic hydrocarbon levels in coke manu-facturing industry, secondary lead smelting industry and glass bottle manufacturing industry. 1. There were no significant difference between the means of personal samples and area samples by the types of industry(p>0.05). The levels of airborne total particulates of the secondary lead smelting industry was the highest($2.30mg/m^3$), and those of the coke manu-facturing industry and glass bottle manu facturing industry were $1.95mg/m^3$ and $1.37mg/m^3$. The concentration of COE was the highest in the glass bottle manufacturing industry($0.79mg/m^3$), and in order of $0.19mg/m^3$ in the coke manufacturing industry and $0.06mg/m^3$ in the secondary lead smelting industry. COE/total particulates(%) was highest in the glass bottle manufacturing industry(58.1%) and in order of 10.3% in the coke manufacturing industry and 3.1% in secondary lead smelting industry. There were significant differences in the total particle concentration and COE by the types of industry(p<0.05). 2. The levels of airborne total particulates was the highest at the smelting process of secondary lead smelting industry($2.30{\pm}0.72mg/m^3$), and the lowest at the smelting process of glass bottle manufacturing industry ($0.99{\pm}1.22mg/m^3$) Concentration of COE was the highest at the casting process of glass bottle manufacturing industry ($1.09{\pm}1.15mg/m^3$), the lowest at the smelting process of secondary lead smelting industry ($0.06{\pm}0.03mg/m^3$). The COE/total particulates(%) was the highest at the casting process of glass bottle manufacturing industry($65.9{\pm}20.5%$), and the lowest at the smelting process of secondary lead smelting indusry($3.1{\pm}2.7%$). 3. There were positive correlations between level of The airborne total particulates and concentration of COE in coke manufacturing industry and glass bottle manufacturing industry (p<0.05), but negative correlation in secondary lead smelting industry. 4. The numbers of case and rates that over the Threshold Limit Values(TLVs) were 24 (77.4%)cases in glass bottle manufacture, 14(23.7%) cases in the coke manufacturing industry and no one case in secondary lead smelting industry. Total numbers of case and rates that over TLVs were 38( 35.5%) cases. 5. The limit of detection(LOD) for PAH was $10{\mu}g/ml$ in standard sample. All PAH levels of the cokes manufacturing industry and the secondary lead smelting industry and the glass bottle manufacturing industry were trace or not to detect.

• 한국환경과학회지
• /
• 제2권3호
• /
• pp.217-225
• /
• 1993

This study was performed at Sa-Sang Industrial area in Pusan City. To measure the total suspended particulates(T.S.P) and $SO_3$ following places was selected industrial area, down town, residentail area. T.S.P was collected on glass filters by High-Volume Air Sampler, $SO_3$ was measured by PbO2 Candle method. The collected T.S.P was analyzed for various anlon(for example, $NO_3$, $SO_4$, $PO_4$, F, Cl) by ion Chromatography, and Pb by Inductively Coupled Plasma.

• Bulletin of the Korean Chemical Society
• /
• 제15권12호
• /
• pp.1045-1049
• /
• 1994

A simple and fast ion chromatographic method is developed for the determination of transition metals such as Fe, Cu, Ni, Zn and Co in atmospheric particulates. The method involves acid digestion, on-column preconcentration, and subsequent ion chromatogaphic detection. The precision of the method is less than 3${\%}$ RSD at parts per billion level for the metals studied. No significant interferences are observed. The results obtained with this method agree well with those by ICP-AES.

• 한국대기환경학회지
• /
• 제5권1호
• /
• pp.68-78
• /
• 1989

The heavy metal of suspended particulates with human health has long been studied in environmental interest concerned. This study was intended to identify harmful heavy metals of the ambient air borne dusts which were related with the respirable sizes in the aerodynamics. Two sampling sites were selected comparatively; one was in the Shinchon area, which is the commercial district with heavy traffic and the other site was in the Bulgwang area which is residential area. The supended particulates were sampled by high volume air sample with 6 cascade impactor stages. The heavy metals in terms of As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Se, V and Zn were determined by stomic absorption spectrometry or inductively coupled plasma emission spectrometry. The samples weretaken bimothly for seven consecutive days from May 1987 to March 1988. The annual average concentration of the respirable suspended dust of which diameter is less than 10$\mum$ was 152.59 $\mug/m^3$ of the Shinchon air samples; the respirable dust was equivalent to approximately 85% of the total suspended particulates. The annual average concentration of the respirable suspended dust of the Bulgwang air samples was 112.56 $\mug/m^3$; that was approximately 86% of the total suspended particulates. The concentration of heavy metals was investigated in relation to the particle size. The concentration of Cr, Fe, Mn and V were tended to be much more in the coarse particles than in the fine particles. Cd and Pb in the fine particles were more than in the coarse particles. In the partial correlation coefficients; in the Shinchon area, high correlations among Fe, Se and Mn were determined; it is assumed that those sources would be originated from coal, gasolineand diesel. In Bulgwang area, would be high correlation among Fe, Se, Hg and Mn considered to be originated from coal, Bunker-C and heavy oil as well. From the above results, the hazardous heavy merals in air should be measured and controlled in originally their sources.

• 한국대기환경학회지
• /
• 제14권6호
• /
• pp.577-588
• /
• 1998

Polycyclic aromatic hydrocarbons (PAHs) are products of incomplete combustion and, in urban area atmosphere, are mainly traffic or heating in origin. Size-segregated aerosol samples were collected on the Eixth story of Shinchon on the Yonsei campus, using a high-volume cascade impactor, between August 1994 and September 1995. Ten PAHs were analyzed by GC/MSD. The size distribution of PAH-containing particulates followed approximately a log-normal relationship with the majority of PAH content associated with particles below 3.0mm. PAHs concentration in submicron particles increased during the winter months. The Mass Median Diameter (MMD) value of annual particulates in the heavy traffic area of Shinchon shows about 1.6 pm. The MMD values of air particulate in winter were the lowest values and similar to that in summer, while MMD values of seasonal PAHs were generally lower than 1.0 pm. Among the PAHs, MMD values of PAHs with the more than 5 benzen ring were averagely lower than those with 4 benzin rings. Especially MMD's of dibenzo (a, h) anthracene in winter was clearly lower than in summer. This reason may be caused by fuels used for heating. In this area, 50∼80% PAHs mass was particles smaller than 1.0mm aerodynamic diameter in size range, and the MMD values of PAHs lower than those of other country's area.

• 한국분말재료학회지
• /
• 제5권3호
• /
• pp.184-191
• /
• 1998

The fabrication process and properties of SiC particulate preforms with high volume fraction above 50% were investigated. The SiC particulate preforms were fabricated by vacuum-assisted extraction method after wet mixing of SiC particulates of 48 ${\mu}m$ in diameter, $SiO_2$ as inorganic binder, cationic starch as organic binder and polyacrylamide as dispersant in distilled water. The SiC particulate preforms were consolidated by vacuum-assisted extraction, and were followed by drying and calcination. The drying processes were consisted with natural drying at $25^{\circ}C$ for 36 hrs and forced drying at 10$0^{\circ}C$ for 12 hrs in order to prevent the micro-cracking of SiC particulates preform. The compressive strengths of SiC particulate preforms were dependent on the inorganic binder content, calcination temperature and calcination time. The compressive strength of SiC preform increased from 0.47 MPa to 1.79 MPa with increasing the inorganic binder content from 1% to 4% due to the increase of $SiO_2$ flocculant between the interfaces of SiC particulates. The compressive strength of SiC preform increased from 0.90 MPa to 3.21 MPa with increasing the calcination temperatures from 800 to 120$0^{\circ}C$ under identical calcination time of 4hrs. The compressive strength of SiC preform increased from 0.92 to 1.95 MPa with increasing the calcination time from 2 hrs to f hrs at calcination temperature of 110$0^{\circ}C$. The increase of compressive strength of SiC preform with increasing the calcination temperature and time is due to the formation of crystobalite $SiO_2$ phase at the interfaces of SiC particulates.

• 한국대기환경학회지
• /
• 제12권5호
• /
• pp.567-576
• /
• 1996

Air pollution has been recognized for many years as a factor which heightens the risk of cancer. Extractable polycyclic organic matters in air particulates have been recognized as to have carcinogenic effects. This study examined the health risks posed by organic substances of air particulates in Seoul based on methodelogies that have been developed for conducting risk posed by organic substances of sir particulates in Seoul based on methodologies that have been developed for conducting risk assessment of complex -chemical-mixture. The data used in this study was obtained from air samples collected in a heavy traffic area of Seoul (Shinchon) from 1986 to 1994. The mean concentration of total supended pariculates was 158.0.mu.g/m/msup 3/, 5% of which is consisted of organic matter. The excess cancer risk from benzo(a)pyrene (BaP) was estimated to be 3.48.times.10$^{-6}$ by applying BaP unit risk estimates to the mean concentration. 8.74ng/m BaP equivalents of potency method was 1.0.times.10$^{-3}$ . The calculated risk from EOM were comparably higher than that from benzo(a)pyrene and exceeded the acceptable risk level.