• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.372-373
• /
• 2006

Modern business trends call for miniaturization of electronic systems. One of the major impedances in this miniaturization is the conductive and inductive components in chips and circuit boards. Direct Write Technology can write these soft magnetic materials, thus allowing for further miniaturization of inductor devices. Another obstacle in electronics fabrication is the size limitations of thick screen-printing and the material limitations in ink jet printing. Direct Write Technologies address both of these limitations by providing feature sizes less than 20 microns with a wide range of materials possibilities. A discussion of the application of these nano-particulate materials by Direct Write Technologies will be presented.

• Advances in aircraft and spacecraft science
• /
• 제9권3호
• /
• pp.217-242
• /
• 2022

This paper proposes a novel time-domain homogenization model combining the viscoelastic constitutive law with Eshelby's inclusion theory-based micromechanics model to predict the mechanical behavior of the particle reinforced composite material. The proposed model is intuitive and straightforward capable of predicting composites' viscoelastic behavior in the time domain. The isotropization technique for non-uniform stress-strain fields and incremental Mori-Tanaka schemes for high volume fraction are adopted in this study. Effects of the imperfectly bonded interphase layer on the viscoelastic behavior on the dynamic mechanical behavior are also investigated. The proposed model is verified by the direct numerical simulation and DMA (dynamic mechanical analysis) experimental results. The proposed model is useful for multiscale analysis of viscoelastic composite materials, and it can also be extended to predict the nonlinear viscoelastic response of composite materials.

• 한국화재소방학회논문지
• /
• 제26권4호
• /
• pp.70-76
• /
• 2012

본 논문에서는 디젤 승용차량에서 매연저감장치 손상에 기인한 차량화재에 대하여 기술하였다. 디젤 차량에서는 배출가스에 포함되는 입자상 물질을 저감하기 위하여 매연저감장치를 배기계통에 설치하고 있다. 매연저감장치는 입자상 물질의 과다 포집, 재상과정에서의 오류 및 흡기계통 불량 등에 의해 재생과정에서 파손에 이르게 되며, 매연저감장치가 파손되는 경우, 고온의 배출가스가 분출되고, 차량 하부 배기계통의 주변 가연물을 통해 화재로 진전된다. 매연저감장치 손상에 의해 화재가 발생되는 경우, 배기계통 배관 및 머플러 부분에 규산염계 무기화합물이 부착되는 특징을 나타내며, 이 규산염계 무기화합물은 매연저감장치 내부 필터 재료인 세라믹 부분이 손상되는 과정에서 발생된다. 따라서 화재가 발생된 디젤 차량의 경우, 머플러 주변에서 규산염계 무기화합물이 식별되는 경우, 매연저감장치 손상에 기인한 화재로 추정할 수 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제2권3호
• /
• pp.400-401
• /
• 1989

• 건설관리
• /
• 제12권2호
• /
• pp.55-58
• /
• 2011

• 상하수도학회지
• /
• 제33권1호
• /
• pp.9-16
• /
• 2019

The algal blooms in stagnant streams and lakes have caused many problems. Excessive algae leads to disturbance of ecosystem and overload of water treatment processes. Therefore, phosphorus(P), source of algal blooms, should be controlled. In this study, a filtration trench has been developed to convert dissolved phosphorus into hydroxyapatite(HAP) so that it could be crystallized on the surface of 'phosphorus removal granular material'; and residual particulate phosphorus could be removed by additional precipitation and filtration. The front and rear parts of filtration trench consisted of 'phosphorus removal granular material contact bed' and 'limestone filtration bed', respectively. As a result of the column test using phosphorus removal granular material and limestone serially, $PO_4-P$ was removed more than 90% when EBCT(empty bed contact time) of the contact bed was over 20 minutes; and T-P represented 60% of removal efficiency when total EBCT was over 1.5 hours. The results of column tests to figure out the sedimentation characteristics showed that more than 90% of particulate phosphorus could be removed within 24 hours. It was necessary to optimize the filtration part in order to increase removal efficiency of T-P additionally. Also, it was confirmed through the simulation of Visual MINTEQ that most of particulate phosphorus in the column tests is the form of HAP. Based on the results of the study, it could be suggested that the design parameters are over 0.5 hour of EBCT for phosphorus removal granular material contact bed and over 1.5 hours of EBCT for limestone filtration bed.

• 대한화학회지
• /
• 제44권6호
• /
• pp.600-610
• /
• 2000

본 연구에서는 전통적인 입자모델 교수 전략의 문제점을 분석하여, 잘 변화하지 않는 학습자의 신념체계인 연속적인 물질관을 입자적인 물질관으로 변화시킬 수 있는 새로운 입자모델 교수 전략으로 반성적 사고를 촉진시키는 입자모델 교수 전략을 고안하였다. 고안된 반성적 사고를 촉진시키는 입자모델 교수 전략을 초등학교 예비교사를 대상으로 처치한 후, 반성적 사고를 촉진시키는 입자모델 교수 전략의 효과를 전통적인 입자모델 교수전략과 비교 분석하였다. 전통적인 입자모델 교수전략의 문제점으로는 1) 입자모델을 실제물과 연결시켜 생각하지 못하는 문제점, 2) 입자모델을 학습할 때 무조건 암기하는 학습전략을 사용하는 경향이 높은점, 3) 입자모델을 수없이 학습한 후에도 연속적 물질관을 입자적 물질관으로 변화시키지 못하는 학생의 비율이 매우 놓은점, 4) 물질을 학습할 때 과학적 상황으로 학습하므로 물질에 대한 사고가 과학적 상황에 제한되어 있어 일상적 상황으로 연관시키지 못하는 문제점 등이 있다. 전통적인 과학적 상황의 입자모델 교수전략과 반성적 사고를 촉진시키는 일상적 상황의 입자모델 교수전략의 효과를 비교한 결과 일상적 상황의 입자모델 교수전략이 개념이해측면, 흥미측면, 입자적 물질관 형성정도, 기억측면에서 더 효과적인 것으로 나타났다. 본 연구결과로부터 얻을 수 있는 과학교육에의 중요한 시사점은 일상적 상황의 입자모델 교수전략 방법이 과학을 과학적 상황(실험실 상황)에서만 국한되어 사고하는 것이 아니라, 학교 과학 수업시간에 학습한 과학을 일상 상황과 연관시켜 사고할 수 있도록 해 준다는 것이다.

• 한국환경보건학회지
• /
• 제43권3호
• /
• pp.185-193
• /
• 2017

Objectives: An on-site study was conducted in order to quantify indoor exposure levels and the emission rate of particulate matter for domestic poultry buildings. Materials and methods: Three types of poultry building (caged layer house, broiler house, and layer house with manure belt) as classified by mode of manure treatment and ventilation were investigated in this study. Nine sites per each poultry building were selected and visited for measuring exposure levels and emission rate of particulate matter. Total dust and respirable dust among the particulate matter were analyzed based on the weight method. Emission rates were estimated by dividing emission amount, which was calculated through multiplying indoor concentration ($mg/m^3$), by the ventilation rate ($m^3/h$), into indoor area ($m^2$) and number of poultry reared in the poultry building. Results: Mean exposure levels for total dust and respirable dust in the poultry buildings were $3.91({\pm}1.99)mg/m^3$ and $1.99({\pm}0.89)mg/m^3$, respectively. The emission rates of particulate matter in the poultry buildings were estimated as $4.75({\pm}1.22)mg\;head^{-1}h^{-1}$ and $64.39({\pm}24.95)g\;m^{-2}h^{-1}$ for total dust and $0.58({\pm}0.23)mg\;head^{-1}h^{-1}$ and $7.52({\pm}2.51)mg\;m^{-2}h^{-1}$ for respirable dust, respectively. The distribution patterns for total dust and respirable dust were similar regardless of poultry building type. Among poultry buildings, broiler house showed the highest exposure level and emission rate of total dust and respirable dust, followed by layer house with manure belt and caged layer house. Conclusions: The finding that the broiler house showed the highest exposure level and emission rate of particulate matter can be attributed to sawdust utilized as bedding material, which can be dispersed into the air by movements of the chickens. Thus, a work environmental management solution for optimally reducing dust concentrations is necessary for broiler houses.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.3-10
• /
• 1998

Optimization problems may be devided into geometry optimization problems and topology optimization problems. In this paper, a method using tile equivalent material properties prediction techniques of a particulate-reinforced composites is proposed for the topology optimization. This method makes use of penalty factor in order that regions with intermediate value of design variables can be penalized. The computational results being obtained from PLBA algorithm of some values of penalty factor are presented.

• 전산구조공학
• /
• 제11권4호
• /
• pp.267-274
• /
• 1998

본 연구에서는 기지개와 미시구멍으로 구성된 복합재료에 입자보강 복합재료의 등가 재료상수 예측기법인 평균장 근사이론과 등가원리를 적용하여 위상 최적화에 필요한 등가 재료상수와 설계변수와의 상관관계식을 유도하였다. 또한, 유도된 관계식에 중간값을 갖는 설계변수의 수를 줄이기 위하여 벌칙인자를 도입하였다. 그리고 본 연구의 타당성을 검증하기 위하여 벌칙인자가 도입된 위상 최적화문제를 순차이차계획법인 PLBA 알고리즘을 이용하여 해석하였다.