• 한국안전학회지
• /
• 제8권1호
• /
• pp.35-46
• /
• 1993

This paper was concerned with the risk assessment about oxidizing substances as dangerous goods by burning test method. The sample. which was formed with the heaped cone-shape. was composed of solid oxidant and sawdust. The burning time of each sample was measured under the following various conditions circumstance temperature. mixing ratio of oxidizing substance and sawdust. particle size of sawdust and kinds of sawdust. As a results. the effective combustibility was gained when the sawdust content was 20∼30 wt.% in the sample and the lauan with -30+50 mesh was used. But. although the circumstance temperature increased. burning efficiency of the samples wet$.$e not affect by it. Finally. the average burning times were obtained by considering the weighting factors related on the mixing ratio and the circumstance temperature. And then. it were compared with the combustion risk level and the effects of cation and anion of oxidizing substances as dangerous goods.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.41-42
• /
• 2006

Small powder size is very useful in achieving detailed structures. STS 316 nanopowders with an average diameter of 100 nm and $5{\mu}m$ were utilized to produce feedstock. The mixing behavior of the feedstock indicated that the nanoparticle feedstock produced the highest mixing torque at various powder loading compared to the micropowder feedstock. The nanoparticles feedstocks showed that elastic properties are dominant in flow behavior and high viscosity. Conversely the micropowders feedstocks, viscous properties are dominant in flow behavior and less viscosity, nanopowders feedstock perform lower flow activation energy than feedstock with bigger particles.

• 천문학회보
• /
• 제44권1호
• /
• pp.55.1-55.1
• /
• 2019

Recently, temporal variations of the 3-micron emissions of methane and ethane have been detected in the auroral regions of Jupiter observed from Gemini North (Kim et al. 2019, in preparation). These temporal variations of 3-micron hydrocarbon emissions in the auroral regions can be caused by the following phenomena: temporal variations of temperatures, mixing ratios, auroral particle bombardments and Joule heatings, and the combinations of these. Although we are not able to quantitatively determine the cause of the temporal variations at this moment, we will present the following quantitative discussions: thermal influences on the 3-micron emissions, global mixing ratio distributions of the hydrocarbon molecules, and energy distributions of auroral particles penetrating the hydrocarbon layers. We will also present a possible correlation between the temporal variations of the 3-micron emissions and solar wind activities.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1336-1345
• /
• 2002

A triboelectrostatic separation system using a fluidized bed tribocharger for the removal of PVC material in the mixture of PVC/PS plastics is designed and evaluated as a function of electric field strength, air flow rate, and the mixing ratio of two-component mixed plastics. It consists of a fluidized-bed tribocharger, a separation chamber, a collection chamber and a controller. PVC and PS particles can be imparted negative and positive surface charges, respectively, due to the difference in the work function values of plastics suspended in the fluidized-bed tribocharger, and can be separated by passing them through an external electric field. Experimental results show that separation efficiency is strongly dependent on the electric Deld strength and particle mixing ratio. In the optimum conditions of 150 Ipm air flow rate and 2.6 kV/cm electric field strength a highly concentrated PVC (99.1%) can be recovered with a yield of more than 99.2% from the mixture of PVC and PS materials for a single stage of processing.

• Elastomers and Composites
• /
• 제34권5호
• /
• pp.414-422
• /
• 1999

방수재로 사용하는 EVA 에멀젼 수지에 라텍스 형태의 에폭시 수지, 우레탄 수지 SBR 수지를 전체 혼합물 중에 $0{\sim}50%$ 혼합하여 점성 및 경도 특성을 실험하였다. 시멘트 혼합물의 작업 가능한 한계점도는 20,000 cps이며 가사시간은 30분 이상으로 나타났다. 유색안료를 많이 혼합할수록 높은 점도를 나타내었고 시간경과에 따른 점도 상승폭도 컸다. SBR을 혼합하였을 때에는 경도가 크게 증가하였으나 에폭시 라텍스나 우레탄 라텍스를 혼합하였을 때에는 경도가 크게 증가하지 않았다. 시멘트 함량 30% 이상에서 경도가 크게 증가하였고 $50{\sim}60%$에서는 H이상의 높은 경도를 나타내었다. 고 충전시에는 라텍스의 융착보다는 시멘트 입자의 응집 및 응결에 의하여 경도가 높아졌다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.27-30
• /
• 2001

Flow and transport at fracture intersections, and their effects on network scale transport, are investigated in three-dimensional random fracture networks. Fracture intersection mixing rules complete mixing and streamline routing are defined in terms of fluxes normal to the intersection line between two fractures. By analyzing flow statistics and particle transfer probabilities distributed along fracture intersections, it is shown that for various network structures with power law size distributions of fractures, the choice of intersection mixing rule makes comparatively little difference in the overall simulated solute migration patterns. The occurrence and effects of local flows around an intersection (local flow cells) are emphasized. Transport simulations at fracture intersections indicate that local flow circulations can arise from variability within the hydraulic head distribution along intersections, and from the internal no flow condition along fracture boundaries. These local flow cells act as an effective mechanism to enhance the nondiffusive breakthrough tailing often observed in discrete fracture networks. It is shown that such non-Fickian (anomalous) solute transport can be accounted for by considering only advective transport, in the framework of a continuous time random walk model. To clarify the effect of forest environmental changes (forest type difference and clearcut) on water storage capacity in soil and stream flow, watershed had been investigated.

• 한국추진공학회지
• /
• 제22권3호
• /
• pp.8-13
• /
• 2018

ZPP(Zirconium Potassium Perchlorate)는 산화제 potassium perchlorate, 금속원료 zirconium, 결합제 Viton 조성의 점화제이다. ZPP는 항공우주산업, 추진제 점화원, 자동화 산업에 사용되고 있다. 본 연구에서는 PMD(Pyrotechnic Mechanical Device)에 사용되는 ZPP의 제조공정 및 형상/열량/압력값과 같은 특성을 연구하였다. ZPP 제작 시, 원료들을 고속으로 교반하여 ZPP가 균일한 입자크기 및 형상으로 제작될 수 있도록 혼화공정을 설계하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.445-450
• /
• 2017

ZPP(Zirconium Potassium Perchlorate)는 산화제 potassium perchlorate, 금속원료 zirconium, 결합제 Viton 조성의 점화제이다. ZPP는 항공우주산업, 추진제 점화원, 자동화 산업에 사용되고 있다. 본 연구에서는 PMD(Pyrotechnic Mechanical Device)에 사용되는 ZPP의 제조공정 및 형상/열량/압력값과 같은 특성을 연구하였다. ZPP 제작 시, 원료들을 고속으로 교반하여 ZPP가 균일한 입자크기 및 형상으로 제작될 수 있도록 혼화공정을 설계하였다.

• 한국안전학회지
• /
• 제20권4호
• /
• pp.46-53
• /
• 2005

Existing study far fire-resistant concrete has been done already. but it is not found out how the waste tyre mixing concrete will be acted against fire. This waste tyre concrete molds under the condition of $0^{\circ}C,\;200^{\circ}C,\;400^{\circ}C,\;600^{\circ}C$ were heated in gas oven. It was worried about that they might be fractured down at about $800^{\circ}C$ so that they can not be tested. compressive strength for the test molds are made with commercially used $180kg/cm^2,\;210kg/cm^2,\;240kg/cm^2,\;270kg/cm^2$ mixing saw dust with proportion such as 0.05%, 0.1%, 0.2%, 0.4%, 0.6%, 0.8%, 1.0%, 1.2%, 1.4%, 1.6%, 1.8%, 2.0% compressive strength at $200^{\circ}C$ was approximately 20% from the original, while approximately 30% deoreased at $400^{\circ}C$. their results are not quite different from the normal concrete condition even though they contains saw dust in it. The higher strength the concrete has, the less strength was decreased. There are almost no difference in strength under the condition of less than $400^{\circ}C$, but damage of concrete structure could be considerable large with more than $400^{\circ}C$.

• 한국세라믹학회지
• /
• 제39권11호
• /
• pp.1023-1027
• /
• 2002

본 연구에서는 초임계 mixing을 이용하여 $SrTiO_3:\;Pr^{3+}$ 형광체 분말을 제조하였으며, 일반적 제조 방법인 고상법으로 제조된 분말과 발광특성을 비교하였다. 초임계 mixing에 의해 제조된 $SrTiO_3:\;Pr^{3+}$ 형광체 분말은 단상의 perovskite 구조를 갖으며, 형상은 구형인 좁은 입도분포를 보인다. 발광특성의 증대를 sensitizer인 $Al^{3+}$과 $Ga^{3+}$을 첨가하여 형광체의 발광특성을 관찰하였다.