• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3207-3216
• /
• 2021

Three-dimensional structures of a vortical flow field and heat transfer characteristics in a partially blocked 7-pin fuel assembly mock-up of sodium-cooled fast reactor have been investigated through a numerical analysis using a commercial computational fluid dynamics code, ANSYS CFX. The simulation with the SST turbulence model agrees well with the experimental data of outlet and cladding wall temperatures. From the analysis on the limiting streamline at the wall, multi-scale vortexes developed in axial direction were found around the blockage. The vortex core has a high cladding wall temperature, and the attachment line has a low cladding wall temperature. The small-scale vortex structures significantly enhance the convective heat transfer because it increases the turbulent mixing and the turbulence kinetic energy. The large-scale vortex structures supply thermal energy near the heated cladding wall surface. It is expected that control of the vortex structures in the fuel assembly plays a significant role in the convective heat transfer enhancement. Furthermore, the blockage plate and grid spacer increase the pressure drop to about 36% compared to the bare case.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.05a
• /
• pp.53-54
• /
• 2018

U/RE was electrochemically recovered to LCC at $50mA/cm^2$ from LiCl-KCl salt containing $0.5wt%UCl_3$, $0.22wt%NdCl_3$, 0.15wt%$CeCl_3$ and $0.07wt%LaCl_3$. The Cd in the LCC deposit was removed during the distillation using Cd distiller. U/RE product of 107g obtained from the distiller was installed to TG and then heated to $1200^{\circ}C$ to be consolidated. Dense U/RE metal ingot was not acquired through the consolidation process because U/RE product had been partially already oxidized during the distillation process.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1963-1970
• /
• 1992

An oscillatory motion of the natural convection in a two dimensional, partially divided square enclosure heated from below, and fitted with a partition is investigated numerically. The enclosure was composed of the lower hot and the upper cold horizontal walls and the adiabatic vertical walls, and a partition was situated perpendicularly at the mid-height of the one vertical insulated wall. The governing equations are solved by using the finite element method with Galerkin method. The computations were performed with the variation of the length and the thermal conductivity of the partition, and Rayleigh number based on the temperature difference between horizontal walls and the enclosure height with water(Pr=4.95). also, the effect of the inclination angles was studied for the transition to the oscillating flow. As the results, it was found that the intensity and frequency of oscillatory motion were affected significantly by the Rayleigh number and the length of partition. The effect of oscillatory motion was weaken with the increase of the thermal conductivity of partition. The inclination angle for the transition was raised with the increase of Rayleigh number and the length of partition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.7
• /
• pp.935-951
• /
• 2013

The recent entry and heated competition of numerous fashion brands in the luxury fashion market have all compelled luxury businesses to change. The issue of brand equity has emerged as one of the most critical areas for luxury marketing management. Despite strong interest in the subject, there is little evidence of how brand equity is created by marketing activities and what their effects are. This study identifies the effects of luxury marketing activities on the brand equity of luxury items, utilizing Keller's (2001) 'CBBE (Customer Based Brand Equity) Model' as a theoretical framework. Based on literature review, a conceptual model for brand signature, heritage, premium price, controlled distribution, and promotion on customers' view on brand equity was tested. To test the hypothesized building paths of luxury brand equity, statistical analysis were performed with an AMOS 7.0 program using a confirmatory factor analysis and structural equation model. The results were: First, luxury brand equity was defined in terms of four components (brand awareness/association, customer judgment, customer feeling, and customer-brand resonance). Second, the proposed conceptual framework of this study was partially significant. We can provide an effectiveness of Keller's CBBE model to conceptualize the building process of luxury brand equity; subsequently, marketers should develop core elements to position a brand strategy to create a competitive advantage.

• Journal of the Korean Ceramic Society
• /
• v.30 no.9
• /
• pp.695-700
• /
• 1993

In this study, we prepared Pb-Ti stock solution by sol-gel processing and deposited PbTiO3 thin film on a Pt coated SiO2/Si wafer by spin coating using the stock solution. We used lead acetate trihydrate and titanium isopropoxide. The stock solution was partially hydrolized and finally a 0.25M coating solution was prepared. We achieved spin coating at 4000rpm for 30 seconds and heated the thin film at 375$^{\circ}C$ for 5 minutes and at $600^{\circ}C$ for 5 minutes successively, first and second heating state. And the thin film was finally sintered at 90$0^{\circ}C$ for 1 hour in the air. The upper electrode of the thin film was made by gold sputtering and was cricle shape with radius 0.4mm. Measured dielectric constant, dissipation factor and phase transition temperature(Cuire Temp.) were about 275, 0.02 and 521$^{\circ}C$ respectively. To observe ferroelectric characteristics we calculated Pr(remnant polarization) and Ec(coercive field) byhysteresis curve. Ec was 72kV/cm and Pr was 11.46$\mu$C/$\textrm{cm}^2$.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4120-4124
• /
• 2023

High-level radioactive waste produced by nuclear power plants are disposed subterraneously utilizing an engineered barrier system (EBS). A gap inevitably exists between the disposal canisters and buffer materials, which may have a negative effect on the thermal transfer and water-blocking efficiency of the system. As few previous experimental works have quantified this effect, this study aimed to create an experimental model for investigating differences in the temperature changes of bentonite buffer in the presence and absence of air gaps between it and a surrounding stainless steel cell. Three test scenarios comprised an empty cell and cells partially or completely filled with bentonite. The temperature was measured inside the buffers and on the inner surface of their surrounding cells, which were artificially heated. The time required for the entire system to reach 100℃ was approximately 40% faster with no gap between the inner cell surface and the bentonite. This suggests that rock-buffer spaces should be filled in practice to ensure the rapid dissipation of heat from the buffer materials to their surroundings. However, it can be advantageous to retain buffer-canister gaps to lower the peak buffer temperature.

• Korean Journal of Veterinary Research
• /
• v.11 no.1
• /
• pp.1-39
• /
• 1971

The purpose of present study was to investigate the possibility to immunize guineapigs and swine against Metastrongylus apri infection by the administration of irradiated infective larvae. Four main experiments were undertaken. Firstly, three groups of infective larvae irradiated at $3{\times}10^4r$, $4{\times}10^4r$, and $5{\times}10^4r$ respectively were inoculated to guineapigs and their immunogenic effects were examined from the clinical, anatomical, and serological viewpoints to decide the optimal dose of X-ray for the atenuation of them. Secondly, the migratory behavior of the larvae irradiated at the optimal dose was compared with that of normal infective larvae. Thirdly, pigs were inoculated with each 5,000 infective larvae irradiated at the optimal dose and the clinical, anatomical and serological responses of them before and after challenge were examined. Fourthly, the heated extract of adult M. apri which had been used as an antigen in the serological examinations was analyzed and compared with that of adult Ascaris suis and of adult Trichuris suis by immunoelectrophoretic method. The results obtained are summerized as follows: 1) The optimal dose of X-ray for the atenuation of the infective larvae which can minimize the pathogenecity but keep the antigenecity of the infective larvae was $5{\times}10^4r$. 2) Guineapigs could become completely resistant to subsequent challenge infection by the administration of 1,000 infective larvae irradiated at $5{\times}10^4r$, without showing any symptom of disease before and after the challenge. 3) There were some indication that guineapigs could acquire complete immunity after they overcome the infection with normal infective larvae. 4) It was shown that, in guineapigs, the $5{\times}10^4r$-irradiated larvae can migrate to the large intestine and mesenteric lymph node within a day, where they stay for as long as 16 days to stimulate the host's immunity. 5) It also was shown that, in guineapigs, the normal infective larvae challenged to resistant guineapigs can migrate to the large intestine and mesenteric lymph node, where they are affected by the immune mechanism of host within 10 days without further migration. 6) Pigs could become partially resistant to subsequant challenge by the administration of 5,000 infective larve irradiated at $5{\times}10^4r$; no clinical symptom occurred after the administration, but milder symptoms of parasitic bronchitis were observable after the challenge infection and fewer number of worms were detected from the lungs at autopsy compared with severe symptoms and much number of worms in control pigs. 7) It was shown that, in pigs, a few of the $5{\times}10^4r$-irradiated larvae can migrate to the lungs, where they stay for as long as 104 days in stunted and sterile states; their body-lengths were short and their uteri developted no eggs. 8) There was evidence that the male larvae were more susceptible to X-ray than the female larvae. 9) Antibodies relating to the administration with $5{\times}10^4r$-irradiated or normal larvae were detected from the sera of both guineapigs and pigs by means of indirect haemagglutination and agar diffusion precipitin tests. Relatively higher antibody titers were recorded by the former test, but precipitin bands were demonstrable only when the positive sera were concentrated in one tenth of original volume in the later one. 10) The antibody titers of pig sera began to rose on 14 days, kept their peak during the period from 14 th day to 21st day, and fell to a low level on 28 days after the administration of $5{\times}10^4r$ or normal infective larvae. 11) A slight increase in gamma globublin of the pig sera occurred following the administration. The gamma globulin level showed a tendency to fluctuate in acordance with the antibody level. 12) A marked eosionophilia occurred in pigs on 7 or 14 days following the administration. The eosinophil count showed the same tendency to fluctuate as the gamma globulin did. 13) It was shown that the serum antibodies detected by the heated extract of adult Metastrongylus apri react crossly with the heated extract of adult Ascaris suis but not with that of adult Trichuris suis in indirect haemagglutination and agar diffusion preciption reactions. 14) The heated extract of adult Metastrongylus apri could he divided into 9 antigenic components by immunoelectrophoresis, one (arc 4) of which was shown to be common to both extracts of adult Ascaris suis and adult Trichuris suis, and the other one (arc 9) to only the extract of adult Ascaris suis.

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.541-551
• /
• 1988

The purpose of this investigation was to prepare multicomponent monolithic Li-Al-Si gels of composition(mol%) 16.67 Li2O-16.67 Al2O3-66.67 SiO2 and to convert the gels to monolithic glass-ceramic at low temperature without melting. The hydrolysis, DTA, TGA, TMA, SEM, pore distribution, density and the activation energy for crystallization of the glass-ceramic formation with rawmaterials of which tetraethl orhosilicate of networkforming cation(Si) is partially hydrolyzed, aluminum isoproxide and lithium methoxide prepared by Li-metal react with methanol were studied. The results were as follows : 1) Monolithic gels which were added with additional water, resulting in a total water content 2.5 to 3.0 times the stoichiometric amount required to fully hydrolyze the alkoxides. 2) Specimens were dried to form crylinders 60mm in length and 40mm in diameter in about 800 hrs at 5$0^{\circ}C$. 3) $\beta$-eucryptite crystals and $\beta$-spodumene crystals were detected in samples heated above 75$0^{\circ}C$. 4) Within the temperature and range of 25-50$0^{\circ}C$ and 1,00$0^{\circ}C$ the thermal expansion coefficient for crystallized samples were shown as 2.6-5.7$\times$10-7/$^{\circ}C$ and 7.4-12.5$\times$10-7/$^{\circ}C$, respectively. 5) The activation energy for the crystal growth was 11.01kcal/mol at 794$^{\circ}C$ to 85$0^{\circ}C$.

• The Korean Journal of Mycology
• /
• v.14 no.1
• /
• pp.79-84
• /
• 1986

A cellulose-degrading enzyme from Ganoderma lucidum was partially purified by ammonium sulfate precipitation and its enzymatic properties were studied. The enzyme had an optimum pH for activity at 4.0, and its stability range was pH $4.0{\sim}7.0$. The optimum temperature was $55^{circ}C$ and the enzyme retained 80% original activity after heated at $50^{\circ}C$ for 60 min. The activation energy of the enzyme for CMC degradation was caculated and found to be 6.2 Kcal/mole. The enzyme was activited by the addition of $Co^{++},\;Mn^{++}$, but slightly inactivated by $Hg^{++}$. Various enzyme inhibitors and chemical reagents did not affect the enzyme activity. The enzyme acted on native celluose as well as CMC. The Michaelis constant for CMC was calculated to be 2.4 mg glucose ep/ml.

• Korean Journal of Metals and Materials
• /
• v.48 no.11
• /
• pp.1035-1040
• /
• 2010

The research efforts on GaN-based light-emitting diodes (LEDs) keep increasing due to their significant impact on the illumination industry. Surface mount technology (SMT) is widely used to mount the LED packages for practical application. In surface mount soldering both the device body and leads are intentionally heated by a reflow process. We studied on the effects of multiple reflows on microstructural variation and joint strength of the solder joints between the LED package and the substrate. In this study, Pb-free Sn-3.0Ag-0.5Cu solder and a finished pad with organic solderability preservatives (OSP) were employed. A $Cu_6Sn_5$ intermetallic compound (IMC) layer was formed during the multiple reflows, and the thickness of the IMC layerincreased with an increasing number of reflows. The shear force decreased after three reflows. From the observation of the fracture surface after a shear test, partially brittle fractures were observed after five reflows.