• Advances in concrete construction
• /
• v.7 no.4
• /
• pp.231-239
• /
• 2019

The present study deals with the development of metakaolin-based geopolymer concrete (GPC) and thereafter studying the effects of adding ultra-fine slag on its mechanical and permeability characteristics. The mechanical characteristics including compressive, split tensile, flexural strengths and elastic modulus were studied. In addition, permeability characteristics including water absorption, porosity, sorptivity and chloride permeability were studied up to 90 days. The results showed the effective utilization of metakaolin for the development of elevated temperature cured geopolymer concrete having high 3-day compressive strength of 42.6 MPa. The addition of ultra-fine slag up to 15%, as partial replacement of metakaolin resulted in an increase in strength characteristics. Similar improvement in durability properties was also observed with the inclusion of ultra-fine slag up to 15%. Beyond this optimum content of 15%, further increase in ultra-fine slag content affected the mechanical as well as permeability parameters in a negative way. In addition, the relationship between various properties of GPC was also derived.

• Advances in concrete construction
• /
• v.10 no.6
• /
• pp.463-478
• /
• 2020

Multiple mathematical modeling for prediction of slump, compressive strength and depth of water penetration at 28 days were performed using statistical analysis for the concrete containing waste limestone powder as partial replacement of sand obtained from experimental program reported in this research. To extract experimental data, 180 concrete cubic samples with 20 different mix designs were investigated. The twenty non-linear regression models were used to predict each of the concrete properties including slump, compressive strength and water depth penetration of concrete with waste limestone powder. Evaluation of the models using numerical methods showed that the majority of models give acceptable prediction with a high accuracy and trivial error rates. The 15-term regression models for predicting the slump, compressive strength and water depth were found to have the best agreement with the tested concrete specimens.

• Structural Engineering and Mechanics
• /
• v.82 no.2
• /
• pp.133-149
• /
• 2022

This study investigates the resistance of sustainable ultra-high performance concrete (UHPC) on steel reinforcement corrosion. For enhancing the sustainability of UHPC, concrete mixes were prepared with ordinary Portland cement main binder, and mixes with moderate to high percentages of blast furnace cement (CEM III), fly ash (FA), and slag cement as partial replacements of the full quantity of the used cement. Linear polarization resistance technique was employed to estimate the electrochemical behavior of the concrete specimens. Results showed that the compressive strength and the resistance of steel to corrosion in marine environments can be enhanced by improving the sustainability of UHPC through incorporation of CEM III, FA, and slag cement. FA replacement of up to 50% with the addition of 15% SF content produced better compressive strength and steel corrosion resistance than slag cement whether with the use of ordinary Portland cement or blast furnace cement as the main binder.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.6
• /
• pp.821-830
• /
• 2001

To study the effects of partial replacement of soybean meal (SBM) with palm kernel meal (PKM) and copra meal (CM) on growth performance, nutrient digestibility and carcass characteristics in finishing pigs, a total of 150 crossbred pigs (Landrace$\times$Duroc$\times$Yorkshire; average $52.11{\pm}1.08kg$ body weight) were alloted to five treatments, in a randomized block design. The treatments included 1) Control: without PKM or CM, 2) PKM2: 2% of palm kernel meal, 3) PKM4: 4% palm kernel meal, 4) CM2: 2% of copra meal, 5) CM4: 4% of copra meal. During the early finishing period (52~74 kg), growth performance was better in CM diets than in PKM diets or control diet, and in overall period (74~100 was lower (p<0.05) in PKM4 diet than the other diets. Nutrient digestibilies of PKM or CM substituted diets showed the tendency to be lower than those of control diet. In the early finishing period, total amino acid digestibilities of PKM and CM diets had the tendency to be lower than control diet, and in the late finishing period, they were lower (p<0.05) than control diet. Carcass length was longer (p<0.05) in the pigs fed 2% CM than in the pigs fed 4% PKM diet, but other carcass characteristics were not different among treatments. Although the dietary C14:0 content affected (p<0.05) on the C14:0 content in the carcass, the inclusion of PKM or CM in the diet did not affect the total saturated fatty acids and unsaturated fatty acids in the backfat of finishing pigs. Although it was not significant, supplementation of CM at the 2% and 4% of control group tended to decrease feed cost per kg weight gain by 2.89 to 1.42%, respectively. In conclusion, copra meal can be a valuable source of protein in the diet for finishing pigs and may replace other protein sources in pig diets to a considerable extent.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.9
• /
• pp.1339-1347
• /
• 2003

An experiment was conducted to investigate the effects of microbial phytase ($Natuphos^{(R)}$) supplementation in combination with carbohydrases (composed of enzymes targeted to soybean meal (SBM) dietary components such as $\alpha$-galactosides and galactomannans; $Endo-Power^{(R)}$) to corn-soybean meal based diet (CSD) and complex diet (CD) with a partial replacement of SBM with rape seed meal (RSM) and cotton seed meal (CSM) on growth performance and nutrient digestibility of growing pigs. A total of 168 growing pigs averaging $13.18{\pm}1.77kg$ of initial body weight was arranged as a $2{\times}2$ factorial design with main effects of diet types (corn-SBM based diet (CSD) and complex diets (CD; 5% of SBM was replaced with 2.5% of RSM and 2.5% of CSM in diet for phase I (0 to 3 weeks) and 6% of SBM was replaced with 3% of RSM and 3% of CSM in diet for phase II (4 to 7 weeks))) and enzyme supplementation (none and 0.1% of phytase (500 FTU/kg diet) and 0.1% of carbohydrases). The diet with enzyme application were formulated to have a 0.18% unit lower aP than diets without enzyme application. Each treatment had three replicates with 14 pigs per replicate. To determine supplementation effect of phytase and carbohydrases on ileal amino acid digestibility of SBM, RSM and CSM, a total of 18 T-cannulated pigs (initial body weight; $13.52{\pm}1.24kg$) were assigned to six dietary treatments in the present study. Dietary treatments in metabolic trial included 1) SBM diet, 2) SBM diet+with enzymes (phytase (500 FTU/kg) and carbohydrases at 0.1%, respectively), 3) CSM diet, 4) CSM diet+enzymes, 5) RSM diet and 6) RSM diet+enzymes. During whole experimental period (0 to 7 wks), there was no difference in growth performance between diets (CSD and CD). However, dietary phytase and carbohydrases supplementation significantly improved gain/feed ratio (G:F) of growing pigs. During the phase II (4-7 weeks), dietary phytase and carbohydrases supplementation significantly improved all fecal nutrient digestibilities (Dry matter (DM), gross energy (GE), crude protein (CP), crude fat (CF), calcium (Ca) and phosphorus (P)). Dietary phytase and carbohydrases supplementation improved significantly overall ileal amino acid digestibilities of SBM, RSM and CSM based diets (p<0.05). The simultaneous inclusion of phytase and carbohydrases in both of CSD and CD reduced feed cost per kg body weight gain (FCG). Also, results suggest that 2.5 to 3% of RSM and CSM, respectively, might be used as a protein source in growing pig diets without having an adverse effect on the growth performance and nutrient digestibility and simultaneous phytase and carbohydrases addition improves nutritional value of SBM, RSM and CSM by improving ileal amino acid digestibilities.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.63-72
• /
• 2012

The high-flowing concrete requires additionally or excessively more expensive admixture than conventional concrete. So, the concrete has not to be widely used in practical field due to the increase of production price, need of additional facilities, and excessive development of concrete strength in associate with addition of too much cementitious material even though it has more significant advantages than conventional concrete. Thus, this study aims at developing high-flowing concrete with general strength unlike high strength which has been carried out in conventional study. To observe the role of aggregate in the concrete quantitatively and to increase the performance of high-flowing concrete effectively, parametric studies were carried out such as W/C, s/a, fineness modulus of aggregate, contribution degree of particle sizes, and the effect of 13mm aggregate and fine stone powder as a partial replacement of aggregates. And the effect of these factors on performance of the concrete was evaluated by measuring slump-flow and gap of penetration height in U-typed instrument. As a result, it was found that flowability of high-flowing concrete depends upon grading of fine aggregate more significantly than that of coarse aggregate and is enhanced greatly as fineness modulus of fine aggregate decreases and the value of s/a increases. In addition, the application of 13mm aggregate and fine stone powder are expected as a partial replacement of aggregate in order to increase the performance of high-flowing concrete more effectively.

• Korean Journal of Food Science and Technology
• /
• v.46 no.5
• /
• pp.593-600
• /
• 2014

Normal rice starch (NRS) possesses high gelling and retrogradation tendencies, with poor freeze-thaw stability. This study investigated the effects of partial replacement of waxy rice starch (WRS) with gums on the pasting and viscoelastic properties as well as the freeze-thaw stability of the WRS paste. Xanthan gum (XAT), locust bean gum (LBG), and their mixtures were individually mixed with WRS at a ratio of 1:19 (w/w). WRS-gum mixtures were pasted using a rapid visco-analyzer at 5% total solid content, and analyzed with respect to the pasting and viscoelastic characteristics, and freeze-thaw stability. Pasting properties of WRS were retarded in pasting temperature and enhanced in pasting viscosity (although peak viscosity was varied) by partial replacement with gum and gum mixtures. Storage moduli of WRS-XAT:LBG pastes became similar to those of NRS paste with increasing angular frequency from 1 to 10 rad/s. Finally, WRS-XAT and WRS-XAT:LBG possessed more enhanced freeze-thaw stability than NRS.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.11
• /
• pp.1725-1733
• /
• 2019

Objective: Evaluate the partial replacement of soybean meal with different protein sources in piglet feed during the nursery phase in terms of digestibility of feed, nitrogen balance, growth performance and blood parameters. Methods: Experiment I involved 24 crossbred entire male pigs with an initial body weight (BW) of $18.28{\pm}0.7kg$ and used a randomized complete block design consisting of 3 treatments (fish meal, FM; soybean protein concentrate, SPC; and soybean meal, SBM) and 8 replicates, with 1 pig per experimental unit. Experiment II involved 1,843 crossbred male and female pigs with an initial BW of $6.79{\pm}0.90kg$ and was based on a completely randomized design with a $2{\times}3$ factorial arrangement (2 sexes and 3 protein sources) and 13 replicates. Results: The results of Exp. I indicate effects (p<0.05) of dietary protein sources on digestible protein (FM, 17.84%; SPC, 16.72%, and SBM, 18.13%) and on total nitrogen excretion (TNE, $g/kg\;BW^{0.75}/d$) in which pigs fed with SBM-based feed had TNE values that were 5.36% and 3.72% greater than SPC and FM, respectively. In the Exp. II, there was difference (p<0.01) between sexes in the pre-starter I and starter phases, and total period in average daily feed intake (ADFI), which were greater in females, and between the protein sources, ADFI, final weight and daily weight gain. For urea in the pre-starter II and starter phases and glucose in the pre-starter II phase, there was a difference (p<0.05) between protein sources and between sexes, in starter phase in urea concentrations (females: 57.11 mg/dL and males: 50.60 mg/dL). Conclusion: The use of SBM as only protein source influences larger TNE ($g/kg\;BW^{0.75}/d$), reduces the growth performance of piglets and increases plasma urea concentrations in prestarter II phase.

• Animal Bioscience
• /
• v.35 no.12
• /
• pp.1892-1903
• /
• 2022

Objective: A series of experiment were conducted to evaluate the effects of replacing a part of soybean meal (SBM) at 6% of broiler diets with fermented soybean meal (FSBM) obtained by single or two-stage fermentation by measuring growth performance, antioxidant activity in the jejunum and distal intestinal microflora. Methods: Soybean meal samples were prepared by single-stage fermentation using Bacillus velezensis (Bv) (FSBM_B), or Lactobacillus spp. (as commercial control) (FSBM_L). Additional SBM sample was prepared by two-stage fermentation using Bv and subsequently using Lactobacillus brevis ATCC 367 (Lb) (FSBM_B+L). Enzyme activity, chemical composition, trichloroethanoic acid-nitrogen solubility index (TCA-NSI) and antioxidant activity were measured. Then, in an in vivo study, 320 Ross308 broilers were divided into four groups with ad libitum supply of feed and water. Four groups were fed either a corn-soybean meal diet (SBM), or one of fermented SBM diets (FSBM_B+L, FSBM_B, and FSBM_L). Growth, serum characteristics, microflora, and the mRNA expression of selected genes were measured. Results: Compared to SBM, FSBM_B+L contained lower galacto-oligosaccharide, allergic protein, and trypsin inhibitor, and higher TCA-NSI by about three times (p<0.05). Reducing power and 1,1-diphenyl-2-picrylhydrazyl free radical scavenging ability correlated positively with the TCA-NSI content in FSBM. Growth performances were not significantly different among four groups. In jejunum of 35-day-old broilers, partial replacement of SBM by FSBM_B+L increased the activity of superoxide dismutase and catalase (CAT), and the FSBM_B group had the highest catalase activity (p<0.05). Partial replacement of SBM by FSBM increased relative mRNA expressions of nuclear factor erythroid 2-related factor 2 (Nrf2), heme oxygenase-1 (HO-1), and peptide transporter 1 (PepT1) (p<0.05); however, FSBM_B+L increased CAT mRNA level to 5 times of the control (p<0.05). Conclusion: Using Bv- and Lb-processed SBM through two-stage fermentation to partially replace 6% of diets will improve the gut's antioxidant activity under commercial breeding in broilers.

• Food Science of Animal Resources
• /
• v.38 no.1
• /
• pp.180-188
• /
• 2018

The market size of home meal replacement (HMR) products has been gradually growing worldwide, even in Korea. In Korean HMR products, meat is the most important food ingredient compared with rice and vegetables. Therefore, this study aimed to evaluate changes in physiochemical and sensory aspects of beef under different preparation processes. For preparing four treatments, beef eye of round (ER) added with salt and sugar (treatment 1) and that without salt and sugar (treatment 2) were mixed with rice and frozen at $-50^{\circ}C$. Beef ER without salt and sugar was also topped onto the rice and frozen (treatment 3), and that was topped onto the rice and precooled before freezing (treatment 4). Physiochemical analyses included cooking and drip losses, shear force, color, salt soluble protein, and sensory attributes were tested. The results showed significantly higher drip loss and total loss in beef ER samples 1 and 2, which were mixed with rice, compared to beef ER samples 3 and 4, which were not mixed with rice. A significantly higher discoloration was also observed in beef ER samples 1 and 2, compared to that in samples 3 and 4. In the partial least squares regression (PLSR) analysis, beef ER sample 4 (precooled before freezing) was highly related to sensory attributes, such as flavor, overall acceptability, and juiciness, and far from non-preferred shear force. As a result, beef ER in HMR sample 4 was the most preferable to the sensory panel, and it had the most desirable physicochemical analysis outcomes.