• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.1-7
• /
• 2023

Durability was evaluated by performing a full-scale vertical load fatigue test and a wheel load performance test on the HRS, which reduces the replacement time of the existing expansion joint and improves serviceability to allow partial replacement by lane. As a result of the vertical load fatigue test, the maximum stress of the rail-type expansion joint is 170 MPa, which is about 47.8% of the yield strength of the HRS expansion joint rail 355 MPa. The vertical load fatigue test of the HRS expansion joint with improved serviceability set the size and load of the load plate according to the road bridge design standards, did not show any fracture behavior in the vertical load fatigue test and the wheel load performance test 2 million times, and its durability and safety were verified.

• Computers and Concrete
• /
• v.33 no.1
• /
• pp.77-90
• /
• 2024

Waste foundry sand (WFS) is the waste product that cause environmental hazards. WFS can be used as a partial replacement of cement or fine aggregates in concrete. A database comprising 234 compressive strength tests of concrete fabricated with WFS is used. To construct the machine learning-based prediction models, the water-to-cement ratio, WFS replacement percentage, WFS-to-cement content ratio, and fineness modulus of WFS were considered as the model's inputs, and the compressive strength of concrete is set as the model's output. A base extreme gradient boosting (XGBoost) model together with two hybrid XGBoost models mixed with the tunicate swarm algorithm (TSA) and the salp swarm algorithm (SSA) were applied. The role of TSA and SSA is to identify the optimum values of XGBoost hyperparameters to obtain the higher performance. The results of these hybrid techniques were compared with the results of the base XGBoost model in order to investigate and justify the implementation of optimisation algorithms. The results showed that the hybrid XGBoost models are faster and more accurate compared to the base XGBoost technique. The XGBoost-SSA model shows superior performance compared to previously published works in the literature, offering a reduced system error rate. Although the WFS-to-cement ratio is significant, the WFS replacement percentage has a smaller influence on the compressive strength of concrete. To improve the compressive strength of concrete fabricated with WFS, the simultaneous consideration of the water-to-cement ratio and fineness modulus of WFS is recommended.

• Structural Monitoring and Maintenance
• /
• v.11 no.2
• /
• pp.71-86
• /
• 2024

In this study, to reduce the amount of cement consumed in the production of cementitious composites, the effects of partial replacement of cement weight with nano-silica, silica fume, and copper slag on the mechanical properties of polypropylene fiber-reinforced cementitious composites are investigated. For this purpose, the effect of replacing cement weight by each of the aforementioned materials individually and in combination is studied. A total of 34 mix designs were prepared, and their compressive, tensile, and flexural strengths were obtained for each mix. Among the mix designs with one cement replacement material, the highest strength is related to the sample containing 2.5% nano-silica. In this mix design, the compressive, tensile, and flexural strengths improve by about 33%, 13%, and 15%, respectively, compared to the control sample. In the ones with two cement replacement materials, the highest strengths are related to the mix made with 10% silica fume along with 2% nano-silica. In this mix design, compressive, tensile, and flexural strengths increase by about 42%, 18%, and 20% compared to the control sample, respectively. Furthermore, in the mixtures containing three cement substitutes, the final optimal mix design for all three strengths has 15% silica fume, 10% copper slag, and 2% nano-silica. This mix design improves the compressive, tensile, and flexural strengths by about 57%, 23%, and 26%, respectively, compared to the control sample. Finally, two relationships have been presented that can be used to predict the values of tensile and flexural strengths of cementitious composites with very good accuracy only by determining the compressive strength of the composites.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.2
• /
• pp.179-188
• /
• 2010

In order to aide in the design of an improved menu book, which could play an important role as a marketing tool, the current version of the menu books and managers (subjects) of 295 restaurants in the Incheon area were examined. These were managers of Korean (36.3%), Western (25.8%), Japanese (14.6%), cafeteria (12.5%) and Chinese (10.8%) style restaurants. The level of service (self-evaluation, 3-point scale) was average $2.25{\pm}0.45$. The general colorings of the menu books were green (19.0%), brown (18.6%), black (17.6%), yellow (15.9%), red (13.6%) and blue (13.2%). The material of the menu book cover was mainly leather (35.9%), and the internal material was mainly coated paper (59.7%). Physically, the design was two-panel fold (38.3%), two-panel multi-page (35.6%), die style (10.2%), single panel (8.1%) and tent style (7.8%). The type sizes were unchanged in 49.9% of the menu books and in 61.7% photos were not used. 53.9% of menu books did not explain the menus, and 13.2% did not classify the items into groups. Emphasis of profit-making menus was not done in 66.8%. 51.5% of menu books were irreplaceable in parts. The emphasis of profit-making menus was less among the Korean style restaurants (p<0.001). The possibility of partial replacement of menu books was lower in both Korean and Chinese restaurants (p<0.001). The explanation of the items was lower in the Japanese restaurants (p<0.001). The classification of items into groups was lower in cafeteria (p<0.001). In cases in which there were both seasonal and event menus, the possibility of partial replacements of menu books was higher (p<0.001). Restaurants of which service level was less than ordinary were lower in the differentiation of type sizes (p<0.001), the use of photos (p<0.001), the explanation of menus (p<0.001), the classification of menus by groups (p<0.05), the emphasis of profit-making menus (p<0.001) and the possibility of partial replacement of menu books (p<0.001). If these study findings are applied to the designing of menu books, the role of the menu book as an important tool for marketing could be greatly improved.

• Clinical and Experimental Reproductive Medicine
• /
• v.17 no.1
• /
• pp.57-63
• /
• 1990

The purpose of this study is to improve fertilization rate in IVF-ET program of patients with male infertility used micromanipulation technique, partial zona dissection (PZD) or micro-insemination by sperm transfer (MIST). The results were as follows 1. The fertilization rate of non-micromanipulated oocytes and micromanipulated (PZD) oocytes were 12.5% (n=2) and 42.2% (n=19), respectively, and showed significant differences between two groups (p<0.05). 2. The fertilization rate of micromanipulated (MIST) oocytes was 30% (n=27). 3. The damage rate of Group 1 (PZD) and Group 2 (MIST) were 15.7% (3/19) and 29.6% (8/27), respectively. 4. One pregnancy resulted following replacement of micromanipulated (MIST) embryos in 4 patients.

• Culinary science and hospitality research
• /
• v.24 no.3
• /
• pp.83-92
• /
• 2018

Sweet pumpkin yanggaeng were produced with stevia leaf powder as a partial sugar replacer(0 to 20% sucrose weight) and antioxidant. Characteristics of the yanggaeng were compared in moisture, total soluble solids, pH, color, texture, antioxidant properties, and preference scores. Moisture and total soluble solids were proportionally increased with increasing addition of stevia leaf powder(p<0.001). pH of control (without stevia) and SLP20(with 20% replacement of sucrose) were 7.05 and 6.82, respectively. L-value, a-value, and b-value were decreased with increasing amount of stevia leaf powder (p<0.001). Antioxidant activities (total polyphenols and DPPH radical scavenging activity) were gradually increased as more stevia leaf powder included in the yanggaeng(p<0.001). SLP20 being significantly different from others (p<0.001) had the highest values of hardness and chewiness, but there was no significant difference between cohesiveness and adhesiveness among samples. SLP4 had the highest preference in appearance and texture, otherwise SLP8 did the highest scores in flavor, sweetness and overall preference. SLP8, in which 8% sucrose was replaced with stevia leaf powder, was considered to be the most desirable for production of sweet pumpkin yanggaeng.

• BMB Reports
• /
• v.33 no.2
• /
• pp.162-165
• /
• 2000

Polymerase chain reaction (PCR) is well established as an indispensable tool of molecular biology; and yet a limitation for cloning applications continues to be that products often require subsequent restriction to be that products often require subsequent restriction digests, blunt-end ligation, or the use of special linear vectors. Here a rapid, PCR-based system is described for the simple, restriction enzyme-free generation of synthetic, 'restriction-like' DNA fragments with staggered ends. Any 3'- or 5'-protruding terminus, but also non-palindromic overhangs with an unrestricted single strand length are specifically created. With longer overhangs, "Restriction-PCR" does not even require a ligation step prior to transformation. Thereby the technique presents a powerful tool e.g. for a successive, authentic reconstitution of sub-fragments of long genes with no need to manipulate the sequence or to introduce restriction sites. Since restriction enzyme-free and thereby devoid the limitations of partial DNA digests, "Restriction-PCR" allows a straight one-step generation and cloning of difficult DNA fragments that internally carry additional sites for specific sequence insertions or deletions can be precisely engineered into genes of interest. With these properties "Restriction-PCR" has the potential to add significant speed and versatility to a wide variety of DNA cloning applications.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.1
• /
• pp.15-26
• /
• 2014

In order to study the capacities of a new occurrence of Brazilian clay samples as partial replacements of cement, a bentonite sample was selected for utilization in the natural and modified forms for present study. The natural bentonite (BBT) was modified by anchorament of 3-aminopropyltrietoxisilane ($BBT_{APS}$) and 3,2-aminoethylaminopropyltrimetoxisilane (BBTAEAPS) in the surface of component minerals of bentonite sample. The original and organo-bentonite samples were characterized by elemental analysis, scanning electron microscopic and textural analyses. The values of micropore area were varying from $7.2m^2g^{-1}$ for the BBT to $12.3m^2g^{-1}$ for the $BBT_{AEAPS}$. The bentonite samples were characterized by the main variable proportion of bentonite in the natural and intercalated forms (2, 5, 10, 15, 20, 25, 30, and 35 % by weight of cement) in the replacement mode whiles the amount of cementations material. The workability, density of fresh concrete, and absorption of water decreased as the substitution of ordinary Portland cement by perceptual of natural and modified bentonite increased. The results reveal that workability decreased with decrease of the amount of natural bentonite in the concrete, same behavior is observed for bentonite functionalized, varying from 49 to 28 mm. The energetic influence of the interaction of calcium nitrate in the structure of blends was determined through the calorimetric titration procedure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.503-504
• /
• 2006

This paper describes a low-level partial discharge(PD) testing that has been accepted as a non-destructive test method on insulation performance of electronic components. A comparative PD analysis combined with the Withstand Voltage Test (WVT) specified in IEC standards is carried out on high frequency switching transformers. The analysis shows that insulation degradation of the transformers under test progresses during the WVT. To avoid insulation degradation of the specimen, PD test has to be carried out at as low voltage as possible. In this study, the PD test on the transformers is performed in ranges from 50% to 70% of the test voltage specified in the WVT by measuring apparent charges below 1 pC. From the experimental results, it is expects that the low-level PD test is applicable for electronic components as a replacement of the WVT.

• Advances in concrete construction
• /
• v.11 no.1
• /
• pp.59-71
• /
• 2021

This research aims to study the utilization of olive waste ash (OWA) in the production of concrete as a partial substitute for cement. Effects of using OWA on the physical and mechanical properties of concrete mixtures have been investigated. This is done by carrying out tests involving the addition of various percentages of OWA to cement (0%, 5%, 10% and 15%). For each percentage, tests were performed on both fresh and hardened concrete; these included slump test, unit weight test and compressive strength test after 7, 28 and 90 days. Durability tests were investigated in solutions containing 5% NaOH and MgSO4 by weight of water. In addition, resistance to high temperatures was tested by subjecting the cubes to high temperatures of up to 170℃. The results of this research indicate that a higher percentage of OWA gives a lower compressive strength and lower workability but higher performance in terms of durability against both different weather conditions and high temperatures.