• 공업화학
• /
• 제2권4호
• /
• pp.330-339
• /
• 1991

$V_2O_5-TiO_2/SiO_2$ 촉매를 제조하여 그 산특성을 조사하였고, 동 촉매상에서 o-자일렌의 무수프탈산으로의 부분산화반응에 대한 활성측정을 병행하여 촉매의 산특성과 반응성과의 연관성을 알아보았다. $V_2O_5$ 촉매는 V=O로 추정되는 약산점과 V-O-V로 추정되는 강산점을 가지고 있었으며, 소성온도가 높아질수록 약산점의 양이 감소하였다. $V_2O_5-TiO_2/SiO_2$ 촉매의 경우 약산점이 크게 나타났으며, 그 양은 $SiO_2$의 담지량이 20 mole% 일 때 최대치를 보였고 그 이상에서 일정하였다. 한편, o-자일렌 부분산화반응에서 $V_2O_5-TiO_2/SiO_2$는 $V_2O_5/SiO_2$에 비해 전체 전환율 및 무수프탈산으로의 선택도를 크게 증가시켰으며, $V_2O_5-TiO_2/SiO_2$에서 $TiO_2$의 양이 증가할 경우 전체 전환율은 증가하였으나 무수프탈산으로의 선택도는 크게 변하지 않았다. V=O로 추정되는 약산점은 o-자일렌을 약하게 흡착함으로써 무수프탈산으로의 부분산화반응을, V-O-V로 추정되는 강산점은 o-자일렌을 보다 강하게 흡착하여 $C_1$으로의 완전산화반응을 각각 유도함을 알 수 있었다.

• 한국세라믹학회지
• /
• 제44권2호
• /
• pp.79-83
• /
• 2007

To fabricate a thick, porous yttria-stabilized zirconia without cracking and warping, a method for the simultaneous control of the porosity and shrinkage was designed. As a pore former, a potato starch was used. For the control of shrinkage the oxidation of Al metal particles was used. For the sintering of the above powder mixtures, a partial sintering technique was used at $1300^{\circ}C$ for 10 min in air. Upon adding the additives, high open porosity above 53% and a low shrinkage level were obtained. As a result cracking and warping of the sintered body were deterred. This outcome most likely resulted from the compensation of sintering shrinkage due to the volume expansion caused by oxidation of the Al metal particles during heat-treatment.

• 한국가스학회지
• /
• 제8권3호
• /
• pp.52-56
• /
• 2004

팔라듐 촉매는 주로 수소화 반응, 산화반응, 저온 연소반응 등에 사용된다. 특히 최근에 연료전지에 많이 시도되고 있는 알코올 등의 개질을 통한 수소가스의 발생을 할 경우에도 이 팔라듐 촉매의 가능성에 상당한 관심이 증폭되어 왔다. 귀금속 촉매인 팔라듐 촉매가 성능이 우수하지만 고가이고 내구성과 소성후의 성능저하 등이 해결해야 할 과제로 남아 있다. 본 연구에서는 내구성과 소성 후에도 성능의 저하가 없는 팔라듐 촉매를 합성하고 반응성을 연구하였다.

• Archives of Pharmacal Research
• /
• 제1권1호
• /
• pp.27-32
• /
• 1978

A procedure of $^3H$-radio labeling synthesis for the dammarane triterpene glycosides of Korean ginseng was established by using the ginsenoside $Rg_1$ as starting material. The protons in $C-{11}$ and $C_{13}$ of the aglycone moiety of the glycoside were exchanged with tritium by keto-enol tautomerization of 12-keto-ginsenoside $Rg_1$ which was prepared by partial acetylation, Sarett oxidation and saponification, producing nona-acetate, nonaside $Rg_1$. The acety1-ketone and 12-keto-derivative of ginsenotritated ketone was reduced by metallic sodium and isoproponol to produce the end product $^3H$-ginsenoside $Rg_1$ with 3% radio-chemical recovery in one experiment.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.327-328
• /
• 2006

We have demonstrated that textured $Al_2O_3-mullite-SiC$ nanocomposites can be fabricated by slip casting followed by partial oxidation - reaction sintering of mixed suspensions of $Al_2O_3$ and SiC powders in a high magnetic field. The sintered density was changed by the degree of oxidation at 1200C and 1300C. The degree of orientation of alumina in the nanocomposite was examined on the basis of the X-ray diffraction patterns and scanning electron micrographs. It is confirmed that alumina-oriented nanocomposites were fabricated. The three-point bending strength at room temperature was observed for the nanocomposites.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.455-456
• /
• 2006

We have demonstrated that textured $Al_2O_3-mullite-SiC$ nanocomposites can be fabricated by slip casting followed by partial oxidation. reaction sintering of mixed suspensions of $Al_2O_3$ and SiC powders in a high magnetic field. The sintered density was changed by the degree of oxidation at 1200C and 1300C. The degree of orientation of alumina in the nanocomposite was examined on the basis of the X-ray diffraction patterns and scanning electron micrographs. It is confirmed that aluminaoriented nanocomposites were fabricated. The three-point bending strength at room temperature was observed for the nanocomposites.

• Corrosion Science and Technology
• /
• 제17권5호
• /
• pp.218-224
• /
• 2018

Alloy 617 is a candidate Ni-based superalloy for intermediate heat exchanger (IHX) of a high-temperature gas reactor (VHTR), because of its good creep strength and corrosion resistance at high temperature. Small amount of impurities such as $H_2O$, $H_2$, CO and $CH_4$ are introduced inevitably in helium, as a coolant during operation of a VHTR. Reactions of material and impurities are accelerated with increase of temperature to $950^{\circ}C$ of operating temperature of a VHTR, leading to material corrosion aggravation. In this circumstance, high-temperature corrosion tests were performed at $950^{\circ}C$ in air and impure helium environments, up to 250 hours in this study. Oxidation rate of $950^{\circ}C$ in an air environment was higher than that of impure helium, explained by difference in outer oxide morphology and microstructure as a function of oxygen partial pressure. An equiaxed Cr-rich surface oxide layer was formed in an air environment, and a columnar Cr-rich oxide was formed in an impure helium environment.

• 한국안전학회지
• /
• 제6권3호
• /
• pp.27-34
• /
• 1991

이 논문은 폴리에틸렌 필름을 염소처리해서 부분방전에 대한 내산화폭성 및 염소처리필름과 ${\gamma}$선조사 필름의 분자운동에 대해 조사한 것이다. 1. 열소처리한 PE 필름의 표면을 연마해서 C-Cl 이 10 $\mu$m깊이까지 분포하고 있음을 알았다. 2. 염소화가 진전하면 결정화도가 감소하며 가교가 발생한다. 3. 염소화 PE는 부분 방전에 의해 생기는 오존의 산화를 억제하고, 자신은 결합했던 염소를 잃는다. 4. 염소처리를 행하며 PE 의 CH2 주쇄의 운동인 ${\gamma}$ 흡수가 염소치환에 의해 감소한다.

• Journal of Microbiology and Biotechnology
• /
• 제16권3호
• /
• pp.469-474
• /
• 2006

Partial nitrification blocking of the oxidation of nitrite ($NO_{2}^{-}$) to nitrate ($NO_{3}^{-}$) has cost-efficient advantages such as lower oxygen and organics demand for nitrification and denitrification, respectively. A nitrifying membrane bioreactor of submerged type was operated for the treatment of synthetic ammonium wastewater with the purpose of nitrite build-up without affecting the efficiency of ammonium oxidation. A high ammonium concentration (1,000 mg/l) was completely converted to nitrate at up to 2 kg $N/m^3$ day under sufficient aeration. The control of pH under sufficient aeration was not a reliable strategy to maintain stable nitrite build-up. When the dissolved oxygen concentration was kept at 0.2-0.4 mg/l by adjusting the aeration rate, about 70% of nitrite content was obtained with ammonium oxidation efficiency higher than 93%. The increase of suction pressure due to membrane fouling was not significant under lowered aerating environment over a 6-month period of operation. The composition of nitrifier community, including relative abundance of nitrite oxidizers in a nitrite-accumulating condition, was quantified by fluorescence in situ hybridization analysis.

• Environmental Engineering Research
• /
• 제19권1호
• /
• pp.23-29
• /
• 2014

In this study, aerobic granules were applied to a lab-scale aerobic granule sludge airlift reactor (AGSAR) and the ammonium nitrogen oxidation performance was evaluated at different ammonium nitrogen loading rate (NLR). At least 99% of the initial ammonium nitrogen was oxidized at an NLR of 0.27 and 0.53 kg $NH_4{^+}-N/m^3{\cdot}day$, for both aerobic granules (control), and nitrifying aerobic granules (NAGs). The ammonium nitrogen oxidation deteriorated, when the NLR was increased to 1.07 kg $NH_4{^+}-N/m^3{\cdot}day$. The NAGs were characterized by complete nitrification, while partial nitrification was observed in the control.