• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.90-93
• /
• 2002

The sintering process of BSCCO 2223 tapes is a complex process that is very sensitive to parameters, such as temperature, oxygen partial pressure, heating and cooling rate and holding time. During the first heat treatment, 2212 phase of precursor powder is partially transformed into 2223 phase and some residual secondary phases, such as $(Bi,Pb)_2$$Sr_2$CuO／sub y／(2201), $(Ca,Sr)_2$CuO／sub y／(2/1AEC), (Ca,Sr)／sub 14／Cu／sub 24／O／sub 41／(14／24 AEC) etc. The secondary phases are difficult to be removed from the BSCCO 2223 matrix on the heat treatment. These secondary phases degrade the critical current density. In order to minimize the amount and size of alkaline earth cuprate(AEC) particles step heat treatment is applied during the first heat treatment under the varying atmosphere. Experimental results showed that by adapting the step heat treatment process, the amount and particle size of the secondary phases in the final tapes are decreased. Consequently, the BSCCO 2223grain texture and Jc properties are improved.

• Korean Journal of Microbiology
• /
• v.14 no.2
• /
• pp.84-94
• /
• 1976

Cellulase components, CMCase(Cx) and Avicelase$(C_1)$, were partially prueified, from the culture extract of a strain of Trichoderma koningii by column chromatography on DEAE-Sephadex A-50 and the step of gel filtration through Sphadex G-150, Optimum pH of CMCase was 5.2 and Avicelase showed the highest activity at pH 5.6 in acetate buffer. Optimal temperatures for activities of CMCase and Avicelase were $50^{\circ}C\;and\;60^{\circ}C, $ respectively. More than 70% of the activities of two enzymes were remained after heating at $60^{\circ}C$ for 30 min and Avicelase is more stable than any other fungal enzymes. The Michaelis constants, Km, of CMCase and Avicelase were 0.116% of CMC and 0.281% of avicel. And also the values of maximum velocity, Vmax, of CMCase and Avicelase were $23.20{\mu}g\;and\;2.54{\mu}g$ of reducing sugar per min. Of the metal ions tested against the activites of CMCase and Avicelase, $Cu^{++}, \; Hg^{++}, \;and\;Pb^{{++}$ are remarkably effective inhibitors. The molecular weights of Cx and $C_1$ component were estimated to be about 47, 000 and 61, 000 by gel filtration method.

• Journal of the Korean Society of Food Culture
• /
• v.12 no.4
• /
• pp.375-382
• /
• 1997

The establishment of optimal producing condition for rice-based infant foods using modified rice powder was attempted. The modification of rice powder was prepared by microwave heating as well as partial enzymatic hydrolysis. Not only thermal treatment but also enzymatic hydrolysis on rice powder increased D.E. value from 1.25 to 3.81. The water binding capacity, swelling power, solubility, digestibility by ${\alpha}-amylase$, light transparency, and paste clarity of the modified rice powder compared to unmodified rice powder were increased from 107% to 249%, from 7.80 to 42.52, from 0.04% to 0.89ft, from 9.19% to 23.01, from 33% to 42%, and from 2.2% to 3.9%, respectively. On the other hand, gelatinization temperature, apparent viscosity, and degree of retrogradation of modified rice powder showed negative correlation with D.E. value. The 「results suggested that the thermal and enzymatic treatment on rice powder improved the physicochemical properties of rice based infant food by enhancing carbohydrate absorptionability and lowering the viscosity and opacity.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.5
• /
• pp.171-178
• /
• 2008

The combustion and exhaust emission characteristics were investigated in an DME fueled HCCI engine. Carbon dioxide, nitrogen and mixed gas, which was composed of carbon dioxide and nitrogen, were used as control parameters of combustion and exhaust emission. As the oxygen concentration in induction air, which was occurred by carbon dioxide, nitrogen and mixed gas, was reduced, the start of auto-ignition was retarded and the burn duration was extended due to obstruction of combustion and reduction of combustion temperature. Due to these fact, indicated mean effective pressure was increased and indicated combustion efficiency was decreased by carbon dioxide, nitrogen and mixed gas. In case of exhaust emission, hydrocarbon and carbon monoxide was increased by reduction of oxygen concentration in induction air. Especially, partial burning was appeared at lower than about 18% of oxygen concentration by supplying carbon dioxide. However it was overcome by intake air heating.

• Food Science of Animal Resources
• /
• v.36 no.2
• /
• pp.178-185
• /
• 2016

The influence of three cooking methods (stewing, microwaving and Aluminium (Al) foil-baking) was evaluated on the content of intramuscular lipid and the composition of intramuscular fatty acids of Hyla rabbit. The percentage of intramuscular lipid in cooked-longissimus dorsi (LD) (dry weight %) were in the order mentioned below: microwaving > foil-baking > stewing. All treated samples showed decrease in the proportion of polyunsaturated fatty acids (PUFA) and monounsaturated fatty acids (MUFA), whilst increase in the proportion of saturated (SFA) and n-6/n-3 value during processing. All of the cooked samples had the n-6/n-3 ratio within the recommended range (5-10). By the analysis of partial least squares regression (PLSR), the microwaving treatment was better to keep the stability of unsaturated fatty acids (UFA), whilst the long-time Al foil-baking did the most serious damage to UFA, especially the PUFA. In addition, the heating method showed greater influence on the samples than the processing time. The shorter processing time was better to retain the intramuscular PUFA of Hyla rabbit, especially the LC-PUFAs (C20-22). Considering all the factors, microwaving showed the superiority in reserving the composition of intramuscular fatty acids of Hyla rabbit.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.8 no.2
• /
• pp.27-35
• /
• 2012

Five zero energy house models developed in Korea for the purpose of the energy performance were compared and analyzed in the study. The standard passive house model applying common technology and efficient energy performance elements was proposed. Standard passive house 5 models have been developed commonly aiming at 100% energy saving, applying high-performance and high-efficiency exterior thermal insulation, using 3 low-e coated window system, and targeting average 0.65 ACH to enhance privacy. Energy recovery ventilators and dry and cold radiant heating floor has been partially applied. Eco-design techniques such as the awning device, heat insulating door, using natural light have been used. Solar and geothermal systems as the application of renewable energy technologies have been commonly applied. And fuel cells were applied to a partial model. The standard model based on common technical elements and average performance of each element and obtained from five model analysis has been proposed in the study.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.342-347
• /
• 2004

The deformation behavior of a $Zr_{55}Al_{10}Ni_5Cu_{30}$ bulk metallic glass under tensile loading at different range of strain rates and temperatures between 680 K and 740 K were investigated. The variation in the deformation behavior of $Zr_{55}Al_{10}Ni_5Cu_{30}$ bulk metallic glass which resulted from the crystallization induced during testing was reported. The$Zr_{55}Al_{10}Ni_5Cu_{30}$ bulk metallic glass has showed either homogeneous or inhomogeneous deformation depending on test condition. It exhibited a maximum elongation of about 560 % at the condition of $407^{\circ}C{\times}\;10^{-4}/s$. The flow behavior exhibited three different types and the flow stress became lower at higher temperatures and lower strain rates. The increase of the time elapsed during heating resulted in the partial crystallization of bulk metallic glass phase and eventually strain hardening and brittle fracture.

• Solar Energy
• /
• v.12 no.2
• /
• pp.1-8
• /
• 1992

Identifying characteristics of heating and cooling systems requires estimation of thermal load of specific time interval, especially in cases that its system is operated intermittently, by using thermal storage, of in a partial load condition. Estimating the thermal load, however, needs to forecast hourly weather data variation. Hence, this paper attempts to examine characteristics of hourly ourdoor temperature variation as a preliminary research for the mathematical modeling of the hourly weather variation. Speculating characteristics of daily minimum and maximum temperature occurances, hourly outdoor temperature variation, and daily temperature differences in the increasing range ($07h{\sim}15h$) and decreasing range($15h{\sim}07h$), we were able to analyze changing patterns of daily temperature differences in each range in terms of daily solar amount, cloud ratio, and other weather data. Results from the multiple regression analysis enables us to conclude that daily differences in the increasing range are strongly affected last night temperature itself while the other range's differences are influenced by many weather data, which are solar amount, the variation of cloud, and the maximum temperature of the previous day.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.292-300
• /
• 2014

The Laplace Transform solution is used as a mathematical model to analyse the thermal performance of the building constructed using different wall materials. The solution obtained from Laplace Transform is an analytical solution of an one dimensional, linear, partial differential equation for wall temperature profiles and room air temperatures. The main purpose of the study is showing the detail of obtaining solution process of the Laplace Transform. This study is conducted using weather data from two different locations in Korea: Seoul, Busan for both winter and summer conditions. A comparison is made for the cases of an on-off controller and a proportional controller. The weather data are processed to yield hourly average monthly values. Energy consumption load is well calculated from the solution. The result shows that there is an effect of mass on the thermal performance of heavily constructed house in mild weather conditions such as Busan. Building using proportional control experience a higher comfort level in a comparison of building using on-off control.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.3
• /
• pp.226-233
• /
• 2021

This article aimed at thermally treating and charactering the Eucalyptus grandis wood under three different temperatures. For this, pristine eucalypt samples were treated by heating in a laboratory oven at 160 ℃, 200 ℃ and 240 ℃, always for 2 h. Treatment parameters (based on weight percentage loss and specific gravity), as well as mechanical (by hardness tests), chemical (by infrared spectroscopy), thermal (by thermogravimetry), and colorimetric (by CIELab method) features were evaluated. Compared to the pristine ones, the treated woods have there was a drop in apparent density at 12 % and consecutively greater thermal stability which is probably related to a previous partial degradation of some major amorphous components (namely cellulose, hemicellulose and lignin), as suggested by the treatment parameters and infrared spectra. Besides of that, the higher the temperature treatment, the higher the loss in surface hardness and the higher the colour darkening.