• 터널과지하공간
• /
• 제25권6호
• /
• pp.496-504
• /
• 2015

로드헤더는 커팅헤드에 픽커터를 설치하여 지반을 굴착하는 장비이다. 픽커터는 일반적으로 코니컬타입을 사용하며, 코니컬 픽커터는 선단부에 마모에 강한 텅스텐카바이드 팁을 사용하여 커터의 소모를 감소시키는 굴착 도구이다. 본 연구에서는 구리광산의 망토와 역암으로 구성된 복합지반을 대상으로 로드헤더 커팅헤드에 3종류의 코니컬 픽커터를 사용하여 내구성능을 살펴보았다. 현장적용 후, 픽커터의 육안조사와 중량감소율 측정, 그리고 CT 및 SEM을 이용한 내 외부 균열조사를 수행한 결과, 하드페이싱으로 보강한 코니컬 픽커터의 내구성능이 가장 우수하였으며, 각 코니컬 픽커터의 내 외부에서는 현장적용 전과 후 모두에서 매크로 크랙 및 미세균열을 발견할 수 없었다.

• 대한기계학회논문집A
• /
• 제36권3호
• /
• pp.253-258
• /
• 2012

주조 유동 해석 분야에서 형상 고정 격자계(body-fitted coordinate; BFC)의 적용은 양질의 해석결과를 얻을 수 있음에도 불구하고 격자 생성의 어려움과 효율성으로 인해 많이 사용되지 않고 있다. 반면에 직교 격자계(Cartesian coordinate)는 상대적으로 격자 생성이 쉽고 빠르기 때문에 주조 공정에서 주로 사용되어 왔으나 이 역시 형상을 제대로 표현하지 못함으로써 발생하는 문제들로 인해 올바른 해석 결과를 얻을 수가 없다. 본 연구에서는 PCT(Partial Cell Treatment)를 기반으로 하는 Cut Cell 방법을 직교 격자계에 적용함으로써 이 격자계의 장점은 유지하면서도 정확한 유동 해석 결과를 얻을 수 있었다. Cut Cell 방법으로 간단한 형상의 테스트와 실제 주조 제품에 대한 적용을 해보았다.

• 분석과학
• /
• 제33권2호
• /
• pp.98-107
• /
• 2020

Methamphetamine (MA) is currently the most abused illicit drug in Korea. MA is produced by chemical synthesis, and the final target drug that is produced contains small amounts of the precursor chemicals, intermediates, and by-products. To identify and quantify these trace compounds in MA seizures, a practical and feasible approach for conducting chromatographic fingerprinting with a suite of traditional chemometric methods and recently introduced machine learning approaches was examined. This was achieved using gas chromatography (GC) coupled with a flame ionization detector (FID) and mass spectrometry (MS). Following appropriate examination of all the peaks in 71 samples, 166 impurities were selected as the characteristic components. Unsupervised (principal component analysis (PCA), hierarchical cluster analysis (HCA), and K-means clustering) and supervised (partial least squares-discriminant analysis (PLS-DA), orthogonal partial least squares-discriminant analysis (OPLS-DA), support vector machines (SVM), and deep neural network (DNN) with Keras) chemometric techniques were employed for classifying the 71 MA seizures. The results of the PCA, HCA, K-means clustering, PLS-DA, OPLS-DA, SVM, and DNN methods for quality evaluation were in good agreement. However, the tested MA seizures possessed distinct features, such as chirality, cutting agents, and boiling points. The study indicated that the established qualitative and semi-quantitative methods will be practical and useful analytical tools for characterizing trace compounds in illicit MA seizures. Moreover, they will provide a statistical basis for identifying the synthesis route, sources of supply, trafficking routes, and connections between seizures, which will support drug law enforcement agencies in their effort to eliminate organized MA crime.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 제11차 KACG 학술발표회 Crystalline Particle Symposium (CPS)
• /
• pp.285-309
• /
• 1996

Non oxide ceramics such as nitrides of transition metals have shown significant potential for future economic impact, in diverse applications in ceramic, aerospace and electronic industries, as refractory products, abrasives and cutting tools, aircraft components, and semi-conductor substrates amid others. Combustion synthesis has become an attractive alternative to the conventional furnace technology to produce these materials cheaply, faster and at a higher level of purity. However he process os highly exothermic and manifests complex dynamics due to its strongly non-linear nature. In order to develop an understanding of this process and to study the effect of operational parameters on the final outcome, numerical modeling is necessary, which would generated essential knowledge to help scale-up the process. the model is based on a system of parabolic-hyperbolic partial differential equations representing the heat, mass and momentum conservation relations. The model also takes into account structural change due to sintering and volumetric expansion, and their effect on the transport properties of the system. The solutions of these equations exhibit steep moving spatial gradients in the form of reaction fronts, propagating in space with variable velocity, which gives rise to varying time scales. To cope with the possibility of extremely abrupt changes in the values of the solution over very short distances, adaptive mesh techniques can be applied to resolve the high activity regions by ordering grid points in appropriate places. To avoid a control volume formulation of the solution of partial differential equations, a simple orthogonal, adaptive-mesh technique is employed. This involves separate adaptation in the x and y directions. Through simple analysis and numerical examples, the adaptive mesh is shown to give significant increase in accuracy in the computations.

• Geomechanics and Engineering
• /
• 제15권5호
• /
• pp.1113-1124
• /
• 2018

Geological dynamic hazards during deep coal mining are caused by the failure of a composite system consisting of the rock and coal layers, whereas the joint in coal affects the stability of the composite system. In this paper, the compression test simulations for the rock-coal combined body with single joint in coal were conducted using $PFC^{2D}$ software and especially the effects of joint length and joint angle on strength and failure characteristics in a rock-coal combined body were analyzed. The joint length and joint angle exhibit a deterioration effect on the strength and affect the failure modes. The deterioration effect of joint length of L on the strength can be neglected with a tiny variation at ${\alpha}$ of $0^{\circ}$ or $90^{\circ}$ between the loading direction and joint direction. While, the deterioration effect of L on strength are relatively large at ${\alpha}$ between $30^{\circ}$ and $60^{\circ}$. And the peak stress and peak strain decrease with the increase of L. Additionally, the deterioration effect of ${\alpha}$ on the strength becomes larger with the increase of L. With the increase of ${\alpha}$, the peak stress and peak strain first decrease and then increase, presenting "V-shaped" curves. And the peak stress and peak strain at ${\alpha}$ of $45^{\circ}$ are the smallest. Moreover, the failure mainly occurs within the coal and no apparent failure is observed for rock. At ${\alpha}$ between $30^{\circ}$ and $60^{\circ}$, the secondary shear cracks generated in or close to the joint tips, cause the structural instability failure of the combined body. Therefore, their failure models present as a shear failure along partial joint plane direction and partially cutting across the coal body or a shear failure along the joint plane direction. However, at ${\alpha}$ of $60^{\circ}$ and L of 10 mm, the "V-shaped" shear cracks cutting across the coal body cause its final failure. While crack nucleations at ${\alpha}$ of $0^{\circ}$ or $90^{\circ}$ are randomly distributed in the coal, the failure mode shows a V-shaped shear failure cutting across the coal body.

• Journal of Chest Surgery
• /
• 제23권2호
• /
• pp.231-235
• /
• 1990

Segmental resection or wedge resection of the lung and direct cutting across of bronchi frequently results in postoperative airleaks or bronchopleural fistula in some cases. Many methods have been devised to handle air leak problems by oversuturing the raw edges, the application of pleural onlay flaps, the use of cautery or tissue adhesives, but these still has not solved the problem of air leaking from raw surfaces of the lung with only partial successful we have tried the use of histoacryl to closure the raw surface of the resected lung and compared it’s results with of the closure with chromic catgut sutures in cats from May 1989 to Jan. 1990 at the department of the thoracic and cardiovascular surgery, Yonsei University, College of Medicine. Ninety lobe of the lungs were used in this study and forty nine of which have been divided segmentally and closed with histoacryl on the raw surfaces. Forty one of which have been divided segmentally and closed with sutures using chromic catgut for control. There were air leakages in twelve cases among 49 cases with applying histoacryl and airleak were in two cases among 12 cases with reapply histoacryl, But there were air leak in two cases among 41 cases with sutures using chromic catgut and airleak were in one case among with resutures using chromic catgut.

• 한국주조공학회지
• /
• 제29권1호
• /
• pp.33-37
• /
• 2009

Cartesian grid system has mainly been used in the casting simulation even though it does not nicely represent sloped and curved surfaces. These distorted boundaries cause several problems. A special treatment is necessary to clear these problems. In this paper, we propose a new method that can consider the cutting cells which are cut by casting and mold based on the partial cell treatment (PCT). This method provides a better representation of geometry surface and will be used in the computation of velocities that are defined on the cell boundaries in the Cartesian grid system. Various test examples for several casting process were computed and validated. The analysis results of more accurate fluid flow pattern and less momentum loss owing to the stepped boundaries in the Cartesian grid system were confirmed. By using the cut cell method, performance of computation gets better because of reducing the whole number of meshes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.171-178
• /
• 2005

It is unavoidable to be formed slopes under special circumstance of Korea where 70% of the whole area are composed of mountains when civil engineering projects such as roads, site developments are increased with industrial development and horizontal expansions of urban area. Moreover, stability of the slopes become one of quite important issues under special meteorological characteristics that over two-thirds of annual average rainfall are concentrated in summer season and the localized torrential downpour are getting more frequent recently. Resulting in these circumstances, partial slope failures by debris flow of the high water content soils are occurred frequently in cutting soil slopes. In this case of debris flow slope failure, slope declination method are selected for their stable recovery because it is impossible to recover entirely by existing recovery methods. Seeding or special grass planting methods are followed separately without exception. The method by which entire recover with bigger stability ratio would be possible and grass planting work would be done simultaneously is developed. In this study, the results of the tests including a real construction history in a failed slope using developed method are described

• 정보처리학회논문지B
• /
• 제13B권2호
• /
• pp.115-120
• /
• 2006

이 논문에서 겹쳐지고 잘린 이미지내의 타원형 객체들 가운데 부분적으로 겹쳐져 보이지 않는 외형과 영역을 재구성하고 계산하기 위한 방법을 제안한다. 대칭적인 속성에 기반을 두고, 불완전한 객체 인식을 위해 타원형 객체의 윤곽에 기반을 둔 방법이다. 이 방법은 한 객체 안에서 대칭 축을 이용하는 영역 복사를 통한 겹쳐져 보이지 않는 영역을 재구성하는 간결한 기교를 제공한다. 부분적으로 겹쳐져 보이지 않는 영역에 대한 측정된 변수에 기반을 두고, 분류 트리의 객체 인지를 수행하는데, 이 방법은 통계 수치보다 대칭에 기반을 둔 객체 재구성에 의존하기 때문이다. 이는 크기 변경과, 객체의 자세, 회전, 등에서 비록 객체 자세에는 한계를 가지고 있지만 부분적으로 겹쳐져 보이지 않는 객체의 인지에서 탁월하다.

• 한국임상수의학회지
• /
• 제33권6호
• /
• pp.376-380
• /
• 2016

A 12-year-old spayed, female Siberian Husky dog weighing 40 kg was referred for sudden collapse without a traumatic history. A splenic mass and hemoperitoneum were identified by ultrasonography and abdominocentesis at a local animal hospital. Emergency exploratory laparotomy was performed once the patient was stabilized. A splenic mass and engorged hepatic mass in the torsed left liver lobe were identified. Partial hepatic lobectomy of the left lateral lobe was performed using a laparoscopic linear self-cutting stapler and the spleen was also removed using an ultrasonic scalpel. Histopathologic examination revealed a diagnosis of splenic hemangiosarcoma with metastasis to the liver. Chemotherapy was not performed because the client did not give consent. The patient was checked regularly until death on POD 324. The metastatic nodules had spread to the lungs and other liver lobes and had gradually increased in size. Liver lobe torsion is a rare condition in dogs, especially accompanying neoplasia. This case supports a potential relationship between liver lobe torsion and neoplastic liver mass in dogs.