• 설비공학논문집
• /
• 제17권3호
• /
• pp.216-222
• /
• 2005

An experimental investigation was executed to determine the capacity degradation due to fin conduction and non-uniform refrigerant distribution in a multi-path evaporator with cross-counter flow. The finned-tube evaporator, which had a three-path and three-depth-row, was tested by controlling inlet quality, exit pressure, and exit superheat for each refrigerant path. The capacity reduction due to superheat unbalance between each path was as much as $25\%$ for non-cutting evaporator, even when the overall evaporator superheat was kept at a target value of $5.6^{\circ}C$. It indicates that the internal heat transfer within the evaporator assembly causes the partial capacity drop. The capacity of cutting-evaporator with respect to non-cutting evaporator was enhanced according to the increment of air flow rate when superheat or superheat unbalance increased.

• 디지털융복합연구
• /
• 제13권4호
• /
• pp.303-310
• /
• 2015

최근 게임 기술은 모의 수술 시뮬레이션이나 사이버 모델하우스 구축 등의 여러 응용 분야에까지 적용되어지고 있다. 이러한 응용 분야에서 꼭 필요하고 중요한 기술 중 하나는 3D 모델을 실시간으로 절단하는 것이다. 실시간 모의 절단 기술은 자동차나 건축물의 실시간 해체 시뮬레이션 구축에 꼭 필요하며, 다양한 융복합 산업 분야에서 응용이 가능하다. 기존의 BSP-Tree를 이용한 절단 기법에서는 무한 평면을 기준으로 3D 모델을 두 부분으로 절단시키기 때문에 일반적인 절단 작업에 유용하게 사용하기 어렵다. 본 논문에서는 이러한 문제점을 해결하기 위해 유한한 영역 내에서 3D 모델을 절단하는 기법을 제안하였다. 구체적으로 절단 경로면을 유한하게 정의할 수 있도록 하였으며, 절단 범위 이내에서만 3D 모델을 분열시키도록 하여, 다양한 산업 분야에서 유용하게 사용할 수 있도록 하였다. 본 연구에서 제안한 부분 절단 기법의 유용성을 보이기 위해 원자로 3D 모델의 해체 작업 과정을 모의 시뮬레이션 하는 과정에 적용해 보았다.

• Journal of Biosystems Engineering
• /
• 제28권6호
• /
• pp.497-504
• /
• 2003

The objectives of this study were to develop a harvesting gripper for perilla leaves and test its performance, which was a partial work of the automated perilla leaves harvesting system development. The results of this study could be summarized as the followings: The shear forces for harvesting the perilla were measured. The measured results showed that the average shear force required was 12.13N for cutting the petioles attached to the perilla stalks, and the maximum of 17.42N. The inner diameter of air cylinder used was 6mm and the air pressure was maintained as 0.7㎫ during the tests. The time required for cutting perilla leaves could be adjusted by the control program and cutting operation could be done within 1- 10 seconds. The performance tests were conducted to harvest the perilla leaves by the gripper developed. The average success rates of cutting were 72.2％ for the first test, 78.5％ for the second, and 74.2％ for the last. The perilla leaves were not damaged by the gripper The whole system operation could be finished within three seconds except the delay time for dropping harvested leaves.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.33-42
• /
• 2017

PURPOSES : The purpose of this study is to suggest the construction and quality control method for the re-repair of a deteriorated partial depth repair for sections of Portland cement concrete pavement. METHODS : An experimental construction was conducted to extend the repair width for removing an existing repair section. A removal method was used to ensure early performance for a deteriorated partial depth repair section. Bond strength and split tensile strength were measured at the near vertical interface layer between the existing pavement and repair material. The area was analyzed for various conditions such as the extended repair area and the removing method of the existing repair section. RESULTS : As a result of analysis of bond strength and split tensile strength, the bonding performance of a milling removed section was improved over a cutting and hand breaker removed section. The bond strength was analyzed to increase slightly as the extended repair width for removing the existing repair section increased. The split tensile strength did not show a clear relationship to an increased extended repair width of an existing removed repair section. CONCLUSIONS : The milling removal method should be applied in the removal of existing deteriorated partial depth repair sections. The extended repair width for a re-repair section should be wider than the existing partial depth repair with at least a 75-mm length and width for the bond strength and the split tensile strength.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권7호
• /
• pp.1082-1091
• /
• 2004

Analyzed Parametrically was an internal combustion engine combined with gas turbine the cycle of which is splitted into compression side cylinder and expansion side one, and heat adding of which is during constant volume pressure, temperature process. The advantages of each measures were analyzed by means of thermal cycle diagram. The thermal efficiency of partial load cutting off firstly isothermal heat adding and secondly isobaric heat adding also was analyzed The authors suggested some potentials about the performance as for thermal efficiency, mean effective pressure and reducing emissions and noise supposed were the operating parameter of the engine set to some values and were some problems solved.

• 한국터널지하공간학회 논문집
• /
• 제23권3호
• /
• pp.167-181
• /
• 2021

터널굴착의 경제성 확보 및 굴착 시 발생하는 진동저감을 위해 워터젯 시스템을 활용한 새로운 형태의 암반 굴착공법이 개발되고 있다. 워터젯 절삭을 이용한 효율적인 암반 굴착을 위해서는 워터젯 절삭폭의 중첩과정이 필수적이다. 본 연구는 초고압 연마재 워터젯 시스템을 이용하여 절삭폭 중첩도 및 이격거리에 따른 화강암 시편 절삭실험을 수행하였다. 실험결과를 바탕으로 중첩도 단계에 따른 화강암 절삭성능을 분석하였다. 그리고 형상인자를 절삭깊이, 절삭폭, 그리고 절삭부피로 분류하여 중첩 절삭 후 단면의 형상을 분석하였다. 절삭폭 중첩도가 58% 이하가 되면 중첩이 충분하지 않아 연속적인 암반제거가 불가능하였다. 반면 절삭폭 중첩도 67% 이상에서는 과절삭 현상이 확인되었다. 한편 부분중첩(25~75%) 조건에서는 기존 워터젯 절삭에 비해 효율적인 부피제거가 가능한 것으로 분석되었다. 해당 연구는 워터젯을 활용한 암반 굴착 시 최적 중첩도를 결정하기 위한 중요한 기초자료로 활용될 수 있을 것으로 기대된다.

• 정보처리학회논문지B
• /
• 제15B권2호
• /
• pp.81-86
• /
• 2008

이 논문에서 겹쳐지고 잘린 이미지내의 타원형 객체들 가운데 부분적으로 겹쳐져 보이지 않는 외형과 객체 내 영역을 재구성하고 계산하기 위한 방법을 제안한다. 대칭 속성을 이용하여 부분적으로 겹쳐져 보이지 않는 객체를 인식하기 위해서 객체내의 부분인식에 기반을 둔 방법이다. 이 방법은 객체 내에서 대칭축을 이용하여 영역 복사를 통한 보이지 않는 영역을 복원하는 간결한 방법을 제시한다. 이 방법은 통계적 예측보다 대칭 기반의 객체 복원에 의존하기 때문에 부분적으로 겹쳐져 보이지 않는 부분에 대해서 측정된 변수를 가지고 분류 트리를 이용하여 객체 인식를 수행한다. 이는 비록 객체의 자세에는 한계를 가지고 있지만 크기 변경이나 회전, 시각의 변화에서 부분적으로 가려진 객체를 인식하는데 뛰어난 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.141-159
• /
• 2017

A pick cutter is a rock-cutting tool used in partial-face excavation machines such as roadheaders, and its quality is a key element influencing the excavation performance and efficiency of such machines. In this study, pick cutters with hardfacing deposits applied to a tungsten carbide insert were made with aim of increasing their durability and wear resistance. They were field-tested by being installed in a roadheader and compared with conventional pick cutters under the same excavation conditions for 24 hours. The hardfaced pick cutters showed much smaller weight loss after excavation, and therefore better excavation performance, than the conventional pick cutters. In particular, the damage to and detachment (loss) of tungsten carbide inserts was minimal in the hardfaced pick cutters. A detailed inspection using scanning electron microscope-energy dispersive X-ray spectrometry and three-dimensional X-ray computed tomography scanning revealed no macro- or micro-cracks in the pick cutters. The reason for the absence of cracks may be that the heads of pick cutters are mechanically worn after the tungsten carbide inserts have been worn and damaged. However, scanning revealed the presence of voids between tungsten carbide inserts and pick cutter heads. This discovery of voids indicates the need to improve production processes in order to guarantee a higher quality of pick cutters.

• 한국산림과학회지
• /
• 제97권5호
• /
• pp.540-546
• /
• 2008

Enrichment planting has been used as one of the promising restoration techniques to accelerate the natural restoration process of secondary forests or logged-over forests in Myanmar, The objectives of this study were to examine the growth performances of two commercial species such as Teak (Tectona grandis Linn f.) and Padauk (Pterocarpus macrocarpus Kurz) in response to different canopy opening treatments and to examine the suitability of these species in enrichment planting activities for the restoration of degraded tropical forests in Myanmar. In this study, split plot design was applied, and three levels of canopy openings were experimented. The survival rate and height growth of two species were measured four times with 6 month interval. The root collar diameter (RCD) was also measured in the last assessment. Although the survival rate of seedlings was not significantly different among the three treatments (p>0.05) as well as between two species (p>0.05) for all consecutive measurements, height (p<0.05) and RCD were significantly different (p<0.001) among the treatments, T. grandis seedlings thrived best under complete canopy opening (i.e., 5 m width canopy opening with strip-clear cutting) while P. macrocarpus seedlings under partial canopy opening (without felling of marketable tree species). Because this study is concerned with only for young stage of seedlings, continuous assessment and follow-up tending activities are needed to verify the species suitability and optimum width of canopy opening for enrichment planting activities in restoration of degraded forests of Myanmar.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권6호
• /
• pp.102-112
• /
• 2012

최근 탄소섬유판 매립공법의 콘크리트 구조물의 보강에 적용되고 있다. 그러나 탄소섬유판 표면매립공법은 피복부 콘크리트의 강도 부족과 높이 부족 등으로 인하여 그 적용의 제한이 발생하기도 한다. 본 연구에서는 이와 같은 이유로 인하여 전단 스터럽을 절단하고 탄소섬유판을 주철근의 위치에 표면매립 보강하는 공법에 대하여 고찰하였다. 일반적인 표면매립공법과 스터럽을 절단하고 표면매립공법을 적용한 보에 대한 휨 실험을 수행하였으며, 결과를 서로 비교하였다. 탄소섬유판의 길이를 실험변수로 하였다. 실험결과에 따르면, 전단 스터럽을 절단한 보강 보의 휨거동은 일반적인 표면매립공법이 적용된 실험체의 거동과 유사한 전형적인 휨 거동을 나타내었으며, 스터럽의 절단으로 인한 구조거동상의 문제는 발생하지 않았다. 따라서, 일반적인 현장 여건에 의하여 탄소섬유판의 적용이 곤란한 경우에는 스터럽을 절단하는 본 공법의 적용이 가능한 것으로 판단된다.