• The Journal of the Petrological Society of Korea
• /
• v.26 no.4
• /
• pp.353-360
• /
• 2017

The preservation treatment for the outer rampart of Namhansanseong fortress is needed due to partial collapse and separation of stone materials. In this study, we investigated the petrological features of the stone materials used for the outer rampart and estimated their provenances through the geologic survey. Through the above study, the suitable replacement stone in the maintenance of outer rampart were suggested. The stone materials of the above outer rampart consist of the banded gneiss, augen gneiss, granitic gneiss and porphyroblastic gneiss. Among these four kinds of rocks, granitic gneiss is quantitatively the most abundant. Petrological comparisons between stone materials and rocks distributed around the fortress, lead to the conclusion that the above materials are likely to have been delivered from around the fortress. Judging from the results of the comparison on frequency of use and strength characteristics among the above rocks, the granitic gneiss is considered to be suitable for restoration of the outer rampart of the fortress.

• Archives of Plastic Surgery
• /
• v.45 no.1
• /
• pp.62-68
• /
• 2018

Background Amputation is commonly performed for toe necrosis secondary to peripheral vascular diseases, such as diabetes mellitus. When amputating a necrotic toe, preservation of the bony structure is important for preventing the collapse of adjacent digits into the amputated space. However, in the popular terminal Syme's amputation technique, partial amputation of the distal phalanx could cause increased tension on the wound margin. Herein, we introduce a new way to resect sufficient bony structure while maintaining the normal length, based on a morphological analysis of the toes. Methods Unlike the pulp of the finger in the distal phalanx, the toe has abundant teardrop-shaped pulp tissue. The ratio of the vertical length to the longitudinal length in the distal phalanx was compared between the toes and fingers. Amputation was performed at the proximal interphalangeal joint level. Then, a mobilizable pulp flap was rotated $90^{\circ}$ cephalad to replace the distal soft tissue defect. This modified toe fillet flap was performed in 5 patients. Results The toe pulp was found to have a vertically oriented morphology compared to that of the fingers, enabling length preservation through cephalad rotation. All defects were successfully covered without marginal ischemia. Conclusions While conventional toe fillet flap coverage focuses on the principle of length preservation as the first priority, our modified method takes both wound healing and length into account. The fattiest part of the pulp is advanced to the toe tip, providing a cushioning effect and enough length to substitute for phalangeal bone loss. Our modified method led to satisfactory functional and aesthetic outcomes.

• The Journal of the Petrological Society of Korea
• /
• v.1 no.2
• /
• pp.91-103
• /
• 1992

Eruptive mechanisms and processes at Udo tuff cone can be inferred from indicative characters of products, bedforms and lithofacies, and ring faults. In terms of bedforms and lithofa-cies in particular, massive lapilli tuff beds and chaotic lapilli tuff beds are derived from subaerial falls of aggregated tephra of wet tephra finger jets, occurring dominantly at the lower sequences of proximal part at the tuff cone. Crudely stratified lapilli tuff are derived from subaerial falls of slightly aggregated tephra of less wet tephra finger jets, whereas reversely graded lapilli tuff beds are from slightly disaggregated subaerial falls of continuous uprush. Both beds frequently occur in the middle sequences at proximal and near medial part of the tuff cone. Block and lapilli tephra lenses, ash-coated lapilli tephra beds(lenses) and thin-bedded tuff beds are derived from extremely disaggregated subaerial falls of dry tephra in the continuous uprush, frequently occurring at the upper sequences of medial part at the tuff cone. Udo tuff cone is a basaltic volcano emergent through the sea water surface while water could flood across or into the vent area. Emergence of the tuff cone was from the type-Surtseyan eruption characterized by earlier tephra finger jets and later continuous uprush columns of tephra with copious volumes of steam. Explosions began when boiling of wter produced a bubble column reducing the hydrostatic pres-sure, allowing exsolution of gases from the magma. This expansion of magma into a vesiculating froth fragmented the magma and permitted mixing of magma and water so that a more vigorous generation of steam could proceed. Tephra finger jetting explosions continued to build the crater rims, then remove water from the vent that their deposits flowed like slsurries until the continuous uprush explosion ensued. Continuous uprush explosions were associated with most rapid accumula-tion of tephra. The increasing volume rate led to partial removal of water from the vent area by the newly tephra ring so that more vigorous activity could be attended by a reducing water supply. This might restrain surplus of cold water entering the vent and thus enhance the vigour of the eruption by allowing optimal heat exchange. Eventually the crater became so deep and unsuported that piecemeal sliding, or massive subsidence on indipping ring faults, filled and closed the vent, and the cycle of explosions and collapse began anew.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.999-1008
• /
• 2023

Deformed fuel rods can cause a partial blockage of the flow area in a subchannel. Such flow blockage will influence the core coolant flow and further the core heat transfer during the reflooding phase and subsequent severe accidents. Nevertheless, most of the system analysis codes simulate the accident process based on the assumed flow blockage ratio, resulting in inconsistencies between simulated results and actual conditions. This paper aims to study the influence of flow blockage in severe accident scenario of the CAP1400 reactor. First, the flow blockage model of ISAA code is improved based on the FRTMB module. Then, the ISAA-FRTMB coupling system is adopted to model and calculate the QUENCH-LOCA-0 experiment. The correctness and validity of the flow blockage model are verified by comparing the peak cladding temperature. Finally, the DVI Line-SBLOCA accident is induced to analyze the influence of flow blockage on subsequent CAP1400 reactor core heat transfer and core degradation. From the results of the DVI Line-SBLOCA accident analysis, it can be concluded that the blockage ratio is in the range of 40%-60%, and the position of severe blockage is the same as that of cladding rupture. The blockage reduces the circulation area of the core coolant, which in turn impacts the heat exchange between the core and the coolant, leading to the early failure and collapse of some core assemblies and accelerating the core degradation process.

• International Area Studies Review
• /
• v.22 no.3
• /
• pp.3-27
• /
• 2018

This paper analyzes Cuba's market-oriented reforms to alleviate essential problems with socialist countries such as soft budget constraints and incentive problems. It also discuss about effectiveness of industrial policy as a development strategy. The soft budget constraints and incentive problems resulted in the collapse of Soviet bloc and COMECON in early 1990s. After the collapse, Cuban economy suffered a steep dive, and national income tumbling down rapidly. Cuban faced serious shortages of food, gasoline, and other basic necessities of life. To halt and partially reverse economic downturn and dire austerity in the 1990's, the Cuban government made some partial reforms to the inherited Soviet system of cental planningand faced severe shortage in food, energy, and daily necessities. In response to the economic crisis. Cuba introduced economic reforms and implemented industrial policy as a development strategy as long as Cuba maintained a strong socialist country. Cuban government established the economic free zone law and attempted to induce foreign direct investment by implementing export-led industrial policy. Fiedel Castro approved the Law No. 165 "Free Zones and Industrial Parks", in 1996. However, Cuba's ESZ strategy seems to have failed because of the U.S. sanctions, but also because of Cuba's own policies, which do not allow foreign investors to hire workers directly and impose a high implicit tax on wages. By limiting advanced techniques of personnel and organization management, indirect employment can result in lowering work efforts and productivity of workers, and aggravating production efficiency in the ESZs. Another reason to fail comes from the double wage structure due to the double monetary-exchange rate system. Most of the high non-wage costs result from the double exchange rate system. Due to Cuba's imbalanced industry and production structures, concentrated labor force, and urbanization and centralization of agriculture production, the industrial transformation development model suggested by Lewis has not been successful unlike other Asian agriculture-led development model. Cuba has to overcome many difficulties in implementing industrial policy as a development strategy.

• The korean journal of orthodontics
• /
• v.40 no.2
• /
• pp.66-76
• /
• 2010

Objective: Obstructive sleep apnea (OSA) is a common disorder which is characterized by a recurrence of entire or partial collapse of the pharyngeal airway during sleep. A given tidal volume must traverse the soft tissue tube structure of the upper airway, so the tendency for airway obstruction is influenced by the geometries of the duct and characteristics of the airflow in respect to fluid dynamics. Methods: Individualized 3D FEA models were reconstructed from pretreatment computerized tomogram images of three patients with obstructive sleep apnea. 3D computational fluid dynamics analysis was used to observe the effect of airway geometry on the flow velocity, negative pressure and pressure drop in the upper airway at an inspiration flow rate of 170, 200, and 230 ml/s per nostril. Results: In all 3 models, large airflow velocity and negative pressure were observed around the section of minimum area (SMA), the region which narrows around the velopharynx and oropharynx. The bigger the Out-A (outlet area)/ SMA-A (SMA area) ratio, the greater was the change in airflow velocity and negative pressure. Conclusions: Pressure drop meaning the difference between highest pressure at nostril and lowest pressure at SMA, is a good indicator for upper airway resistance which increased more as the airflow volume was increased.

• Journal of Korean Foot and Ankle Society
• /
• v.15 no.4
• /
• pp.201-206
• /
• 2011

Purpose: Subtalar distraction arthrodesis is useful treatment option for restore hindfoot alignment. but, using structural autograft have high risk of donor site morbidity. Recently, by replacing the structural allograft has been reported satisfactory clinical results. Therefore, the authors reviewed the results of subtalar distraction arthrodesis using a structural allograft, retrospectively. Materials and Methods: From January 2008 to May 2010, 12 patients (12 feets; 9 male, 3 female) underwent subtalar distraction arthrodesis using frozen structural allograft. 9 cases were calcaneal malunion, 2 were nonunion or malunion after subtalar arthrodesis, 1 was other cause. Mean age was 38.9 (12~66) years old and follow up period was 16.5 (12~36) months. Surgical was performed with posterolateral approach and tricortical allobone block of frozen femoral neck was used. Analysis was done with retorspective manner to evaluate preoperative, postoperative, and final follow up radiologic measurement and AOFAS ankle-hindfoot scale. Results: There was statistically significant increase (p<0.05) of ankle-hindfoot scale from preoperative 27.5 points to postoperative 72.5 points, talocalcaneal height by 6.62 mm, calcaneal pitch angle by 5.73 degrees, lateral talocalcaneal angle by 6.38 degrees and significant decrease (p<0.05) of tali-1st metatarsal angle by 5.23 degrees. 11 feet (91.7%) acquired bony union and it takes average 5.1 months. Final post-operative result revealed talocalcaneal height changed by 2.57 mm, calcaneal pitch anble, lateral talocalcaneal angle, talar-1st metatarsal angle were changed by 2.63 degrees, 1.62 degrees, 1.18 degrees, respectively (p<0.05). 3 cases of partial osteonecrosis of posterior facet of calcaneus were observed in operation field, 4 cases of complication were developed (1 case of nonunion, 1 collapse of allobone graft, 1 screw loosening, 1 superficial skin necrosis). Conclusion: Subtalar distraction arthrodesis using frozen structural allobone graft is useful alternative treatment method of arthrodesis with structural autobone graft.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.279-286
• /
• 2021

In this study, we investigated the behavior characteristics of the L-type flange bolt connection, which is used to connect upper and lower flanges having L-type ring sections, by bolts. This connection is mainly used in domestic wind turbine structures, wherein it is a vital component as any imperfection could cause the collapse of the entire structural system. Therefore, understanding the behavior characteristics of the L-type flange bolt connection is imperative. In this study, the connection's response to external force was simulated using finite element (FE) analysis and the FE model was idealized to behave as a single L-type bolt flange. The variation in the bolt tension and the L-type flange stress were analyzed to understand the behavior characteristics of the connection. Moreover, the bolt-load function models proposed by Petersen, Schmidt/Neuper and VDI 2230, theoretically expressing a relation between bolt tension and external force, were compared to evaluate the suitability of the FE analysis and analyze the significant behavior characteristics of the connection. Furthermore, the changes in the bolt-load curve due to the variations in the partial dimensions of the L-type flange bolt connection were analyzed.

• Sleep Medicine and Psychophysiology
• /
• v.24 no.2
• /
• pp.106-117
• /
• 2017

Objectives: Obstructive sleep apnea (OSA) is a sleep-related breathing disorder that is characterized by repetitive collapse or partial collapse of the upper airway during sleep in spite of ongoing effort to breathe. It is believed that OSA is usually worsened in REM sleep, because muscle tone is suppressed during REM sleep. However, many cases showed a higher apnea-hypopnea index (AHI) during NREM sleep than during REM sleep. We aimed here to determine the characteristics of REM sleep-dependent OSA (REM-OSA) and NREM sleep-dependent OSA (NREM-OSA). Methods: Five hundred sixty polysomnographically confirmed adult OSA subjects were studied retrospectively. All patients were classified into 3 groups based on the ratio between REM-AHI and NREM-AHI. REM-OSA was defined as REM-AHI/NREM-AHI > 2, NREM-OSA as NREM-AHI/REM-AHI > 2, and the rest as sleep stage-independent OSA (IND-OSA). In addition to polysomnography, questionnaires related to subjective sleep quality, daytime sleepiness, and emotion were completed. Chi-square test, ANOVA, and ANCOVA were performed. Results: There was no age difference among subgroups. The REM-OSA group was comprised of large proportions of mild OSA and female OSA patients. These patients experienced poor sleep and more negative emotions than other two groups. The AHI and oxygen desaturation index (ODI) were lowest in REM-OSA. Sleep efficiency and N3 percentage of REM-OSA were higher than in NREM-OSA. The percentage of patients who slept in a supine position was higher in REM-OSA than other subgroups. IND-OSA showed higher BMI and larger neck circumference and abdominal circumference than REM-OSA. The patients with IND-OSA experienced more sleepiness than the other groups. AHI and ODI were highest in IND-OSA. NREM-OSA presented the shortest total sleep time and the lowest sleep efficiency. NREM-OSA showed shorter sleep latency and REM latency and higher percentage of N1 than those of REM-OSA and the highest proportion of those who slept in a lateral position than other subgroups. NREM-OSA revealed the highest composite score on the Horne and ${\ddot{O}}stberg$ questionnaire. With increased AHI severity, the numbers of apnea and hypopnea events during REM sleep decreased, and the numbers of apnea and hypopnea events during NREM sleep increased. The results of ANCOVA after controlling age, sex, BMI, NC, AC, and AHI showed the lowest sleep efficiency, the highest AHI in the supine position, and the highest percentage of waking after sleep onset in NREM-OSA. Conclusion: REM-OSA was associated with the mild form of OSA, female sex, and negative emotions. IND-OSA was associated with the severe form of OSA. NREM-OSA was most closely related to position and showed the lowest sleep efficiency. Sleep stage-dependent characteristics could provide better understanding of OSA.

• Korean Journal of Weed Science
• /
• v.14 no.3
• /
• pp.199-211
• /
• 1994

Butachlor applied pre-emergence at 3.6kg ai/ha inhibited the growth and developments of shoot of barnyardgrass under dry condition, whereas rice was unaffected. Growth of rice and barnyardgrass under water condition was severely inhibited by treatment of butachlor but that of transplanted rice was not affected. The inhibition rate was higher under water condition, in broadcast rice and direct seeded rice than under dry condition, drilled rice and transplanted rice, respectively. The major anatomical response of stem of barnyardgrass seedling to butachlor under dry condition were partial reduction in thickness and collapse of leaf sheath, while not in rice. Broadcast rice on soil under water condition appeared reduction and constriction of leaf primordia thickness, and barnyardgrass formed tubular-like leaves and showed inhibited elongation of apical meristem. On the other hand, transplanted rice did not show these responses.