• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.58-61
• /
• 2003

ITO (indium tin oxide) thin films on PET (polyethylene terephthalate) substrate have been deposited by a dc reactive magnetron sputtering without heat treatments such as substrate heater and post heat treatment. Each sputtering parameter during the sputtering deposition is an important factor for the high quality of ITO thin films deposited on polymeric substrate. Particularly, the material, electrical and optical properties of as-deposited ITO oxide films are dominated by the ratio of oxygen partial pressure. As the experimental results, the excellent ITO films are prepared on PET substrate at the operating conditions as follows: operating pressure of 5 mTorr,target-substrate distance of 45 mm, dc power of 20-30 W, and oxygen gas ratio of 10 %. The optical transmittance is above 80 % at 550 nm, and the sheet resistance and resistivity of films are $24\;{\Omega}$/square and $1.5{\times}10^{-3}\;cm$, respectively.

• Archives of Pharmacal Research
• /
• v.20 no.3
• /
• pp.239-246
• /
• 1997

In the present study, liver regeneration rate (%) was increased up to 70% 3 days after partial hepatectomy (PH). Nitric oxide synthase (NOS) activity in liver tissue as well as serum nitrite/ nitrate content had no timed response, revealing no significant difference between shamoperated and partially hepatectomized rat liver. Contents of free methylarginines in liver tissue were increased biphasically in a time-dependent manner after PH. However, those in serum did not exhibit the same patterns as in liver. Taken together, the results suggest that $N^{G}$-monomethyl-L-arginine (MMA) and $ N^{G}, N^{G}$-dimethylarginine (DMA) play a role in inhibiting nitric oxide (NO) synthesis in regenerating rat liver because the increase of their contents was synchronized with NOS expression.

• Advances in concrete construction
• /
• v.10 no.3
• /
• pp.221-236
• /
• 2020

To reduce the CO₂ emissions associated with the manufacture of portland cement (PC), an efficient alternative like an alkali-activated binder (AAB) is the requirement of the industry. To promote the use of AAB in construction activities, a practically implementable mix proportion is required. Owing to the several raw ingredients of AAB concrete and their associated uncertainties, partial replacement of PC by AAB may be adopted instead of complete replacement as per industrial requirements. Hence, the present study aims to determine an optimal proportion for partial replacement of PC with AAB and recommend a technique for it based on site conditions. Three modes of partial replacement are followed: combining all the dry ingredients for AAB and PC followed by the addition of the requisite liquids (PAM); combining the PC and the AAB concrete in two horizontal layers (PAH); and two vertical layers (PAV). 28-day old specimens are exposed to 10% v/v solutions of HCl, H₂SO₄, and HNO₃ to evaluate changes in mechanical, physical, and microstructural characteristics through compressive strength, corrosion depth, and microscopy. Based on deterioration in strength and integrity, PAH or PAV can be adopted in absence of acid attack, whereas PAM is recommended in presence of acid attack.

• Journal of the Korean Society of Safety
• /
• v.34 no.4
• /
• pp.59-67
• /
• 2019

Since it is really hard to construct process models based on prior process knowledges, various statistical approaches have been employed to build fault diagnosis models. However, the crucial drawback of these approaches is that the solutions may vary according to the fault magnitude, even if the same fault occurs. In this study, the parameter monitoring approach is suggested. When a fault occurs in a chemical process, this leads to trigger the change of a process model and the monitoring parameters of process models is able to provide the efficient fault diagnosis model. A few important variables are selected and their predictive models are constructed by partial least square (PLS) method. The Euclidean norms of parameters of PLS models are estimated and a fault diagnosis can be performed as comparing with parameters of PLS models based on normal operational conditions. To improve the monitoring performance, cumulative summation (CUSUM) control chart is employed and the changes of model parameters are recorded to identify the type of an unknown fault. To verify the efficacy of the proposed model, Tennessee Eastman (TE) process is tested and this model can be easily applied to other complex processes.

• Structural Engineering and Mechanics
• /
• v.29 no.3
• /
• pp.311-325
• /
• 2008

Noting that damage occurrence of offshore jacket platforms is concentrated in two structural regions that are in the vicinity of still water surface and close to the seabed, a damage detection method by using only partial measurement of vibration in a suspect region was presented in this paper, which can not only locate damaged members but also evaluate damage severities. Then employing an experiment platform model under white-noise ground excitation by shaking table and using modal parameters of the first three modes identified by a scalar-type ARMA method on undamaged and damaged structures, the feasibility of the damage detection method was discussed. Modal parameters from eigenvalue analysis on the structural FEM model were also used to help the discussions. It is demonstrated that the damage detection algorithm is feasible on damage location and severity evaluation for broken slanted braces and it is robust against the errors of baseline FEM model to real structure when the principal errors is formed by difference of modal frequencies. It is also found that Z-value changes of modal shapes also play a role in the precise detection of damage.

• Asia-Pacific Journal of Business
• /
• v.10 no.2
• /
• pp.13-26
• /
• 2019

This paper aims to empirically examine the short-run and long-run aggregate demand for the US imports using quarterly economic data for the period 2000-2018 including aggregate imports, final expenditure components, gross fixed capital formation and relative price of imports. According to the results of both multivariate co-integration analysis and error correction model, the above variables are all cointegrated and significant differences are found to exist among the long-run partial elasticities of imports as regards different macro components of final expenditure. Partial elasticities with respect to government expenditure, gross fixed capital formation, exports and relative price of import are found to be positive while imports seems to respond negatively to changes in private consumption, implying that an increase in private consumption could result in a significant reduction in demand for imports in the long run. With regard to the relative import prices, the results appear to indicate a relatively insignificant influence on the aggregate imports in the US in the long run. However, an error correction model designed for predicting the short-term variability shows that only exports have an impact on the imports in the short run.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.303-307
• /
• 2023

In this paper, the creation of an Electron-Hole Pair due to Total Ionizing Dose (TID) effects inside the oxide of a Buried Channel Array Transistor (BCAT) device is induced, resulting in an increase in leakage current and threshold due to an increase in hole trap charge at the oxide interface. By comparing and simulating changes in voltage with the previously proposed Partial Isolation Buried Channel Array Transistor (Pi-BCAT) structure, the characteristics in leakage current and threshold voltage changed regardless of the increased oxide area of the Pi-BCAT device, compared to the asymmetrically doped BCAT structure. It shows superiority.

• Journal of Acupuncture Research
• /
• v.40 no.4
• /
• pp.382-388
• /
• 2023

The triangular fibrocartilage complex (TFCC) is crucial for stabilizing the ulnar side of the wrist but can be partially torn due to degenerative changes, falling, or sudden injuries. However, only a few studies have focused on the use of Korean medicine treatments for TFCC-related wrist pain. This case report presents the successful outcomes of integrated Korean medicine treatment in a patient with a partial TFCC tear. The diagnosis was confirmed via magnetic resonance imaging, which revealed the tear. Subsequently, the patient received integrated Korean medicine treatments. The assessment of the pain scale scores revealed a significant reduction in wrist pain and an improvement in daily life activities. Based on the findings of this study, integrated Korean medicine treatments have been proven to be an effective treatment option for patients with a partial TFCC tear. However, further research is needed to determine the potential benefits and mechanisms of these treatments in managing TFCC-related wrist pain.

• Journal of the Korean Magnetic Resonance Society
• /
• v.19 no.3
• /
• pp.119-123
• /
• 2015

The thermodynamic properties and structural geometry of $KMgCl_3{\cdot}6H_2O$ were investigated using thermogravimetric analysis, differential scanning calorimetry, and nuclear magnetic resonance. The initial mass loss occurs around 351 K ($=T_d$), which is interpreted as the onset of partial thermal decomposition. Phase transition temperatures were found at 435 K ($=T_{C1}$) and 481 K ($=T_{C2}$). The temperature dependences of the spin-lattice relaxation time $T_1$ for the $^1H$ nucleus changes abruptly near $T_{C1}$. These changes are associated with changes in the geometry of the arrangement of octahedral water molecules.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.630-636
• /
• 1994

The changes in adhesion interface between rubber compound and brass plated steel cord after various aging treatments were studied by using an Auger electron spectrometer and a scanning electron microscope. After thermal aging, partial oxidation and additional growth of adhesion layer were observed. The adhesion layer and brass were partially removed after humid aging. With dynamic aging the adhesion layer was destroyed and the corrosion of steel core was proceeded. The changes in adhesion interface were discussed in terms of the adhesion properties determined from the stress-strain experiments.