• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.125-133
• /
• 2011

This study was conducted on greenhouses whose side heights had been raised after the columns of 1-2W basic type greenhouses had been cut and welding with the same-sized pipes. When the wind load or snow load affects restructured pipe greenhouse like this, those parts will be structurally unsafe. To examine this, the bending strength of welded columns were measured through four stages and compared with the pipes in their original condition. Results are as follows. In the case of a bending test on welded joints about steel pipes used for greenhouses, satisfactory results couldn't be drawn because sections of both ends and the loading parts couldn't endure loads and sank regardless of loading methods. Partial problems could be solved by inserting inside pipe(steel bar) at the sections and the loading parts, but it was necessary to devise more satisfactory bending test methods. The strength of welded joints wasn't much different compared with original conditions and demonstrated only slight differences according to the sample production conditions. However, significant incompleteness in the welding process was expected to cause a decisive loss in strength. On the assumption that there were no problems in the welding process or with regard to the inclination of sub materials for columns after connection, it was deemed reasonable to assume that the strength of welded pipes was about 84~90% of the strength of the pipes in their original condition. Considering mid- and long-term strength decline following the onset of rust at joints or welding sections, structural changes in the main sub materials that are used for greenhouses at farmhouses have to be avoided to ensure structural safety, unless these changes are inevitable.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.1
• /
• pp.76-87
• /
• 2019

The purpose of this study was to evaluate the performance of and to derive future maintenance-management measures of the constructed alternative habitat for the Kaloula borealis at the University of Seoul, examining the period between 2015-2017. The research was constructed in 2014 and in a $191m^2$ area. The performance evaluation was divided into maintaining the habitat of the target species, maintaining the population and reproduction rates of the target species, maintaining the habitat of the wild species, the resilience of natural ecosystems, and the harmony with the surrounding environment. In terms of maintaining the habitat of the target species, soil collected from the existing habitat of the Kaloula borealis and was the depth was increased to 30cm in the alternative habitat. An artificial water supply was required every year during the supporting the spawning and hatching of other amphibians along with the Kaloula borealis. The sources of water of the alternative habitat were both rain and tap water, as it cannot be maintained naturally. Additionally, the Kaloula borealis thrived because it inhabited the research site and the average temperature was $26.2^{\circ}C$ from April-June, which is when the Kaloula borealis spawns. In terms of maintaining the population and reproduction rates of the Kaloula borealis, they were evaluated to have stable rates of reproduction. In terms of maintaining the habitat of the wild species, studies on vegetation and the structure of the characteristics of prey or predators will be needed. Also, alien species, such as Humulus japonicus and Bidens frondosa needed to be removed to maintain the wetland ecosystem of the wild species. In the assessment of the resilience of the natural ecosystems, the mud was monitored, noting the changes in the depth of water, with steps taken to reduce the leakage of water. The mud collected from the Haneul Pond wetland, which is located around the research site was piled up. Also, partial mowing management and the inducement of a natural vegetation colony was required for vegetation management. It was also necessary to create porous spaces, such as old trees and tree branches to create a habitat with hiding places and feeding and spawning places for small organisms. In terms of the harmony with the surrounding environment, the following threat factors needed to be managed: amphibian roadkill by vehicles and pedestrians and artificial draining due to nearby user access. Based on the monitoring results, alternative habitat management measures presented the promoting various waterside structures, in which amphibians can spawn and hide in, managing the water environment consistently, managing the vegetation, focused on the habitat of the wild species, and managing the surrounding environment for the habitat. The creation of an alternative habitat should be managed through monitoring, reflecting the characteristics of the changes in the site. Also continuing efforts are also needed to improve the habitat of the target species.

• Proceedings of the KOR-KST Conference
• /
• 1995.02a
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.

• Journal of Chest Surgery
• /
• v.37 no.3
• /
• pp.201-209
• /
• 2004

Extracorporeal life support (ECLS) system is a device for respiratory and/or heart failure treatment, and there have been many trials for development and clinical application in the world. Currently, a non-pulsatile blood pump is a standard for ECLS system. Although a pulsatile blood pump is advantageous in physiologic aspects, high pressure generated in the circuits and resultant blood cell trauma remain major concerns which make one reluctant to use a pulsatile blood pump in artificial lung circuits containing a membrane oxygenator. The study was designed to evaluate the hypothesis that placement of a pressure-relieving compliance chamber between a pulsatile pump and a membrane oxygenator might reduce the above mentioned side effects while providing physiologic pulsatile blood flow. The study was performed in a canine model of oleic acid induced acute lung injury (N=16). The animals were divided into three groups according to the type of pump used and the presence of the compliance chamber, In group 1, a non-pulsatile centrifugal pump was used as a control (n=6). In group 2 (n=4), a single-pulsatile pump was used. In group 3 (n=6), a single-pulsatile pump equipped with a compliance chamber was used. The experimental model was a partial bypass between the right atrium and the aorta at a pump flow of 1.8∼2 L/min for 2 hours. The observed parameters were focused on hemodynamic changes, intra-circuit pressure, laboratory studies for blood profile, and the effect on blood cell trauma. In hemodynamics, the pulsatile group II & III generated higher arterial pulse pressure (47$\pm$ 10 and 41 $\pm$ 9 mmHg) than the nonpulsatile group 1 (17 $\pm$ 7 mmHg, p<0.001). The intra-circuit pressure at membrane oxygenator were 222 $\pm$ 8 mmHg in group 1, 739 $\pm$ 35 mmHg in group 2, and 470 $\pm$ 17 mmHg in group 3 (p<0.001). At 2 hour bypass, arterial oxygen partial pressures were significantly higher in the pulsatile group 2 & 3 than in the non-pulsatile group 1 (77 $\pm$ 41 mmHg in group 1, 96 $\pm$ 48 mmHg in group 2, and 97 $\pm$ 25 mmHg in group 3: p<0.05). The levels of plasma free hemoglobin which was an indicator of blood cell trauma were lowest in group 1, highest in group 2, and significantly decreased in group 3 (55.7 $\pm$ 43.3, 162.8 $\pm$ 113.6, 82.5 $\pm$ 25.1 mg%, respectively; p<0.05). Other laboratory findings for blood profile were not different. The above results imply that the pulsatile blood pump is beneficial in oxygenation while deleterious in the aspects to high pressure generation in the circuits and blood cell trauma. However, when a pressure-relieving compliance chamber is applied between the pulsatile pump and a membrane oxygenator, it can significantly reduce the high circuit pressure and result in low blood cell trauma.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.2
• /
• pp.43-49
• /
• 2019

Purpose: This study examined changes in the position of the heat and lungs depending on the patient's breathing method during left breast cancer radiotherapy and used treatment plans to compare the resulting radiation dose. Materials and methods: The participants consisted of 10 patients with left breast cancer. A CT simulator(SIMENS SOMATOM AS, Germany) was used to obtain images when using three different breathing methods: free breathing(FB), deep inspiration breath hold(DIBH with Abches, DIBH), inspiration breath hold(IBH with CPAP, CPAP). A Ray Station(5.0.2.35, Sweden) was used for treatment planning, the treatment method was volumetric modulated arc therapy (VMAT) with one partial arc of the same angle, and the prescribed dose to the planning target volume (PTV) was a total dose of 50Gy(2Gy/day). In treatment plan analysis, the 95% dose (D95) to the PTV, the conformity index(CI), and the homogeneity index (HI) were compared. The lungs, heart, and left anterior descending artery (LAD) were selected as the organs at risk(OARs). Results: The mean volume of the ipsilateral lung for FB, DIBH, and CPAP was 1245.58±301.31㎤, 1790.09±362.43 ㎤, 1775.44±476.71 ㎤. The mean D95 for the PTV was 46.67±1.89Gy, 46.85±1.72Gy, 46.97±23.4Gy, and the mean CI and HI were 0.95±0.02, 0.96±0.02, 0.95±0.02 and 0.91±0.01, 0.90±0.01, 0.92±0.02. The V20 of Whole Lung was 10.74±4.50%, 8.29±3.14%, 9.12±3.29% and The V20 of the ipsilateral lung was 20.45±8.65%, 17.18±7.04%, 18.85±7.85%, the Dmean of the heart was 7.82±1.27Gy, 6.10±1.27Gy, 5.67±1.56Gy, and the Dmax of the LAD was 20.41±7.56Gy, 14.88±3.57Gy, 14.96±2.81Gy. The distance from the thoracic wall to the LAD was measured to be 11.33±4.70mm, 22.40±6.01mm, 20.14±6.23mm. Conclusion: During left breast cancer radiotherapy, the lung volume was 46.24% larger for DIBH than for FB, and 43.11% larger for CPAP than FB. The larger lung volume increases the distance between the thoracic wall and the heart. In this way, the LAD, which is one of the nearby OARs, can be more effectively protected while still satisfying the treatment plan. The lung volume was largest for DIBH, and the distance between the LAD and thoracic wall was also the greatest. However, when performing treatment with DIBH, the intra-fraction error cannot be ignored. Moreover, communication between the patient and the radiotherapist is also an important factor in DIBH treatment. When communication is problematic, or if the patient has difficulty holding their breath, we believe that CPAP could be used as an alternative to DIBH. In order to verify the clinical efficacy of CPAP, it will be necessary to perform long-term follow-up of a greater number of patients.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.127-135
• /
• 2014

Purpose : By taking advantage of each imaging modality, the use of fused CT/MRI image has increased in prostate cancer radiation therapy. However, fusion uncertainty may cause partial target miss or normal organ overdose. In order to complement such limitation, our hospital acquired MRI image (Planning MRI) by setting up patients with the same fixing tool and posture as CT simulation. This study aims to evaluate the usefulness of the Planning MRI through comparing and analyzing the diagnostic MRI image and Planning MRI image. Materials and Methods : This study targeted 10 patients who had been diagnosed with prostate cancer and prescribed nonhormone and definitive RT 70 Gy/28 fx from August 2011 to July 2013. Each patient had both CT and MRI simulations. The MRI images were acquired within one half hour after the CT simulation. The acquired CT/MRI images were fused primarily based on bony structure matching. This study measured the volume of prostate in the images of Planning MRI and diagnostic MRI. The diameters at the craniocaudal, anteroposterior and left-to-right directions from the center of prostate were measured in order to compare changes in the shape of prostate. Results : As a result of comparing the volume of prostate in the images of Planning MRI and diagnostic MRI, they were found to be $25.01cm^3$(range $15.84-34.75cm^3$) and $25.05cm^3$(range $15.28-35.88cm^3$) on average respectively. The diagnostic MRI had an increase of 0.12 % as compared with the Planning MRI. On the planning MRI, there was an increase in the volume by $7.46cm^3$(29 %) at the transition zone directions, and there was a decrease in the volume by $8.52cm^3$(34 %) in the peripheral zone direction. As a result of measuring the diameters at the craniocaudal, anteroposterior and left-to-right directions in the prostate, the Planning MRI was found to have on average 3.82cm, 2.38cm and 4.59cm respectively and the diagnostic MRI was found to have on average 3.37cm, 2.76cm and 4.51cm respectively. All three prostate diameters changed and the change was significant in the Planning MRI. On average, the anteroposterior prostate diameter decrease by 0.38cm(13 %). The mean right-to-left and craniocaudal diameter increased by 0.08cm(1.6 %) and 0.45cm(13 %), respectively. Conclusion : Based on the results of this study, it was found that the total volumes of prostate in the Planning MRI and the diagnostic MRI were not significantly different. However, there was a change in the shape and partial volume of prostate due to the insertion of prostate balloon tube to the rectum. Thus, if the Planning MRI images were used when conducting the fusion of CT/MRI images, it would be possible to include the target in the CTV without a loss as much as the increased volume in the transition zone. Also, it would be possible to reduce the radiation dose delivered to the rectum through separating more clearly the reduction of peripheral zone volume. Therefore, the author of this study believes that acquisition of Planning MRI image should be made to ensure target delineation and localization accuracy.

• Applied Biological Chemistry
• /
• v.21 no.2
• /
• pp.84-102
• /
• 1978

Barley embryoless half seeds were incubated in medium containing $10{\mu}M$ GA. Time course activity changes of ${\alpha}-amylase$ were studied in extract and medium seperately by the addition of $0.1{\mu}M,\;5{\mu}M,\;and\;10{\mu}M$ ABA in midcourse incubation of 10 hours after GA treatment. MAK profiles of nucleic acids in embryoless half seeds were compared either with $10{\mu}M$ GA treatment or concomitant treatment with $10{\mu}M$ GA and $10{\mu}M$ ABA after 10 hours incubation, Time course changes of weight increase, chlorophyll, protein and RNA consent in addition to RNase activity were studied in the presence of $10{\mu}M$ GA or $10{\mu}M$ ABA in barley coleoptile sections. After 20 hours incubation in the presence of plant hormones, MAK profiles of nucleic acids and reactive distribution of polysome and monosome were investigated. The above results were summarized as follows. 1) The production of ${\alpha}-amylase$ by treatment with GA alone increased at a linear rate in the incubation period and the active secretion of ${\alpha}-amylase$ began from 18 hours incubation in embryoless half seeds. 2) On the contrary to the partial inhibition by addition of $0.1{\mu}M$ ABA, the production of ${\alpha}-amylase$ was completely inhibited by both $5{\mu}M$ and $10{\mu}M$ ABA within 4 hours. Regardless of concentration of GA, the addition of $5{\mu}M$ ABA in midcourse completely inhibited the production of ${\alpha}-amylase$ 3) ABA treatment gave no effect on the secretion of ${\alpha}-amylase$. 4) There were no differences in RNA fractions between GA treatment and concomitant treatment with GA and ABA in the barlye embryoless half seeds. 5) While GA treatment increased the r-RNA fraction, ABA treatment decreased it and increased the s-RNA fraction in the coleoptile sections. 6) GA treatment increased RNA-DNA fraction best ABA treatment decreased it in the coleoptile sections. 7) While GA treatment suppressed RNase activity, ABA treatment increased it in the coleoptile sections. 8) GA treatment gave no great effect on the total RNA but ABA treatment remarkably diminished it in the coleoptile sections. 9) While GA treatment increased the growth and chlorophyll content, ABA treatment decreased them in the coleoptile sections. 10) GA treatment increased the protein synthesis and polysome formation but ABA treatment decreased them in the coleoptile sections. 11) The inhibition effect of ABA on polysome formation seemed to be resulted from the inhibition of r-RNA synthesis by ABA.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.1 no.1
• /
• pp.45-55
• /
• 1998

Purpose: To make objective standards of small intestinal mucosal changes in cow's milk-sensitive enteropathy (CMSE) we analyzed histological changes of endoscopic duodenal mucosa biopsy specimens from normal children and patients of CMSE. Methods: We review the medical records of patients who had been admitted and diagnosed as CMSE by means of gastrofiberscopic duodenal mucosal biopsy following cow's milk challenge and withdrawal. Thirteen babies with CMSE, ranging from 14 days to 56 days of age, were studied. Five non-CMSE patients were used as control, ranging from 22 days to 72 days of age. The morphometric parameters under study were villous height, crypt zone depth, ratio of villous height to crypt zone depth, total mucosal thickness and length of surface epithelium by using H & E stained specimens under the drawing apparatus attached microscope. In addition, the numbers of lymphocytes in the epithelium and eosinophil cells in the lamina propria and epithelium were measured. Results: In the duodenal mucosal biopsy specimens in CMSE we found partial and subtotal villous atrophy with an increased number of interepithelial lymphocytes. The mean villous height($135{\pm}59\;{\mu}m$), ratio of villous height to crypt zone depth ($0.46{\pm}0.28$), total mucosal thickness ($499{\pm}56\;{\mu}m$), length of surface epithelium of small intestinal mucosa ($889{\pm}231\;{\mu}m$) in CMSE was significantly decreased compared with the control (p<0.05). The mean crypt zone depth ($311{\pm}65\;{\mu}m$) was significantly greater than the control ($188{\pm}24\;{\mu}m$)(p<0.05). Infiltration of interepithelial lymphocytes ($34.1{\pm}10.5$) were significantly greater than the control ($13.6{\pm}3.6$)(p<0.05). The number of eosinophil cells in both lamina propria and epithelium was no significant differences between groups (p>0.05). The small intestinal mucosa in treated CMSE showed much improved enteropathy of villous height, crypt zone depth, interepithelial lymphocytes compared with the control as well as untreated CMSE. Conclusion: Quantitation of mucosal dimensions confirmed the presence of CMSE. It seems to be a limitation in the capacity of crypt cells to compensate for the loss of villous epithelium in CMSE. Specimens obtained by gastrofiberscopic duodenal mucosal biopsy were suitable for morphometric diagnosis of CMSE. Improvement of CMSE also can be confirmed histologically after the therapy of protein hydrolysate.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.1
• /
• pp.93-106
• /
• 2014

In this study, Analyze environment of location, investigation into vegetation resources, survey management status and establish to classify the management area for Natural monument No.374 Pyengdae-ri Torreya nucifera forest. The results were as follows: First, Torreya nucifera forest is concerned about influence of development caused by utilization of land changes to agricultural region. Thus, establish to preservation management plan for preservation of prototypical and should be excluded development activity to cause the change of terrain that Gotjawal in the Torreya nucifera forest is factor of base for generating species diversity. Secondly, Torreya nucifera forest summarized as 402 taxa composed 91 familly 263 genus, 353 species, 41 varieties and 8 forms. The distribution of plants for the first grade & second grade appear of endangered plant to Ministry of Environment specify. But, critically endangered in forest by changes in habitat, diseases and illegal overcatching. Therefore, when establishing forest management plan should be considered for put priority on protection. Thirdly, Torreya nucifera representing the upper layer of the vegetation structure. But, old tree oriented management and conservation strategy result in poor age structure. Furthermore, desiccation of forest on artificial management and decline in Torreya nucifera habitat on ecological succession can indicate a problem in forest. Therefore, establish plan such as regulation of population density and sapling tree proliferation for sustainable characteristics of the Torreya nucifera forest. Fourth, Appear to damaged of trails caused by use. Especially, Scoria way occurs a lot of damaged and higher than the share ratio of each section. Therefore, share ratio reduction Plan should be considered through the additional development of tourism routes rather than the replacement of Scoria. Fifth, Representing high preference of the Torreya nucifera forest tourist factor confirmed the plant elements. It is sensitive to usage pressure. And requires continuous monitoring by characteristic of Non-permanent. In addition, need an additional plan such as additional development of tourism elements and active utilizing an element of high preference. Sixth, Strength of protected should be differently accordance with importance. First grade area have to maintenance of plant population and natural habitats. Set the direction of the management. Second grade areas focus on annual regeneration of the forest. Third grade area should be utilized demonstration forest or set to the area for proliferate sapling. Fourth grade areas require the introduced of partial rest system that disturbance are often found in proper vegetation. Fifth grade area appropriate to the service area for promoting tourism by utilizing natural resources in Torreya nucifera forest. Furthermore, installation of a buffer zone in relatively low ratings area and periodic monitoring to the improvement of edge effect that adjacent areas of different class.

• Korea journal of population studies
• /
• v.19 no.2
• /
• pp.77-105
• /
• 1996

The rural problems which we are facing start from the extremely small sized population and the skewed population structure by age and sex. Thus we analyzed the change of the rural population. And we analyzed the recent return migration to the rural areas by comparing the recent in-migrants with out-migrants to rural areas. And by analyzing the rural village survey data which was to show the current characteristics of rural population, we found out the effects of the in-migrants to the rural areas and predicted the futures of rural villages by characteristics. The changes of rural population composition by age was very clear. As the out-migrants towards cities carried on, the population composition of young children aged 0~4 years was low and the aged became thick. The proportion of the population aged 0~4 years was 45.1% of the total population in 1970 and dropped down to 20.4% in 1995, which is predicted to become under 20% from now on. In the same period(1970~1995), the population aged 65 years and over rose from 4.2% to 11.9%. In 1960, before industrialization, the proportion of the population aged 0~4 years in rural areas was higher than that of cities. As the rural young population continuously moves to cities it became lower than that in urban areas from 1975 and the gap grew till 1990. But the proportion of rural population aged 0~4 years in 1995 became 6.2% and the gap reduced. We can say this is the change of the characteristics of in-migrants and out-migrants in the rural areas. Also considering the composition of the population by age group moving from urban to rural area in the late 1980s, 51.8% of the total migrants concentrates upon age group of 20~34 years and these people's educational level was higher than that of out-migrants to urban areas. This fact predicted the changes of the rural population, and the results will turn out as a change in the rural society. However, after comparing the population structure between the pure rural village of Boeun-gun and suburban village of Paju-gun which was agriculture centered village but recently changed rapidly, the recent change of the rural population structure which the in-migrants to rural areas becomes younger is just a phenomenon in the suburban rural areas, not the change of the total rural areas in general. From the characteristics of the population structure of rural village from the field survey on these villages, we can see that in the pure rural villages without any effects from cities the regidents are highly aged, while industrialization and urbanization are making a progress in suburban villages. Therefore, the recent partial change of the rural population structure and the change of characteristics of the in-migrants toward rural areas is effecting and being effected by the population change of areas like suburban rural villages. Although there are return migrants to rural areas to change their jobs into agriculture, this is too minor to appear as a statistic effect.