• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.104-113
• /
• 2013

A high-throughput Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) decoder architecture is proposed for 60GHz multi-gigabit wireless personal area network (WPAN) applications. Two novel techniques which can apply to our selected QC-LDPC code are proposed, including a four block-parallel layered decoding technique and fixed wire network. Two-stage pipelining and four block-parallel layered decoding techniques are used to improve the clock speed and decoding throughput. Also, the fixed wire network is proposed to simplify the switch network. A 672-bit, rate-1/2 QC-LDPC decoder architecture has been designed and implemented using 90-nm CMOS standard cell technology. Synthesis results show that the proposed QC-LDPC decoder requires a 794K gate and can operate at 290 MHz to achieve a data throughput of 3.9 Gbps with a maximum of 12 iterations, which meet the requirement of 60 GHz WPAN applications.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.63-70
• /
• 2016

To increase throughput efficiency and improve performance, FTN(Faster Than Nyquist) method and LDPC(Low Density Parity Code) codes are employed in DVB-S3 system. In this paper, we proposed efficient turbo equalization model to minimize inter symbol interference induced by FTN transmission. This paper introduces two conventional scheme employing SIC(Successive Interference Cancellation) and BCJR equalizer. Then, we proposed new scheme to resolve problems in this two conventional scheme. To make performance improved in turbo equalization model, the outputs of LDPC and BCJR equalizer are iteratively exchange probabilistic information. In fed LDPC outputs as extrinsic informa tion of BCJR equalizer. we split LDPC output to separate bit probabilities. We compare performance of proposed scheme to that of conventional methods through using simulation in AWGN(Additive White Gaussian Noise) channel. We confirmed that performance was improved compared to conventional methods as increasing throughput parameters of FTN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.9
• /
• pp.817-825
• /
• 2013

The UHDTV system, which provides realistic service with ultra-high definite video and multi-channel audio, has been studied as a next generation broadcasting service. Since the conventional digital terrestrial transmission system is not capable to cover the increased transmission data rate of the UHDTV service, there are great necessity of researches about increase of data rate. Accordingly, the researches has been studied to increase the transmission data rate of the DVB-T2 system using dual-polarized MIMO technique and high order modulation. In order to optimize the MIMO DVB-T2 system where irregular LDPC codes are used, it is necessary to study the design of the bit mapper that matches the LDPC code and QAM symbols in MIMO channel. However, the research related to the design of the bit mapper has been limited to the SISO system. Therefore, this paper defines a new parameter that indicates the VND distribution of MIMO DVB-T2 system and performs the performance analysis according to the parameter which will be helpful for designing a MIMO bit mapper.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.486-492
• /
• 2004

In this paper, we newly propose the binary CA-CDMA(constant amplitude CDMA) system using pre-coding method to solve the high PAPR problem caused by multi-user signal transmission in the CDMA system. 4-user CA-CDMA, the basis of proposed binary CA-CDMA system, makes binary output signal for 4 input users. It produces the output of binary(${\pm}$2) amplitude by using a parity signal resulting from the XOR operation of 4 users data. Another sub-channel or more bandwidth is not necessary because it is transmitted together with user data and can be easily recovered in the receiver. The extension of the number of users can be possible by the simple repetition of the basic binary 4-user CA-CDMA. For example, binary 16-user CA-CDMA is made easily by allocating the four 4-user CA-CDMA systems in parallel and leading the four outputs to the fifth 4-user CA-CDMA system as input, because the output signal of each 4-user CA-CDMA is also binary. By the same extension procedure, binary 64 and 256-user CA-CDMA systems can be made with the constant amplitude. As a result, the code rate of this proposed CA-CDMA system is just 1 and binary CA-CDMA does not change the transmission rate with the constant output signal(PAPR = 0 ㏈). Therefore, the power efficiency of the HPA can be maximized without the nonlinear distortion. From the simulation results, it is verified that the conventional CDMA system has multi-level output signal, but the proposed binary CA-CDMA system always produces binary output. And it is also found that the BER of conventional CDMA system is increased by nonlinear HPA, but the BER of proposed binary CA-CDMA system is not changed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.63-69
• /
• 2017

In next generation satellite broadcasting system, requirement of high throughput efficiency has been increasing continuously. To increase throughput efficiency and improve bit error performance simultaneously, FTN method and LDPC codes are employed in new sattelite standard, DVB-S3 system. This paper considered three kinds of methods for increase throughput efficiency. Firstly, as conventional one, high coding rate parity matrix in LDPC encoder is considered. Secondly, punctured coding scheme which delete the coded symbols according to appropriate rules is considered. Lastly, FTN method which transmit fater than Nyquist rate is considered. Among of three kinds of methods, FTN method is most efficient in aspect to performance while maintain same throughput efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.504-511
• /
• 2016

In this paper, MIMO system based on turbo equalization techniques which LDPC codes were outer code and space time trellis codes (STTC) were employed as an inner code are studied. LDPC decoder and STTC decoder are connected through the interleaving and de-interleaving that updates each other's information repeatedly. In conventional turbo equalization of MIMO system, BCJR decoder which decodes STTC coded bits required two-bit wise decoding processing. Therefore duo-binary turbo codes are optimal for MIMO system combined with STTC codes. However a LDPC decoder requires bit unit processing, because LDPC codes can't be applied to these system. Therefore this paper proposed turbo equalization for MIMO system based on LDPC codes combined with STTC codes. By the simulation results, we confirmed performance of proposed turbo equalization model was improved about 0.6dB than that of conventional LDPC codes.

• ETRI Journal
• /
• v.30 no.6
• /
• pp.807-817
• /
• 2008

We present a low-density parity-check (LDPC)-based, threaded layered space-time-frequency system with emphasis on the iterative receiver design. First, the unbiased minimum mean-squared-error iterative-tree-search (U-MMSE-ITS) detector, which is known to be one of the most efficient multi-input multi-output (MIMO) detectors available, is improved by augmentation of the partial-length paths and by the addition of one-bit complement sequences. Compared with the U-MMSE-ITS detector, the improved detector provides better detection performance with lower complexity. Furthermore, the improved detector is robust to arbitrary MIMO channels and to any antenna configurations. Second, based on the structure of the iterative receiver, we present a low-complexity belief-propagation (BP) decoding algorithm for LDPC-codes. This BP decoder not only has low computing complexity but also converges very fast (5 iterations is sufficient). With the efficient receiver employing the improved detector and the low-complexity BP decoder, the proposed system is a promising solution to high-data-rate transmission over selective-fading channels.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.19-23
• /
• 2010

In this paper, we propose a combining scheme for partial IR based hybrid ARQ in MIMO systems. The proposed combining scheme is a symbol-level combining scheme for repeatedly transmitted systematic symbols in partial IR based hybrid ARQ. In this paper, it is shown that the proposed combining scheme can also enhance the detection performance of the parity symbols that are newly transmitted in each retransmission. Simulation results show that the proposed combining scheme significantly improves the performance of the partial IR based hybrid ARQ compared to the cases of the conventional bit-level combining scheme, especially with the ZF detection.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.5
• /
• pp.23-33
• /
• 2008

In this paper, we verify the performance of LDPC coded OFDM/DS system by Monte-Carlo simulation of BER on Eb/No. The simulation results show that LDPC coded OFDM/DS has a strong anti-jamming characteristic over pulse-noise jammer and partial-band noise jammer. The performance of LDPC coded OFDM/DS system is evaluated on both faded waveforms and non-faded waveforms. For non-faded waveforms, high coding gain is attained due to LDPC, even when waveforms have short PN sequence and JSR is only 5dB. Especially, the increase in the repeated number of LDPC decoding enhances coding gain. However, faded waveforms cannot achieve sufficient average effect when PN sequence is short. High coding gain of faded waveforms can be achieved by extending length of PN sequence. In addition, we compare LDPC coded OFDM/DS system with Convolutional coded OFDM/DS system. The simulation results illustrate that when LDPC coded OFDM/DS system with short PN sequence has sufficient average effects, the system shows lower BER than Convolutional coded OFDM/DS system with long PN sequence.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.4
• /
• pp.195-200
• /
• 2009

As 4G mobile communication systems require high transmission rates with reliability, the need for efficient error correcting code is increasing. In this paper, a novel LDPC (Low Density Parity Check) decoder is introduced. The LDPC code is one of the most popular error correcting codes. In order to improve performance of the LDPC decoder, we use SNR (Signal-to-Noise Ratio) estimation results to adjust coefficients of modified UMP-BP (Uniformly Most Probable Belief Propagation) algorithm which is one of widely-used LDPC decoding algorithms. An advantage of Modified UMP-BP is that it is amenable to implement in hardware. We generate the optimal values by simulation for various SNRs and coefficients, and the values are stored in a look-up table. The proposed decoder decides coefficients of the modified UMP-BP based on SNR information. The simulation results show that the BER (Bit Error Rate) performance of the proposed LDPC decoder is better than an LDPC decoder using a conventional modified UMP-BP.