• 한국농공학회논문집
• /
• 제56권1호
• /
• pp.21-30
• /
• 2014

The objective of this study is to find the electrical properties of Bottom ash from thermoelectric power plants in Korea. By using Parallel Plate Method, the electrical resistivity and dielectric constant were measured at the frequency from 20 Hz to 10 MHz. Also, unconfined strength test, XRF and sieve analysis were performed for finding the relationship between strength, physiochemical properties and electrical properties. In the result, the change of electrical resistivity and dielectric constant of bottom ash against frequency was similar to that of general soil. The proportion of fine grain in bottom ash had the positive correlation with dielectric constant and negative correlation with electrical resistivity. Chloride and sulfur trioxide were proportional to dielectric constant and the more bottom ash had chloride content, the lower electrical resistivity appeared in bottom ash. Unconfined strength of bottom ashes had a range from 200 kPa to 780 kPa and strength was inverse proportional to electrical resistivity.

• Journal of the korean society of oceanography
• /
• 제34권4호
• /
• pp.207-213
• /
• 1999

Sediment physical properties (compressional wave velocity, grain density, dry bulk density, and wet bulk density) are correlated to the paleoenvironmental parameters (coarse fraction, oxygen isotope, and planktonic foraminifera fragmentation) to reveal the possible interrelationship in the latest Quaternary sediments of the Ulleung Basin, the East Sea of Korea. Laboratory determinations of physical properties and paleoenvironmental parameters have been conducted on four piston core sediments. There are slight differences in the physical properties between glacial and interglacial period sediment sections. This is due to the large fraction of coarse grains of volcanic and terrigenous sediments relative to carbonate sediments. However, dry bulk density as an indicator of carbonate abundance in pelagic environment shows higher values at the lower part of cores, reflecting deeper CCD in the glacial period. Changes in velocity also relatively parallel to those in sediment coarse fraction, number of planktonic foraminifera, and wet bulk density. Therefore, we suggest that high-resolution physical properties may be used as a valuable tool for paleoenvironmental interpretation in the Ulleung Basin.

• 한국가구학회지
• /
• 제20권5호
• /
• pp.457-466
• /
• 2009

This study was carried out to investigate the physical and mechanical properties of 6 hardwoods before and after heat treatment in an effort to produce the high quality industrial lumber product. The results were as follows. Specific gravities of green woods were in range from 0.90 to 1.10. The specific gravities of never treated woods showed higher than those of the heat treated woods. The shrinkage of heat treated woods when green to air & oven dry was significantly low, compared to never treated woods. The compression strengths parallel to grain of heat treated woods showed higher than those of never treated woods. The moduli of rupture (MOR) of never treated and heat treated woods were $176.4N/mm^2{\sim}102.8N/mm^2$ and $100.1N/mm^2{\sim}61.2N/mm^2$ respectively. MORs of heat treated woods showed lower than those of never treated woods. There was no significant change in the modulus of elasticity (MOE) before and after heat treatment.

• Journal of the Korean Wood Science and Technology
• /
• 제18권3호
• /
• pp.26-33
• /
• 1990

To study the wood quality factors of Populus nigra $\times$ maxmowiczii known a rapidly growing species, the variations of green moisture contents, bulk density, wood fibre dimensions, microfibril angles, and number of leaf knot in stem wood were investigated. The heartwood contained a higher moisture content than the corresponding sapwood. Bulk density in radial patterns variations decrease outward from the pith, then increase toward the bark. The wood-fiber length and diameters had somewhat smaller values than on Populus alba $\times$ glandulosa or Populus euramericana. The microfibril angles decreased rapidly toward the outside, and their mean values were about 16 degree. The grain angles run nearly parallel to the cell axies. Number of leaf knot showed a fluctural change above ground level to a point near the base of the crown and then increased rapidly to the top of tree and average number of leaf knot varied exclusively from tree to tree.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.799-806
• /
• 2004

Recently, as the forerunner in establishing the Northeast Asia's logistics base, a lot of marine engineering works such as new ports and container terminals, extension of old ports, new bridges, land reclamation etc. have been progressed. Parallel to it, there is also an increasing demand for improving the safety of construction. In this situation, high resolution seismic reflection profiling can be well used, attempting to classify rocks and sediments under water, if possible, to delineate the distribution of grain sizes in sediments not only for calculating the cost of removing sediments from harbour's channels, but also for estimating the bearing capacities for bridge or port construction. However, the results from the corresponding reflection survey that has been in operation in our country can not be effectively used for engineering purposes mostly due to the insufficient resolution. Thus. in this paper, two innovative strategies are introduced to enhance resolution. The one deals with a newly designed exploration barge that will help reduce several kinds of noises encountered electrically or operationally. The other is associated with an establishment of optimum measuring system comprising e.g. a specially devised hydrophone with a combination of 7 piezoelectric elements. Field experiments performed at Busan harbour are illustrated. The quality of acquired data was thereby fundamentally improved in comparison with that obtained at the same time in a conventional way.

• Journal of the Korean Wood Science and Technology
• /
• 제40권6호
• /
• pp.363-369
• /
• 2012

연륜경사에 따른 전단강도 실험이 국내에서 생산되는 목재에 대해 실시됐다. 연륜경사는 전단강도에 영향했고, 경사진 연륜에서 최대였다. 전단강도는 나사못 유지력을 예측하기 위한 식에 포함됐다. 나사못 유지력의 예측식은 No. 8 나사못의 실험결과와 비교하여 25 mm와 30 mm 길이에서 8% 이내로 작게 예측되었으나 18 mm와 38 mm에서는 큰 값을 보였다. 전단강도를 사용한 나사못 유지력의 예측값과 실험값 사이에는 연륜경사에 따라 큰 차이를 보이지 않았다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.95-98
• /
• 1999

The crystalline alignment of Ni substrates textured by RABiTS have a probability distribution in the surface plane. This makes it difficult to obtain a high quality of textures over all the range of a long Ni tape. In order to improve the textures of Ni tape, we have investigated a new method of texturing. We obtained non-cube textured Ni tapes by rolling and annealing a high purity Ni. In these tapes, the [001]-axes were tilted around the rolling direction, and the [100]-axes were parallel to the rolling direction. The average grain size was several cm$^2$. We deposited buffer layer (CeO$^2$/YSZ/CeO$^2$) and YBCO on those tapes. We found out that a YBCO film with grows normal with respect to the surface and this feature is independent of the tilting angles of the Ni [001]-axes.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.54-60
• /
• 2001

This study is to investigate the mechanical properties and the fatigue crack propagation of fire resistance steel for frame structure as the chemical composition was changed by addition of N, B and rolled end temperature was varied. We used two kinds of specimen, the one is parallel and the other is perpendicular to the rolling directions. As rolled end temperature increased, volume fraction of ferrite and pearlite decreased, but volume fraction of baintie and grain size increased. Micro-hardness decreased as rolled end temperature increased, but tensile and yield strength increased. Volume fraction of ferrite and pearlite decreased by addition of N. But volume fraction of bainite, tensile and yield strength increased. Microstructure was changed to martensite by addition of B, and tensile and yield strength increased. Fatigue life of TL direction specimen was shorter than that of LT direction specimen. There was no significant effect to fatigue crack propagation rate by addition of N and changing rolling condition, but fatigue life was increased by addition of B.

• 터널과지하공간
• /
• 제20권3호
• /
• pp.217-224
• /
• 2010

비교적 균질한 3가지 화강암이 암석의 미세구조적 특성과 파괴인성 사이의 관계를 조사하기 위하여 연구되었다. 광학 현미경 관찰로 분석된 광물입자의 장축과 미세균열의 방위에 의하여 파괴인성 및 초음파 속도의 변화를 보였다. 가장 작은 값을 나타내는 파괴인성은 인장응력 방향과 수직하게 발달된 광물입자의 장축 및 미세균열의 방향이 주결에 일치할 때로서 파괴가 연약면인 광물입자의 장축이나 미세균열의 우세방향에 평행하게 전달될 때이다. SR 시편으로 측정된 파괴인성값은 1.63~2.62 MPa $m^{0.5}$의 변화를 보이며, 그 값들은 광물입자의 평균크기 및 미세균열의 평균길이와 관련된다.

• 한국가구학회지
• /
• 제10권2호
• /
• pp.55-61
• /
• 1999

This research was carried out to investigate the fundamental properties such as the structure of annual ring, density distribution, compressive strength with parallel to grain, relative crystallinity, and microfibril angle of Gumgangsong(Pinus densoflora for. erecta Uyeki). The wood specimens, Gumgangsong and Sonamu(Pinus densiflora S. et Z.), for this experiment were prepared at Ulijingoon Sokwangri and Kyungpook university's forest in Kyungpook province, respectively. Average annual ring width is $2.0mm{\pm}0.3$ in heartwood of Gumgangsong. The respectively of heart wood was over 60 percent in Gumgangsong and 20~50 percent in Sonamu. Heartwood density were ranged from 0.5 to $0.8{\;}g/cm^3$ in Gumgangsong and from 0.4 to $0.5{\;}g/cm^3$ in sonamu. Compressive strength in Gumgangsong and Sonamu was about $30{\pm}5MPa$ and $25{\pm}5MPa$, resepectively. But the relative crystallinity and microfibril angle of two species were not different clearly. From these results of Gumgangsong and Sonamu, therefore, it was considered the main difference factors for both species were annual ring width and heartwood percentage.