• 제목/요약/키워드: parallel system

검색결과 4,293건 처리시간 0.027초

고정상 담체를 충전한 활성슬러지 공정에서 DO농도와 HRT 및 담체 충전율 변화가 질소 제거효율에 미치는 영향 (The Effects of DO, HRT, and Media Packing Ratio on Nitrogen Removal Efficiency in BCM-ASR System)

  • 황규대;한봉석
    • 한국물환경학회지
    • /
    • 제24권6호
    • /
    • pp.659-669
    • /
    • 2008
  • Two sets of four parallel activated sludge reactors (ASRs) maintaining an MLSS of 3000 mg/L were operated to investigate the effect of DO, HRTs and bio-contact media (BCM) packing ratios on the removal efficiency of organic matters and nitrogen. Packing ratios of BCM to BCM-ASR systems 1, 2, 3, and 4 were 0% (suspended growth only), 10%, 15% and 20%, respectively. All systems were operated at an HRT of 4 hr, 6 hr, and 8 hr, respectively; DO concentration was maintained 0.5~1.0 mg/L and 1.5~2.0 mg/L for each HRT condition. In terms of TSS, TCODcr and SCODcr removal efficiency, all systems had a similar level of the removal efficiency under varied HRTs, and DO. But organic removal efficiency of systems with BCM was approximately 3~5% higher than systems without BCM at the same HRT and the DO. About the nitrification efficiency, with high DO (1.5~2.0 mg/L), as HRT (4 hr, 6 hr, 8 hr) or BCM packing ratio increased, the slight increment of nitrification efficiency was observed. However, under the low DO (0.5~1.0 mg/L), increase of BCM packing ratio and HRT resulted in large increase of the nitrification efficiency. At the same HRT and BCM packing ratio, the nitrification efficiency increased greatly with up to 15% as DO increased. When the HRT increased from 4hr to 8hr, the denitrification efficiency slightly increased by 5~10% only, under all DO conditions. Systems with BCM had higher denitrification efficiency, ranged 62.7~91.1% than systems without BCM showed 32.1~65.6%. And the increase in BCM packing ratio from 10% to 20% resulted in about 14~16% denitrification efficiency increment. BCM packing ratio showed great effect on the denitrification. The increase of the DO (from 0.5~1.0 mg/L to 1.5~2.0 mg/L) at the same HRT and BCM packing ratio resulted in slight decrease of denitrification efficiency with up to 7% for systems with BCM. But for systems without BCM, the denitrification efficiency decreased with up to 28%. In all system, the denitrification efficiency had more influence on the TN removal efficiency than nitrification efficiency. So, BCM packing ratio (0%, 10%, 15%, 20%) has greater effect on the TN removal than HRT and DO. The TN removal efficiency increased as packing ratio of BCM increased with up to 45%. As a result, the highest TN removal efficiency was observed 73.7% at the condition showed the highest denitrification efficiency that DO of 0.5~1.0 mg/L, an HRT of 8 hr, and 20% of BCM packing ratio was maintained.

우리 나라의 환경정책 방향 (Environmental Health Strategies in Korea)

  • 조병극
    • 환경위생공학
    • /
    • 제7권2호
    • /
    • pp.1-10
    • /
    • 1992
  • Since 1960's along with industrialization and urbanization, economic growth has been . achieved, however, at the same time, environmental condition has been seriously deteriorated. . Currently, volume of wastewater has been increasing at annual rate of 7% in sewage and 20% in industrial wastewater. However, the nation's sewage treatment serves only 33% of the municipal wastewater as of 1991. Major portion of air pollutants comes from combustion of oil and coal which comprise 81% of total energy use and emission gases from motor vehicles increasing at an accelerated rate. It is known that Korea generates the highest amount of waste per capta. Nevertheless, it is not sufficient to reduce the volume of waste by means of resources recovery and recycling. Recognizing the importance of global environmental problems such as ozone layer depletion, global warming and acid rain, international society has been making various efforts since the 1972 Stockholm conference. In particular, it is expected that the Rio conference which has adopted the Rio declaration and Agenda 21 will form a crucial turning point of the emerging new world order after the Cold War confrontation. To cope with such issues as domestic pollution and global environmental problems, the fundamental national policy aims at harmonizing "environmental protection and sustainable development". The Ministry of Environment has recently set up a mid-term comprehensive plan which includes annual targets for environmental protection. According to the government plan, gradual improvement of various environmental conditions and specific measures to achieve them is planned in time frame. Additional sewage treatment plants will be constructed in urban areas with the target to treat 65% of the nation's municipal sewage by 1996. Supply of clean fuels such as LNG will also be expanded starting from large cities as a cleaner substitute energy for coal and oil. In parallel with expansion of LNG, emphasis will be placed on installation of stack monitoring system. Due to the relatively limited land, government's basic policy for solid waste treatment is to develop large scale landfill facilities rather than small sized ones. Thirty three regional areas have been designated for the purpose of waste management. For each of these regions, big scale landfill site is going to be developed. To increase the rate of waste recycling the government is planning to reinforce separate collection system and to provide industries with economic incentives. As a part of meeting the changing situation on global environmental problems after UNCED, and accommodation regulatory measures stipulated in the global environmental conventions and protocols, national policy will try to alter industrial and economic structure so as to mitigate the increasing trends of energy consumption, by encouraging energy conservation and efficiency. In this regard, more attention will be given to the policy on the development of the cleaner technology. Ultimately, these policies and programs will contribute greatly to improving the current state of national public health.

  • PDF

다중 해시 조인의 파이프라인 처리에서 분할 조율을 통한 부하 균형 유지 방법 (A Load Balancing Method using Partition Tuning for Pipelined Multi-way Hash Join)

  • 문진규;진성일;조성현
    • 한국정보과학회논문지:데이타베이스
    • /
    • 제29권3호
    • /
    • pp.180-192
    • /
    • 2002
  • Shared nothing 다중 프로세서 환경에서 조인 어트리뷰트의 자료 불균형(data skew)이 파이프라인 해시 조인 연산의 성능에 주는 영향을 연구하고, 자료 불균형을 대비하여 적재부하를 Round-robin 방식으로 정적 분할하는 방법과 자료분포도를 이용하여 동적 분할하는 두 가지 파이프라인 해시 조인 알고리즘을 제안한다. 해시 기반 조인을 사용하면 여러 개의 조인을 파이프라인 방식으로 처리할 수 있다. 다중 조인은 파이프라인 방식 처리는 조인 중간 결과를 디스크를 통하지 않고 다른 프로세서에게 직접 전달하므로 효율적이다. Shared nothing 다중 프로세서 구조는 대용량 데이타베이스를 처리하는데 확장성은 좋으나 자료 불균형 분포에 매우 민감하다. 파이프라인 해시 조인 알고리즘이 동적 부하 균형 유지 메커니즘을 갖고 있지 않다면 자료 불균형은 성능에 매우 심각한 영향을 줄 수 있다. 본 논문은 자료 불균형의 영향과 제안된 두 가지 기법을 비교하기 위하여 파이프라인 세그먼트의 실행 모형, 비용 모형, 그리고 시뮬레이터를 개발한다. 다양한 파라미터로 모의 실험을 한 결과에 의하면 자료 불균형은 조인 선택도와 릴레이션 크기에 비례하여 시스템 성능을 떨어뜨림을 보여준다. 그러나 제안된 파이프라인 해시 조인 알고리즘은 다수의 버켓 사용과 분할의 조율을 통해 자료 불균형도가 심한 경우에도 좋은 성능을 갖게 한다.

고해상도 탄성파 자료를 이용한 부산 수영만의 퇴적층서 연구 (Study of Sedimentary Deposits using High Resolution Seismic data in Suyeong Bay, Busan)

  • 서영교;이광수;김대철;이희일
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제14권2호
    • /
    • pp.81-92
    • /
    • 2011
  • 부산 수영만의 퇴적환경을 파악하기 위해 고해상도 탄성파 자료(chirp and sparker system)를 활용한 해석을 실시하였다. 연구해역의 퇴적단위는 음향기반을 피복하는 세 개의 퇴적단위(SU1a, SU1b, SU2)로 구성되며 각각의 퇴적단위는 침식 부정합면에 의해 구분된다. 최하부의 SU1a는 음향학적으로 평행하고 연속적인 내부 반사면의 특징을 가지며, 상부의 SU1b는 불규칙한 내부 반사면을 보인다. 최상부 퇴적단위인 SU2는 탄성파 단면상에서 투명 음향상 특징을 가진다. 음향기반 상부경계면은 침식 부정합면의 특징을 보이며 동쪽으로 향하면서 깊어지는데, 이는 인접한 수영강의 영향에 의한 것으로 생각된다. 이 침식면 상부에 퇴적된 SU1a와 SU1b는 저지대를 충진하는 형태로 분포한다. SU2는 연구해역 전반에 걸쳐 광역적으로 나타난다. 본 연구에 활용된 고해상도 탄성파 자료는 수영만의 퇴적환경 및 역사에 대한 중요한 정보를 제공하였으며, 그 결과 해수면 변동, 염하구 환경 및 인접 하천에서의 육상기원 퇴적물 유입 등이 연구해역의 주요 퇴적기작에 해당하는 것으로 해석된다.

자속구속형 초전도 전류제한기의 철심조건에 따른 특성 (Characteristics of the Flux-lock Type Superconducting Fault Current Limiter According to the Iron Core Conditions)

  • 남긍현;이나영;최효상;조금배
    • 조명전기설비학회논문지
    • /
    • 제20권7호
    • /
    • pp.38-45
    • /
    • 2006
  • 초전도전류제한기(SFCL)는 전력계통내 적용시 계통보호를 보다 향상시킬 수 있는 방안으로써 수초이내에 신속하게 사고전류를 제한한다. 이러한 SFCL중 자속구속형 전류제한기의 설계구조는 자속구속리액터인 하나의 철심에 1차측과 2차측 코일이 병렬로 결선되어 있다. 또한 전류제한소자인 YBCO박막과 2차측 코일을 직렬로 결선하여 설치장소의 조건에 따라 인덕턴스와 2차측 코일의 극성방향으로 과도전류 크기를 조절할 수 있다. 이러한 동작특성은 철심을 자속매개체로 적용되기 때문에 철심조건에 따른 성능평가실험은 필수적이다. 가극결선에서 전원전압을 200[Vrms] 인가시 피크전류는 폐루프가 30.71[A], 개루프가 32.01[A]까지 상승됨에 따라 초기과도 응답특성은 폐루프가 유리하였다. 하지만, 소자에 발생되는 전압이 폐루프가 220.14[V], 개루프가 142.73[V]까지 상승함에 따라, 폐루프 철심구조시 전류제한소자의 부담이 가중됨을 알 수 있었다. 결과적으로 자속구속형 SFCL의 전력계통내 적용 시 각각의 철심구조에 따른 다양한 운전특성을 적절히 설계시 장점을 극대화 할 수 있을 것이다.

MPEG-2 TS 기반의 UHDTV 다중화 (Multiplexing of UHDTV Based on MPEG-2 TS)

  • 장의덕;박동일;김재곤;이응돈;조숙희;최진수
    • 방송공학회논문지
    • /
    • 제15권2호
    • /
    • pp.205-216
    • /
    • 2010
  • 본 논문에서는 UHDTV(Ultra HDTV)를 위한 MPEG-2 Transport Stream(TS)의 다중화 기법 및 다중화 SW 툴의 설계 및 구현에 대해서 기술한다. 대용량의 UHD 비디오를 처리하기 위해서는 당분간 병렬처리에 기반한 코덱 구현이 불가피하며 이로 인해 다수의 비디오 비트스트림 간의 동기화 및 다중화가 요구된다. 본 논문에서는 4K(또는 8K) 해상도의 UHD 비디오가 4 개의 화면으로 분할되어 각각 H.264/AVC로 부호화되고, 2 개의 5.0 채널의 오디오가 AC-3로 부호화되는 병렬처리 기반의 UHDTV의 TS 다중화를 고려한다. H.264/AVC와 AC-3를 TS로 전송하기 위한 MPEG-2 시스템(Systems) 확장 규격을 반영한 PES 패킷화 및 TS 다중화 툴을 설계한다. 또한 T-STD(TS System Target Decoder)의 타이밍 모델을 만족하도록 T-STD에 정의된 버퍼들의 상태를 모니터링 하면서 다중화 스케쥴링을 수행하고, 한 TS 패킷의 전송 시간 단위로 H/W의 실시간 처리를 에뮬레이션(emulation)하도록 구현한다. UHDTV 다중화를 위해서 재다중화(Re-multiplexing)를 포함하는 UHD 재다중화와 단일 TS로 다중화하는 UHD 프로그램 다중화의 2 가지 구조를 구현하고 이들의 장단점에 대해서 고찰한다. 본 논문에서 설계 구현된 TS 다중화 툴은 상용 분석 툴 및 실시간 재생 툴을 이용하여 규격 및 타이밍의 적합성과 그 기능을 검증한다.

2종의 임플란트 내부결합구조체에 따른 치조골상 유한요소응력 분석 (Finite Element Stress Analysis of Bone Tissue According to the Implant Connection Type)

  • 변욱;정다운;한인혜;김성량;이창희
    • 구강회복응용과학지
    • /
    • 제29권3호
    • /
    • pp.259-271
    • /
    • 2013
  • 임플란트 고정체-지대주 결합구조체의 형태에 따른 교합부하의 반응이 다양하여 본 연구에서는 하중위치 및 결합구조체 접촉 비율에 따라 3단 계단형 결합구조체와 경사형에서 어떠한 차이가 있는 지를 3차원 유한요소분석을 시행하였다. 2종의 임플란트-지대주 결합 구조체에 연결된 상부 치관을 제작하여 각 치관에 설정된 하중위치에 200 N의 하중을 부여하였다. 임플란트 중심 부위에서 하중조건이 멀어질수록 피질골정에 가해지는 응력이 증가되기에 하중조건은 응력발생에 영향을 미치는 주요 요소이며 다음으로 결합구조형태에도 영향을 받았다. 또한 수직 하중에 비해 빗금 경사 하중이 부여된 경우 계단형은 경사형에 비해 유리한 응력 분포를 보였다. 그리고 지대주 결합구조체가 고정체의 내벽에 대해 접촉이 많아 질수록 골질에 대한 응력분산이 유리한 것으로 나타났다. 결론적으로 고정체 폭경에서 벗어난 빗김 수직 및 경사 하중은 결합구조체의 종류와 관계없이 피질골정에 응력을 집중시키므로 저작기능시 교합접촉면을 고정체의 폭경 내에 위치하도록 하는 것이 생체역학적으로 바람직 할 것으로 사료되었다.

분포형 강우유출모형(K-DRUM)의 병렬화 효과 분석 (The Parallelization Effectiveness Analysis of K-DRUM Model)

  • 정성영;박진혁;허영택;정관수
    • 대한공간정보학회지
    • /
    • 제18권4호
    • /
    • pp.21-30
    • /
    • 2010
  • 본 연구에서는 기존에 개발된 GIS 기반의 분포형 강우유출모형(K-DRUM)이 대유역에서 많은 계산시간을 요구하는 단점이 있기 때문에 이를 개선하기 위하여 MPI(Message Passing Interface)기법을 적용한 병렬 K-DRUM모형을 개발하였다. K-DRUM 모형은 홍수기동안의 지표흐름과 지표하 흐름의 시간적 변화와 공간적 분포를 모의할 수 있으며, 전처리과정으로서 ArcView를 이용하여 모형에 필요한 ASCII형태의 입력 매개변수 자료들을 가공하였다. 개발된 병렬 K-DRUM 모형을 이용하여 남강댐유역에서 2006년 태풍 '에위니아' 사상을 대상으로 다양한 영역분할을 통한 유출계산 검토를 하였다. 영역분할 개수에 따른 병렬화 효과를 검토하기 위하여 분할 개수를 1개에서 25개까지 증가시키며 클러스터 시스템에서 유출모의를 수행하였다. 모의결과 영역분할 개수가 증가할수록 컴퓨터 메모리의 개수가 감소하게 되고, 이에 따라 모의수행시간 역시 감소함을 알 수 있었다. 또한 본 연구에서 영역분할 계산방식을 채택함에 따라 영역의 접합부분에서 발생 가능한 유출량 계산오차를 최소화하기 위한 기법을 제시하였다. 유출량 계산오차 발생을 최소화하기 위해서는 단위 계산시간당 영역간 정보교환과 내부유출량 계산을 최소3회 반복하여야 함을 알 수 있었다.

일제강점기 거문도 근대화 과정 -사회구조를 중심으로 - (The process of modernization of Geomundo during Japanese colonial period : focused on social structure)

  • 박민정;박순호
    • 한국지역지리학회지
    • /
    • 제22권1호
    • /
    • pp.36-48
    • /
    • 2016
  • 본 연구는 거문도를 사례로 근대화 과정에 대하여 사회구조를 중심으로 분석하였다. 먼저 근대화 이전 거문도의 사회구조는 하나의 마을을 기본적인 공간단위로 하는 공동체 의례와 조직에 기초한 전통적인 사회로 각 마을은 상대적으로 독립적이고 병렬적인 공간구조를 형성하였다. 그러나 일본인의 이주라는 일제에 의한 강제된 근대화로 기존의 마을과는 별개로 형성되는 집단거주공간을 중심으로 근대화가 이식되고 확산되었다. 그 과정에서 개별 거주지 간 의 연계성이 강화되면서 공동체 의례뿐만 아니라 새로운 근대적 사회조직의 출현과 그 성격도 변화하였다. 그 후 근대화 토착화기에는 선진어업기술 및 유통체계의 근대화에 따른 자본주의적 생산체제로의 전환으로 일상생활 전반에 걸쳐 근대적 규범이 정착되었다. 그럼에도 불구하고 일제 강점기 후반에는 관변조직 뿐만 아니라 각종 자생적 자치조직까지도 식민지 수탈정책을 보조하는 근대화에 역행하는 조직으로 전락하였다. 공간구조는 공동체의 영역 및 구성원의 외연적 확대로 마을 간의 연계성이 강화된 위계적인 구조로 재생산되었다. 그러나 일제강점기의 '강제된 근대화'라는 한계성으로 기존의 자율적이고 자생적 조직의 해체에 따른 지역공동체 의식의 붕괴라는 부작용을 극복하지 못하였다.

  • PDF

The Critical Roles of Zinc: Beyond Impact on Myocardial Signaling

  • Lee, Sung Ryul;Noh, Su Jin;Pronto, Julius Ryan;Jeong, Yu Jeong;Kim, Hyoung Kyu;Song, In Sung;Xu, Zhelong;Kwon, Hyog Young;Kang, Se Chan;Sohn, Eun-Hwa;Ko, Kyung Soo;Rhee, Byoung Doo;Kim, Nari;Han, Jin
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제19권5호
    • /
    • pp.389-399
    • /
    • 2015
  • Zinc has been considered as a vital constituent of proteins, including enzymes. Mobile reactive zinc ($Zn^{2+}$) is the key form of zinc involved in signal transductions, which are mainly driven by its binding to proteins or the release of zinc from proteins, possibly via a redox switch. There has been growing evidence of zinc's critical role in cell signaling, due to its flexible coordination geometry and rapid shifts in protein conformation to perform biological reactions. The importance and complexity of $Zn^{2+}$ activity has been presumed to parallel the degree of calcium's participation in cellular processes. Whole body and cellular $Zn^{2+}$ levels are largely regulated by metallothioneins (MTs), $Zn^{2+}$ importers (ZIPs), and $Zn^{2+}$ transporters (ZnTs). Numerous proteins involved in signaling pathways, mitochondrial metabolism, and ion channels that play a pivotal role in controlling cardiac contractility are common targets of $Zn^{2+}$. However, these regulatory actions of $Zn^{2+}$ are not limited to the function of the heart, but also extend to numerous other organ systems, such as the central nervous system, immune system, cardiovascular tissue, and secretory glands, such as the pancreas, prostate, and mammary glands. In this review, the regulation of cellular $Zn^{2+}$ levels, $Zn^{2+}$-mediated signal transduction, impacts of $Zn^{2+}$ on ion channels and mitochondrial metabolism, and finally, the implications of $Zn^{2+}$ in health and disease development were outlined to help widen the current understanding of the versatile and complex roles of $Zn^{2+}$.