• 한국통신학회논문지
• /
• 제25권9A호
• /
• pp.1359-1367
• /
• 2000

본 논문에서는 새로운 staggered burst 파일렷(SBP)의 개념을 도입하여 CDMA uplink 채널 구조를 제안하였다. 즉, 데이터 채널과 병렬로 파일럿 채널을 두고 셀상의 이동체 들이 파일럿을 staggered 형태로 공유하는 구조이다. 이를 위한 recursive DBCE 알고리듬에 의한 coherent 검출 기법을 제안하고 분석하였다. 본 방법은 uplink 채널 상에서 파일럿 burst가 주기적으로 가해지므로 이전의 오동작에 대해 스스로 정상적으로 복귀되는 특정을 가지며 이로 인해 가우시언 잡음이나 도플러 전이효과에 매우 안정적으로 동작함을 입증하였다. 실험 결과에 의하면 burst 파일럿 개념을 도입함으로써 $E_{b}/N_{o}$가 0.068dB로 무시할만한 손실을 가짐을 보였다. 또한 도플러효과에 대한 실험에 있어서 이동체가 160Km/H로 주행 시 이상적인 coherent 검출 기법과 비교했을 때 required $E_{b}/N_{o}$는 2.0dB 이하로 저하되었다. 제안된 SBP 방법은 DBCE를 위한 별도의 correlator가 필요함에도 불구하고 매우 간단히 구현할 수 있는 장점을 지니고 있으며 기존의 내부, 또는 외부적인 파일럿을 가진 다른 coherent 검출기에 비하여 좋은 성능을 가점을 보였다.

• 한국통신학회논문지
• /
• 제29권12C호
• /
• pp.1617-1622
• /
• 2004

무선단말기용 오디오 복호화기는 무선이동환경의 특성상 낮은 전력소모가 요구된다. 단일 RISC 프로세서를 이용하며 비디오/오디오 신호를 처리하는 기존의 구현은, RISC 프로세서의 연산부담이 과도하여 실시간 밀터미디어 서비스를 지원하기에는 효율적이지 못하고 캐쉬 메모리가 충분하지 않은 경우 잦은 캐쉬-미스로 인하여 전력소비량이 증가하게 된다. 본 논문에서는 무선단말기를 위한 MPEG/Audio 복호화기를 설계하자 MAC 연산에 최적화된 DSP 블록이 내장된 RISC 프로세서를 이용하여 복호화 시스템을 구현하였다. 오디오 복호화 과정을 연산중심부분과 제어중심부분으로 분할하고, 각각 DSP 블록과 RISC 프로세서에 할당하여. 병렬적으로 처리할 수 있도록 알고리듬을 설계하였다. 제안된 시스템은 MP3와 AAC 복호화 과정을 각각 17MHz, 24MHz로 처리한다. 이것은 단일 RISC 프로세서의 구현에 비하여 각각 48%와 40% 감소한 것이다. 오디오 신호처리에 최척화된 DSP 블록이 내장된 RISC 프로세서를 이용하는 것은 자원의 효율적인 이용이 가능하고, 캐쉬 메모리가 크지 않은 휴대용 멀티미디어 시스템에 적합하다.

• 한국통신학회논문지
• /
• 제34권5B호
• /
• pp.469-479
• /
• 2009

GEM 프레임은 G-PON 시스템에서 가변 사용자 데이터를 전달하는 수단이며 헤더와 유료부하로 구성된다. 헤더의 HEC 필드는 헤더의 내용을 보호하고 동시에 GEM 프레임 동기를 유지할 목적으로 사용된다. 수신 중에 GEM 프레임 동기를 잃어버리면 다시 동기를 획득 할 때까지 프레임들은 폐기되어야 한다. 따라서 손실되는 프레임의 수를 최소화하기 위해서는 고속의 동기모듈이 필요하다. 본 논문에서는 GEM 헤더에 검출이 불가능한 에러가 나타났을 때 발생하는 프레임 손실을 줄이기 위하여 주 상태머신 이외에 부 상태머신의 사용을 제안하고 이를 구현한다. 또한 헤더의 시작점을 찾는데 있어서 고속이며 동시에 효율적인 병렬 구조를 제안한다. 최종적으로, 제안된 방식은 FPGA를 통해 구현하였고 계측기를 이용하여 검증한다.

• 한국통신학회논문지
• /
• 제35권1C호
• /
• pp.45-54
• /
• 2010

이 논문에서는 다중사용자 (multi-user) 다중안테나 (multiple-in multiple-out : MIMO) 시스템을 위한 전송기법을 제안한다. Costa가 증명한 더티페이퍼코딩 (dirty-paper coding: DPC)이론에 따르면 송신기가 수신기의 가우시안 분포를 갖는 간섭 신호를 알고 있는 경우 간섭 신호에 상관 없이 채널 캐패시티를 얻을 수 있음이 알려져 있다. 단독사용자 채널의 경우 간단하며 효율적인 DPC기법들이 알려져 있으나 다중사용자 환경에는 실제 구현하는데 있어 복잡도와 관련해 많은 문제를 가지고 있다. 이 논문에서 우리는 다중사용자 환경에서 송신기에 알려진 갑선신호를 효율적으로 제어할 수 있는 네트워크 채널 행렬 삼각화 (network channel matrix triangulation: NMT)기법을 제안하고자 한다. 제안하는 NMT 알고리즘은 다중사용자 MIMO 채널을 서로 독립된 병렬의 Single-input Single-output (SISO) 채널들로 변환하여 단독사용자 환경을 위해 제안되어 있는 기존 DPC기법들을 다중사용자 환경에서도 사용 가능케 한다. 시뮬레이션 결과를 통해 제안된 알고리즘이 다중사용자 환경의 채널 캐패시티에 거의 접근함을 보일 것이다.

• Human Ecology Research
• /
• 제56권3호
• /
• pp.247-262
• /
• 2018

This study investigates the process of PCK formation for 2017 novice teachers in Busan. This study was conducted parallel to quantitative research using the H-PCK measurement tool as well as qualitative research methods through an open questionnaire and after-interview. Consequently, the H-PCK level of novice teachers was 3.51. The knowledge of perspective on home economics education (KP) was 3.87, knowledge of home economics curriculum (KC) was 3.37 and the knowledge of home economics instructional strategies (KI) was 3.39. Study participants reported that curriculum knowledge, curriculum content knowledge, and teaching strategy knowledge were formed through preparation for appointment; however, it was not possible to judge if PCK was formed for the restructuring ability or the reconstruction ability. Knowledge related to curriculum content was learned through teacher training, internet teacher community, and internet information materials. Knowledge of teaching strategies was learned through 1-2 teaching consulting or peer scholarship. It is necessary to revise the university curriculum (such as expansion of curriculum education, expansion of experience in teaching practice, and actual case study) order to form PCK. Second, it should be developed and operated various training programs for the formation of home economics education curriculum knowledge. Third, it is necessary to organize a nationwide system to support the mentor. In the future, it is necessary to study PCK analysis for each unit and topic as well as to explain methods that can be provided to field teachers.

• 대한예방한의학회지
• /
• 제6권2호
• /
• pp.36-47
• /
• 2002

Over thousands of years oriental traditional medicine has developed a theoretical and practical approach to treat and prevent diseases and to promote people's health in China and Korea. In China, the integration of traditional Chinese medicine into the national healthcare system began in the late 1950s. This was in response to national planning needs to provide comprehensive healthcare services. On contrary to China, South Korea established the parallel operation of two independent medical systems in 1952. Hence there has been a political conflict between oriental and modern medicine over issues of fee, the ability to sell and prescribe herbal medicines, and the licensing of practitioners in traditional medicines. Given this background. This study is to compare peoples' attitudes and opinions for oriental traditional medicine by ethnicity (Chinese, Korean-Chinese and Korean). Chinese and Korean-Chinese were more used and satisfied with traditional medicine treatment and traditional practitioners compared with Koreans. The proportion of Koreans who reported the cost of traditional treatments was expensive was higher than those of Chinese and Korean Chinese. Most of Chinese, Korean-Chinese, and Koreans reported that they would use traditional medicine: 1) when they would have some disease to be treated best through traditional medicine; and 2) when traditional practitioner had a reputation and lots of experiences for those diseases. Most Korean people reported that oriental and western practitioners should cooperate each other to improve the quality of care. Therefore, policy framework including integration of traditional and western medicine, regulation, etc. is needed. In addition, research is needed to determine which diseases is treated best through traditional medicine.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2000-2006
• /
• 2011

Asynchronous phenomenon occurs on the synchronous generators under power system when a generator's amplitude of electromagnetic force, phase angle, frequency and waveform etc become different from those of other synchronous generators which can follow instantly varying speed of turbine. Because the amplitude of electromagnetic force, phase frequency and waveform differ from those of other generators with which are to be put into parallel operation due to the change of excitation condition for load sharing and the sharing load change, if reactive current in the internal circuit circulates among generators, the efficiency varies and the stator winding of generators are overheated by resistance loss. Where calculation method of protection settings and Logic for Protection of Generator Asynchronization will be recommended, A distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, Zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome asynchronizing protection this paper describes an improved backup protection coordination scheme using a new Logic that will be suggested.

• 조명전기설비학회논문지
• /
• 제12권1호
• /
• pp.35-44
• /
• 1998

본 연구에서는 전류스트레스 및 필터소자의 용량저감을 고려한 다이오드 정류기의 입력LC필터 설계법을 기술하였다. 입력교류전류의 제3고조파 성분에 대하여 무한한 임피던스를 갖도록 LC병렬 공진회로와 출력측 직류콘덴서로 구성된 새로운 필터를 단위법(Per Unit)에 의해 설계하였다. 제안된 LC필터를 다이오드정류기에 적용하여 정상상태에서 실험한 결과, 입력교류전류의 제3고조파성분을 8.8〔%〕로 감소시켰으며, 입력역률은 종전의 표준형의 입력역률이 0.76인데 비하여 0.913으로 개선시켰다. 또한 필터소지자의 전압.전류용량감소와 함께, 설계된 입력LC필터는 다이오드 정류기계통에 악영향을 미치지 않았으며, 따라서 종래의 표준형 LC필터에 의한 방법과 비교하여 제안된 방법이 83.5〔%〕의 저용량의 필터로도 고역률의 정류가 가능함을 입증하였다.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• 제1호
• /
• pp.89-101
• /
• 2001

The purpose of this study ins to verify the characteristic location of Byungyoung Castle, physical type, inside spatial organization, and the scheme of Byungyoung Castle. The study utilizes historic literature, ancient maps related to Byungyoung Castle, topographical and cadastral maps which were published under the rule of Japanese Imperialism Castle, topographical and cadastral maps which were published under the rule of Japanese Imperialism and the topographical maps which were made recently by National Geographic Institute with various scales. The methodology of the study is to interpret the contents from the historic literature on the site map. The methodology of the study is to interpret the contents from the historic literature on the site map. The result of the study is as follows; Byungyoung Castle does duty as a defensive base for the entire country and has a specific character of location that has the dual function of a mountain fortress for national defense and of a village fortress for the town. Byungyoung Castle has four gates on four sides and has a oval shape very close to a circular form. The road construction inside the castle is composed basically of a cross shape. Byungyoung is located in the northwest area of this major road system. The private houses that lie along the north-south road are build up at the core area of the lower level and the town market built up around the south gate becomes the heart of life for the people. Schematically, it has the same pattern as regular village fortress, in that the houses for the guests and the houses for the public office are arranged to the east and the west. It is considered that there is certain functional parallel between Byungyoug Castle and Ulsan castle because there are no facilities for sacrificial rites no institutional budding.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.3-8
• /
• 2006

The next decade promises drastic improvements and additions to global navigation satellite systems (GNSS). Plans for GPS modernization include a civilian code measurement on the L2 frequency and a new L5 signal at 1176.45 MHz. Current speculations indicate that a fully operational constellation with these improvements could be available by 2013. Simultaneously, the Galileo Joint Undertaking is in the development and validation stages of introducing a parallel GNSS called Galileo. Galileo will also transmit freely available satellite navigation signals on three frequencies and is scheduled to be fully operational as early as 2008. In other words, a dual system receiver (e.g., GPS+GALILEO) for general users can access six civil frequencies transmitted by at least fifty eights navigation satellites in space. The advent of GALILEO and the modernization of GPS raise a lot of attention to the study of the compatibility and interoperability of the two systems. A number of performance analyses have been conducted in a global scale with respect to availability, reliability, accuracy and integrity in different simulated scenarios (such as open sky and urban canyons) for the two systems individually and when integrated. Therefore, the scope of this article aims at providing the technical benefits analysis for Taiwan specifically in terms of the performance indices mentioned above in a local scale, especially in typical urban canyon scenarios. The conclusions gained by this study will be applied by the Land Survey Bureau of Taiwanese as the guideline for developing future GNSS tracking facilities and dual GNSS processing module for precise surveying applications in static and kinematic modes.